[Plugin][$] RoundCorner - v3.4a - 31 Mar 24

[pilou]

Yep with little measures that splatting soon as Enter!
Beginning to see the time scroll barr... then plaffffffffff!
Something like these measures for first tool!

---

FredoTraceRoundCorner.txt

---

[fredo6]

@unknownuser said:

Yep with little measures that splatting soon as Enter!
Beginning to see the time scroll barr... then plaffffffffff!
Something like these measures for first tool!

Pilou,

First, this does not seem to me to be 'little measures' but more just a normal case (5 cm on 3m).

Second, are you sure the attached file is the one corresponding to the bugsplat. Its content indicates the operation terminated normally.

Fredo

[mitcorb]

Hi, Fredo:
This tool looks interesting.
Would this be complimentary to Bevel and Round Edges by Bezier?
mitcorb

[TIG]

Here's my error message...FredoTraceRoundCorner[1mcube100mmbevel all edgesTIG].txt

[Stinkie]

I have tried it, and it works great. This ruby is an enormous time saver. Really happy with it.

[fredo6]

@boilingsnow said:

I tested it just now, it seems this ruby is still not very stable?
It couses frequently sketchup errors and the program quits automatically everytime. Sometimes even when I was just do simple round corner on two sides, not to mention other more complicated objects. Perhaps that's only my problem due to my PC or some other personal settings? I don't know.

But fredo I think you can make it better.

It seems you are one of the users who get a bugsplat with SU7 (even with simple geometry).
Would you mind to refer to this link http://forums.sketchucation.com/viewtopic.php?f=180&t=20485&st=0&sk=t&sd=a&start=15#p171844 , use the modified file and report the txt.

I am unable to reproduce the bugsplat in my environments (actually I never got a splat when writing and testing teh plugin), so I need users getting it to give me some hints on where it could come from.

Thanks

Fredo

[fredo6]

@mitcorb said:

Hi, Fredo:
This tool looks interesting.
Would this be complimentary to Bevel and Round Edges by Bezier?
mitcorb

RoundCorner includes a Sharp Mode as in RoundeEdges by Bezier. But you can keep both in parallel safely. RoundCorner also does Beveling (the green-gray icon).

[boilingsnow]

I have not tried this jet, but I am sooooooo exited that I must say something first!
I've been waiting this for ages.

Edit
I tested it just now, it seems this ruby is still not very stable?
It couses frequently sketchup errors and the program quits automatically everytime. Sometimes even when I was just do simple round corner on two sides, not to mention other more complicated objects. Perhaps that's only my problem due to my PC or some other personal settings? I don't know.

PS.
I tested it in sketchup 6 again (just now was in skechup 7), and it works nicely.
so I can imagine that the ruby still has some conflicts with sketchup 7.
But fredo I think you can make it better.

[mitcorb]

We will all be eternally grateful to you, "Mr. Wizard". Thank you again.

[boilingsnow]

@unknownuser said:

@boilingsnow said:

I tested it just now, it seems this ruby is still not very stable?
It couses frequently sketchup errors and the program quits automatically everytime. Sometimes even when I was just do simple round corner on two sides, not to mention other more complicated objects. Perhaps that's only my problem due to my PC or some other personal settings? I don't know.

But fredo I think you can make it better.

It seems you are one of the users who get a bugsplat with SU7 (even with simple geometry).
Would you mind to refer to this link http://forums.sketchucation.com/viewtopic.php?f=180&t=20485&st=0&sk=t&sd=a&start=15#p171844 , use the modified file and report the txt.

I am unable to reproduce the bugsplat in my environments (actually I never got a splat when writing and testing teh plugin), so I need users getting it to give me some hints on where it could come from.

Thanks

Fredo

Thank you for you reply.
hier is the first error report I got.

[0.000000 ms] : Sat Jul 11 00:28:24 2009 - RUBY_PLATFORM = i386-mswin32
[0.000000 ms] : Preparing geometry
[0.000000 ms] : Compute corners 24
[0.030000 ms] : Compute edge roundings 36
[0.040000 ms] : Compute triangulated 0
[0.040000 ms] : End Preparing geometry
[0.040000 ms] : Launching the processing of geometry Nbsteps = 277
[0.040000 ms] : Scheduler processing: Step = 0 ipos = 0
[0.040000 ms] : Processing chunk: Init Step = 0 ipos = 0
[0.711000 ms] : Processing chunk: Terminate Step = 0 ipos = 0
[0.711000 ms] : Processing chunk: Init Step = 1 ipos = 0
[0.731000 ms] : Processing chunk: Terminate Step = 1 ipos = 0
[0.731000 ms] : Processing chunk: Init Step = 2 ipos = 0 grptempo = #Sketchup::Group:0x11751360
[0.901000 ms] : Processing chunk: Terminate Step = 2 ipos = 0
[0.901000 ms] : Processing chunk: Init Step = 3 ipos = 0 grptempo = #Sketchup::Group:0x11751360
[0.901000 ms] : Processing chunk: Terminate Step = 3 ipos = 0
[0.901000 ms] : Processing chunk: Init Step = 4 ipos = 0 grptempo = #Sketchup::Group:0x11751360

[sepo]

Fantastic Fredo....very smart ....Thanks very much.

[Karlfucious]

Works great, Thank you VERY much.

[EscapeArtist]

As always, fantastic job Fredo. SU woudln't be what it is without all these fantastic community-made plugins.

[Jörg]

Just amazing!!!!!!!
Thank you very, very much, Fredo!!!!!
Jörg

[dylan]

Has anyone got this to work on a Mac?

I cannot get the plugin to show.

I have tried installing to the following locations:
Macintosh HD/Library/Application Support/Google SketchUp 7/SketchUp/plugins
User/Library/Application Support/Google SketchUp 7/SketchUp/plugins

[TIG]

Fredo

Splats as before, hourglass appears very briefly before splat-screen.
Here's latest report...FredoTraceRoundCorner[TIG-20090711].txt

[bagatelo]

With which words I could thank for your work, Fredo6? Simply fantastic.

And with me again, in SU 7 bug splat, SU 6, works fine.

Thanks again.

[numerobis]

WOW! This is incredible!
Great Work!
Thank You very very much!!!!

the whole skp dev team (if there is one existing - don't know, after seeing v7) should quit developing new functions and concentrate on x64 and highpoly support ...or go home instead.

Sketchup v6.9 "Community Edition" rockz!!!

[fredo6]

I have been trying in SU7 on more complex models. Still does not get a bugsplat.
On 3D letters, RoundCorner gives better results than the old RoundEdge.

---

Font = Matura MT Script - SU7 file

[bagatelo]

I have using SU 7 on Windows Vista x64 SP1 and I have always bug splat.
I have instaled Windows XP SP3 x86 on another HD and until now I don't have Bug Splat.

Maybe the problem is with Windows Vista.