Sketchup 2013 issues
-
I am working on it as we speak. It is a highest priority for me to fix it.
Please hold off with the full switch to SU2013.
This shouldn't stop you from testing the new version, but at the moment Thea is not correctly reading materials inside SU2013 for Mac.
I hope the fix will be ready in few days. -
Thanks Tomasz, both for your quick reply, and all your hard work.
Think I'll just hang on. -
I reinstalled Twilight and it seems to be working as expected. Profile Builder's preview window is broken.
-
@arcad-uk said:
I reinstalled Twilight and it seems to be working as expected. Profile Builder's preview window is broken.
Here's the fix.
-
I have a bit of a problem with which I hope you guys can help . .
I downloaded 2013 for a minute, but changed my mind and off-loaded it immediately. (Nothin' against 13 per se I just didn't have time to play with it and decided to download it later) I did nothing else with my file structure. SU 8 still in tact, etc.
However . . .now all of my SKP files have been Hi-jacked by Google as the Default program and the "open with" won't let me changeit back to SU for some reason. So I have to open SU first and then hunt for the file thru the "Open" pull down in SU rather than just double-click on the file itself to open it.
Any ideas on how to fix this?
Thx in advance.
David
-
use that browse feature to find the SU V8 exe and then make sure that "Always use this application is checked" it should then default back to SU8.
-
It doesn't remember your setting after you've browsed your way to Sketchup.exe?
-
You also might try the down arrow just under Chrome, (Other Programs) it may show SketchUp with out browsing to it.
-
@krisidious said:
use that browse feature to find the SU V8 exe and then make sure that "Always use this application is checked" it should then default back to SU8.
@unknownuser said:
It doesn't remember your setting after you've browsed your way to Sketchup.exe?
@krisidious said:
You also might try the down arrow just under Chrome, (Other Programs) it may show SketchUp with out browsing to it.
Tried that several times. . .and it won't let me select Sketchup.exe or remember it. I will give it another go based on your suggestions.
Thanks guys.
D
UPDATE . .when I click the down arrow to show additional programs. . .Sketchup Doesn't show up. -
@unknownuser said:
@krisidious said:
use that browse feature to find the SU V8 exe and then make sure that "Always use this application is checked" it should then default back to SU8.
@unknownuser said:
It doesn't remember your setting after you've browsed your way to Sketchup.exe?
@krisidious said:
You also might try the down arrow just under Chrome, (Other Programs) it may show SketchUp with out browsing to it.
Tried that several times. . .and it won't let me select Sketchup.exe or remember it. I will give it another go based on your suggestions.
Thanks guys.
D
UPDATE . .when I click the down arrow to show additional programs. . .Sketchup Doesn't show up.You're right... I just tried it and it won't go back to SU V8. This is not good.
-
Google want it back
-
@chris fullmer said:
Not a bad suggestion. Its too late at this point, but it could be a feature for the future. For now, you can differentiate by the default tool icons, if that helps.
Chris
in macs, if you have 8 and 2013 side by side on the dock, you can see that the 2013 icon is noticeably smaller thanthe previous one.
-
@rich o brien said:
Google want it back
Well that's it. I'm bolting over to Form Z--
or at least form Y --it's an earlier version. Probably cheaper.
-
@krisidious said:
You're right... I just tried it and it won't go back to SU V8.
What if you run SU 8, then close it.
Hoping it will reset the file association. At least it DOES on XP, AFAIK.
-
Dan, Yes that did fix it. SU v8 is now the default program to open SU files...
-
@krisidious said:
Dan, Yes that did fix it. SU v8 is now the default program to open SU files...
I had this happen before '13. Trird everything, after a MS update, reboot, all was fine.
It wasn't the update, just the hard re-boot. -
Did the hard re-boot. .. really hard. Steel-toed. . .
Didn't work. . .
I opened SU and ran it a bit. Closed. Did the hard re-boot. . .
Did I miss a step?
-
@unknownuser said:
Did the hard re-boot. .. really hard. Steel-toed. . .
Didn't work. . .[attachment=0:15q8qcdn]<!-- ia0 -->Capture.PNG<!-- ia0 -->[/attachment:15q8qcdn]
I opened SU and ran it a bit. Closed. Did the hard re-boot. . .
Did I miss a step?
Nope!
Sorry that what worked for me.
Did open SU8 and load some files saved/closed a few times. -
open SU V8
close it.
find a file of V8 skp and right click on it.
open with.
navigate to the V8 exe.
click ok
should open in V8 now. -
Toolbars for Plugins missing.
Loaded the following from EW:-
'Selection Toys'
'Edge Tools2'Tried un-checking then re-checking in Toolbar list. Still not visible.
I am finding this release very frustrating. EW doesn't work for me and the whole presentation is ???
If I could get the installation from EW to work I might be persuaded to continue despite the smaller awful red tool icons (not very professional).
Has anyone else had these problems?
Cheers
Penguin2
Advertisement