[Plugin] FredoTools - v4.5c - 24 Jun 24

Rich O Brien · 19 Dec 2011, 23:23

I won't use it

driven · 19 Dec 2011, 23:41

the pin is a great idea...

all seems to work on mac...
from additional folders on and off...

john
PS. I had to manually remove .._DIR_42, it wouldn't 'purge' from the additional folder, should it?

john

fredo6 · 19 Dec 2011, 23:44

@driven said:

PS. I had to manually remove .._DIR_42, it wouldn't 'purge' from the additional folder, should it?

Normally you don't need to remove it. It should work even if present, as 43 > 42.
Did you see it in the Purge Obsolete Files... dialog box?

Fredo

driven · 19 Dec 2011, 23:53

I saw it there, and tried both 'delete all' and then individuals 'delete' when it was the only one left.

the standalone rubies all purged fine.
john

fredo6 · 20 Dec 2011, 00:24

@unknownuser said:

Is there anyway to prevent the loading in the contextual menu? I try to keep as much as I can away from the contextual menu.

Sorry for that. I usually do it for the other plugins. So, try version 1.0b and go to the Default Parameters dialog box.

Fredo

MALAISE · 20 Dec 2011, 09:01

Nice Fredo, ........ So we have more space for drawing.

Pierre

pilou · 20 Dec 2011, 09:38

Un petit cadeau de Noël
A little Chrismas gift

erikB · 20 Dec 2011, 09:59

Very handy fredo !!!
thanks ( and happy holidays !)
erikB

Panga · 20 Dec 2011, 10:37

Thanks a lot Fredo, nice addition.

RichardCherry · 20 Dec 2011, 14:40

Thanks for the nice Christmas present
Wonderful set of tools

Vicspa · 20 Dec 2011, 14:54

Ditto Fredo

irwanwr · 20 Dec 2011, 15:01

no curviloft?

boilingsnow · 21 Dec 2011, 09:46

Can you tell why I can't load the plugin?
I have already installed the latest version of LibFredo6.

fredo6 · 21 Dec 2011, 10:12

@boilingsnow said:

Can you tell why I can't load the plugin?
I have already installed the latest version of LibFredo6.

Can you check the footprint of the files.
In the Plugins directory, you should have the Folder FREDOTOOLS_Dir_10 with all the files in it.
It looks like you have the rb files directly in the Plugins directory, not in this folder.

Fredo

boilingsnow · 21 Dec 2011, 13:02

@unknownuser said:

@boilingsnow said:

Can you tell why I can't load the plugin?
I have already installed the latest version of LibFredo6.

Can you check the footprint of the files.
In the Plugins directory, you should have the Folder FREDOTOOLS_Dir_10 with all the files in it.
It looks like you have the rb files directly in the Plugins directory, not in this folder.

Fredo

Thanks for your explanation. It works!

halroach · 25 Jan 2012, 08:10

Hi Fredo,

very nice plugin!
I've been thinking of a similar plugin, which you could incorporate into this one:

For planning and adjusting areas of a house (to suit program requirements) - it would be nice to have the option to save a selection of faces, and see how the areas update as you change them in sketchup.
You have the "areas report" window on ALL THE TIME. You select the faces and components you want once - which gives you the areas. After that you can continue editing the model and the numbers change as you drag lines and change areas - kind of like a set of "entity infos" open all the time for a specific set of pre selected faces. If it cannot be updated "live" you could have an update button (with a keyboard shortcut of course) that would update the info in the box + the different tags.

see attached mockup image (numbers are just gibberish for illustration)

you could have selection sets in pre selected colors for interiors, exteriors etc... kind of like the areas by material, but rather by custom selection.
you could have sub-totals for faces that were marked together.
selecting a face or faces in the list will mark them in the model
I noticed that if I use the standard tool for marking the area of a face in a scaled component, it will show the same area for the component in each of it's differently scaled instances (which makes sense). By what I've noticed, your plugin knows how to over come that, right?

![live or manually updated "areas report" for pre selected faces](/uploads/imported_attachments/Rgwk_preselectedfaceareas.jpg "live or manually updated "areas report" for pre selected faces")

fredo6 · 25 Jan 2012, 18:32

@unknownuser said:

For planning and adjusting areas of a house (to suit program requirements) - it would be nice to have the option to save a selection of faces, and see how the areas update as you change them in sketchup.
You have the "areas report" window on ALL THE TIME. You select the faces and components you want once - which gives you the areas. After that you can continue editing the model and the numbers change as you drag lines and change areas - kind of like a set of "entity infos" open all the time for a specific set of pre selected faces. If it cannot be updated "live" you could have an update button (with a keyboard shortcut of course) that would update the info in the box + the different tags.

This is possible, but this requires a slightly different design, especially because you need this information to be persistent across Sketchup sessions. I may give it a try whenever I have time, either as an extension of the plugin or as a new plugin.

@unknownuser said:

I noticed that if I use the standard tool for marking the area of a face in a scaled component, it will show the same area for the component in each of it's differently scaled instances (which makes sense). By what I've noticed, your plugin knows how to over come that, right?

Yes, the plugin counts the real areas within each component, taking into account the scaling factor and shear factor.

Fredo

halroach · 25 Jan 2012, 19:06

@unknownuser said:

This is possible, but this requires a slightly different design, especially because you need this information to be persistent across Sketchup sessions. I may give it a try whenever I have time, either as an extension of the plugin or as a new plugin.Fredo

That would be really cool Fredo!
I'd be glad to contribute with the conceptual design whenever you get around to it. I may have some further ideas as to how this tool could be useful, more effective and easy to use.

fredo6 · 25 Jan 2012, 19:43

@unknownuser said:

That would be really cool Fredo!
I'd be glad to contribute with the conceptual design whenever you get around to it. I may have some further ideas as to how this tool could be useful, more effective and easy to use.

Your comments are welcome. I am not really user of the tool, and it's good to hear from users who have practice and requirement about areas in Sketchup.

Fredo

DesignerPro · 28 Feb 2012, 02:25

Tried the new curveloft tool set. This is all the errors it generates when I open SketchUp.

Now WHAT?

Error Loading File bootstrap_Curviloft.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftAlgo.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftCurveMover.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftPalette.rb
uninitialized constant Curviloft::T6Error Loading File CurviloftTool.rb
uninitialized constant Curviloft::T6Error Loading File FredoTools.rb
uninitialized constant FredoTools::T6Error Loading File FredoTools__ConstructFaceNormal.rb
undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__CountFacesBySides.rb undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__CurviShear.rb
undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__MarkVertices.rb undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__RemoveLonelyVertices.rb
undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__ReportLabelArea.rb undefined method register_plug' for FredoTools:ModuleError Loading File FredoTools__RevertCurve.rb
undefined method register_plug' for FredoTools:ModuleError Loading File __loader.rb undefined method effective_load' for nil:NilClass