The "Duh!" thread (aka the Doh! thread)

Rich O Brien · 22 Jun 2015, 19:42

why not use a component library of predefined sizes?

JQL · 22 Jun 2015, 21:32

Well that would work with one component alone if you one unit. Insert it at point scale it using CTRL and SHIFT input your dimension.

derei · 3 Jul 2015, 15:46

I just "Discovered" the wheel...
using "deg" or "mm" when setting the camera focal distance, can switch between actual focal distance (35mm equiv) and fov (field of view) measured in degrees.

Pixero · 4 Jul 2015, 10:15

I have to add one I discovered the other week by pure accident.
Right click on a toolbar to see a list of all loaded and unloaded toolbars.

pilou · 4 Jul 2015, 12:23

@unknownuser said:

Right click on a toolbar

On toolbars on The Main toolbar! Not on any toolbars floating on the screen!

pbacot · 4 Jul 2015, 14:40

@pixero said:

I have to add one I discovered the other week by pure accident.
Right click on a toolbar to see a list of all loaded and unloaded toolbars.

I don't think so on a Mac. (SU toolbars and windows on Mac are junk).

JQL · 5 Jul 2015, 10:51

@pbacot said:

I don't think so on a Mac. (SU toolbars and windows on Mac are junk).

I'd say the only thing I envy from SU for Mac is pdf import... we don't get that on windows

david_h · 8 Oct 2015, 19:11

I'm posting my query here because it is probably pretty obvious to you guys out there, but I've always struggled with it. . .

I've always found the "Scenes" menu to be counter-intuitive and I can't seem to get it to do what I think it is telling me to do. Specifically, I want one particular scene to be a section but not others I update via the scenes menu, and ONLY that scene but when I tab thru the others the section plane is still active and I have to switch it off. what am I doing wrong. Likewise for things like various styles, or display modes, etc.

Please help me so I can slap my head and go "DUH!"

Thanks,

David H

ps My last query got absolutely no response whatsoever. Still looking for some insight on that as well.

Thx,

D

gonashvili · 8 Oct 2015, 20:22

I've got a question about [regular] selecting, or deselecting, rather. You hit he SHIFT key and it works as +/-, right? Is there a way to have just the 'MINUS' function, so you actually ONLY deselect?
Cause, when you select some objects and then when you want to deselect you actually might select some undesirable ones, know what I mean? Especially when there are a lot of lines or what not.... It actually acts as an INVERSION, rather than just DESELCTION.

massimo · 8 Oct 2015, 20:25

shift= +/-
ctrl+shift= -
ctrl= +

gonashvili · 8 Oct 2015, 20:41

Oh!!! Hah, thanks a lot man!

I mean, DOH! of course.

JQL · 9 Oct 2015, 00:13

@david_h said:

Specifically, I want one particular scene to be a section but not others I update via the scenes menu, and ONLY that scene but when I tab thru the others the section plane is still active and I have to switch it off.

Basically, you're missing the meaning of having those checkboxes checked.

What they mean is:

When you're creating a scene only the settings that are checked will be stored. All unchecked settings will be not be stored. (Checking sections box on will store current sections settings. If you have an Active section it will be the active section for the scene. If you have no active section, the scene will have no section affecting it. If there are no sections in the scene, then you'll also have no section affecting it.)
When you have settings unchecked, then you're not storing a state for that section on the scene. (Unchecking Sections will make the scene don't care if a section is active or not. If you insert a section in the model, the scene will be cut, if you change to another scene and come back to this scene, the section from the other scene will still be active, if you change to a scene that has no active section, coming back will keep the scene without an active setting.) Unchecked settings are, therefore, neutral. They can be either on or off, depending on what was the current state when you changed to that scene...

So, in fact, unchecking sections will not make the model fully viewable. It will "randomize" the sections on that scene, unless you know what you're doing, you'll have no control.

david_h · 9 Oct 2015, 14:07

@jql said:

It will "randomize" the sections on that scene, unless you know what you're doing, you'll have no control.

thanks for the response. I think i got half of that. But your last sentence kinda summed it up. Is there a Tutorial or something that talks about this? I thought it was much simpler and clearer back in the old days when these were called "Pages". Seemed to work better.

JQL · 9 Oct 2015, 14:21

David, send me your file, I'll configure it, and send it back. Name the Scenes wisely so I know what you're talking about and describe your issues on a PM. I'll explain exactly what I did and then you could probably understand it better.

david_h · 24 Feb 2016, 20:49

Okay . .. I just got a new computer and have reinstalled SU. A lot of this stuff I did so long ago that I can't remember anymore how I did it. My problem here is I had a shortcut for edge style by exis that shows the axes in their respective green, red and blue colors. It used to be accessed via "View>Rendering>Axis"

But on my new download of SU that is no longer there! Any ideas how I can shortcut this?

Thx,

D

Charlie__V · 24 Feb 2016, 22:34

@david_h said:

Okay . .. I just got a new computer and have reinstalled SU. A lot of this stuff I did so long ago that I can't remember anymore how I did it. My problem here is I had a shortcut for edge style by exis that shows the axes in their respective green, red and blue colors. It used to be accessed via "View>Rendering>Axis"

[attachment=2:1fhbp1h6]axis_1.png[/attachment:1fhbp1h6][attachment=1:1fhbp1h6]axis_2.jpg[/attachment:1fhbp1h6]

But on my new download of SU that is no longer there! Any ideas how I can shortcut this?

Thx,

D

Should be there....I just checked on my install (SU Pro 2016)

david_h · 25 Feb 2016, 15:10

Yeah. .. my menu shows that as well, and set the old shortcut accordingly, but problem is. . .there is no View/Rendering .. . on the pull down. It's like that has gone away. Regardless, the shortcut doesn't work. .. cuz it seems that the path is wrong.

So i have to go thru the styles dialogue to change it manually. Bit of a pain. Like I said.. . i haven't had to worry about this for years, so I have forgotten a lot of this stuff.

TIG · 25 Feb 2016, 15:24

Some shortcut-able commands simply don't [now] appear in the main menus.
And the View/Rendering/Edge/By Material is one such...
It is accessed via the Style > Edit panel...
But by using the 'filter' you can get the command to list, then select it and [re]set the desired shortcut to it...

david_h · 25 Feb 2016, 17:01

Thx TIG . . .unfortunately the Shortcut will take me to the menu, but I still have to do the manual switching to color by axis. .. which for as often as I use it is okay, but it is kinda frustrating that they fix what ain't broke.

ely862me · 10 Mar 2016, 20:36

You can force axis inference with the rotate tool by tapping the arrow keys !!
You can edit the component settings in the In model components Edit !
You can change the component axes from the inside of the component by right clicking outside the geometry.

DUH!!