[Plugin]T2H_BuildingStructureTools2.2.4 in20141207

Oxer · 5 Jan 2013, 11:47

Thanks to you!!

hcltw1963 · 5 Jan 2013, 16:36

Dear Tak2hata,

Is it possible to generalize the script to use for another kind of construction type like wood? I thought that if the class name "RC_GIRDER","RC_BEAM","RC_WALL","RC_SLAB" substituted by "GIRDER","BEAM","WALL", and "SLAB", they will not be represented as RC construction only.
So, it will be useful for different kind of construction cause materials been assigned clearly.

tak2hata · 6 Jan 2013, 01:27

@hcltw1963 said:

Dear Tak2hata,

Is it possible to generalize the script to use for another kind of construction type like wood? I thought that if the class name "RC_GIRDER","RC_BEAM","RC_WALL","RC_SLAB" substituted by "GIRDER","BEAM","WALL", and "SLAB", they will not be represented as RC construction only.
So, it will be useful for different kind of construction cause materials been assigned clearly.

Hi,htcltw1963.
It is possible.
But STEEL_GIRDER,STEEL_BEAM,STEEL_COLUMN,RC_GIRDER,RC_BEAM,RC_COLUMN,WOODEN_GIRDER,WOODEN_BEAM,WOODEN_COLUMN.....
I think it too many class to select.
"ALL" CLASS with searching word can find by "TAG" and "PROFILE".

I can add the new CLASS If surely required.
But it will be very hard.I must change TABLE EDITOR,too.
If there is the request same otherwise, it will inquire collectively.

Thanks.

hcltw1963 · 6 Jan 2013, 02:28

@tak2hata said:

@hcltw1963 said:

Dear Tak2hata,

Is it possible to generalize the script to use for another kind of construction type like wood? I thought that if the class name "RC_GIRDER","RC_BEAM","RC_WALL","RC_SLAB" substituted by "GIRDER","BEAM","WALL", and "SLAB", they will not be represented as RC construction only.
So, it will be useful for different kind of construction cause materials been assigned clearly.

Hi,htcltw1963.
It is possible.
But STEEL_GIRDER,STEEL_BEAM,STEEL_COLUMN,RC_GIRDER,RC_BEAM,RC_COLUMN,WOODEN_GIRDER,WOODEN_BEAM,WOODEN_COLUMN.....
I think it too many class to select.
"ALL" CLASS with searching word can find by "TAG" and "PROFILE".

I can add the new CLASS If surely required.
But it will be very hard.I must change TABLE EDITOR,too.
If there is the request same otherwise, it will inquire collectively.

Thanks.

Thanks for reply so quickly. I think the modification is as:
STEEL_GIRDER,STEEL_BEAM,STEEL_COLUMN,GIRDER,BEAM,COLUMN,OTHER

It is because steel material has special profile, it needs independent class. The prismatic member like concrete, wood, and other can be categorized as same class. They can be identified by materials. I had experienced modifying your scripts by deleting key word "RC_" where in rubies but failed to execute. I hope the idea works for minimum modification.

chon · 7 Jan 2013, 10:11

Hello,

here a first french translation file. This is a first draft and may have mistakes, non-sences or else. This file is not my own. So frensh speaking, you can bring corrections as you want.

2013/01/07 EDIT : File reloaded with 2013/01/05 V1.6a changes included.

lang_fr.txt

chon · 7 Jan 2013, 10:29

tak2hata,

i've edited the french translation file with V1.6a changes. So, your "bst1.6a.rbz.zip" is out to date for the "lang_fr.txt" file.

A request : In windows, it would be really nice when clicking on translation link in SU open the default web browser instead of IE (i hate IE).

Many thanks for all !

tak2hata · 7 Jan 2013, 15:16

Hi,hcltw1963.
Although I think that it is a wonderful idea.
But..
After I make this tool, about two years have passed.
When the point is changed now, it has influence on what is already made model.
So,please change the "class" words by translation file.
I inquire over many hours to a slight degree.

Hi,chon.
I will improve the problem about link openning with IE.
I hate IE, too.

Thanks.

Kuddl · 2 Feb 2013, 07:48

Hi, Tak2hata

The program works fine, unfortunately not with Fredos 000_AdditionalPluginFolders.rb!What a pity! http://sketchucation.com/forums/posting.php?mode=reply&f=323&t=35798#

Best Regards
Kuddl

chooyod · 4 Feb 2013, 11:38

Hi tak2hata,
I have a problem to run the BST Table Editor, as it showing up "Script Error" on my SU8, win7 64 bits.
Please suggesting, thank you in advanced.

tak2hata · 10 Feb 2013, 07:42

@chooyod said:

Hi tak2hata,
I have a problem to run the BST Table Editor, as it showing up "Script Error" on my SU8, win7 64 bits.
Please suggesting, thank you in advanced.

Hi,chooyod.
I will test this case.
But It may be difficult for me.

Thanks.

tak2hata · 19 Feb 2013, 08:59

Hi,everyone.
I update this to version 1.7 in feb 19,2013.
Improve for 000additionalPluginFolders.
The link in list of translators will open with your current browser.
Thanks.

chooyod · 20 Feb 2013, 02:43

@tak2hata said:

@chooyod said:

Hi tak2hata,
I have a problem to run the BST Table Editor, as it showing up "Script Error" on my SU8, win7 64 bits.
Please suggesting, thank you in advanced.

Hi,chooyod.
I will test this case.
But It may be difficult for me.

Thanks.

Hi TAK2HATA,
Love your plugin, with the latest 1.7 and your effort to figure out, now the BST Table Editor is working fine.
Thank you.

BRONZY · 3 Mar 2013, 15:33

Would you be interested on modifying this on a consulting basis. We find it to be useful but it needs to be adapted to our specific needs.

deprezzar · 6 Mar 2013, 22:59

Gracias! (Thanks)

tak2hata · 9 Mar 2013, 13:39

Hi,
I update to version1.8 in Mar 09,2013.
New function and small bugfix.

Hi,BRONZY.
Your proposal is very interesting for me.
But I have my work.
And the responsibility of scripting for work is a load on my mind.
So I select scripting freely.

Thanks very much.

CTMan · 15 Mar 2013, 13:28

Hi Tak2hata

Just downloaded 1.8 version - looks fantastic yet again !

I viewed the file on youtube and noticed the toolbar on the bottom of the screen.

Can you tell me what this is please

Thanks CTMan

TIG · 15 Mar 2013, 15:01

That's my 2dTool set...

johny1964 · 18 Mar 2013, 19:33

Hi,

I have an isuue with the csv file. In which directory I have to put it?

Thx

wolfi60 · 18 Apr 2013, 14:18

Dear tak2hata,
thanks for this great tool. For all german speaking members I could write a language file. I hope it will help... This is the first time that I'm posting something in a forum, but I'got something like a Sketchup ruby fan and I'm very happy that I can download so many excellent plugins So I also want to contribute a little bit. I hope you will continue with your great work.
Greetings from werni60 (Germany)

German language file (lang_de.txt)

tak2hata · 23 Apr 2013, 16:10

@wolfi60 said:

:enlight: Dear tak2hata,
thanks for this great tool. For all german speaking members I could write a language file. I hope it will help... This is the first time that I'm posting something in a forum, but I'got something like a Sketchup ruby fan and I'm very happy that I can download so many excellent plugins So I also want to contribute a little bit. I hope you will continue with your great work.
Greetings from werni60 (Germany)

Hi,wolfi60.
Your language file for german will be include in BST next update.
It will come few days.

Thanks!