@huajiet said:

@sdmitch said:

I'm hoping to set the default 'Precision' input at 20. looked into the .rb file but it's all scrambled. anyone can help?

look at this plugin:

so the animator is only for motion animation, not for physical formulas...(although I've worked in it a bit myself). Take a closer look at the MSPhysics plugin, that's where you can play with your movements to your heart's content))

Thanks for the idea, everything worked!

Oh, if I could figure out from this long list what the problem is.... but I'm not good at Ruby, I started learning it a little bit, but it's not that simple))

Perhaps somehow I will decide to gradually remove plugins to see if any of them is interfering with the Animator... But suddenly I will find answers to the problem here?))

No, no, the Animator does not cause problems, I stupidly do not see him in the Fredo collection. The sketch itself works without problems (just press ESC) And all plugins work (even those listed in this list). I just don't understand why the Animator doesn't appear at all...
and hoped that the problem could be seen in this long list... There is a suspicion that this is due to UTF encoding, because I have a verified version of the sketch 2018

sombody? please help for that (many letters upper)

I will ask a question about the animator here.
I decided to try to work with him, but I don't see him in the sketchup. Everything is installed correctly (I use a large set of plugins, maybe some of the plugins get in the way?)
LibFredo6 has been updated by your link. Maybe the problem lies in this message (it constantly pops up at startup, but does not interfere with the sketchup):
sorry for big text:
"Ошибка при загрузке файла «Fredo6_!LibFredo6.rb»

Error; #<ArgumentError; invalid byte sequence in UTF-8>
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;820;in `match'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;820;in `block (2 levels) in load_from_config'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;819;in `each'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;819;in `block in load_from_config'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;817;in `foreach'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;817;in `load_from_config'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;1232;in `block in load_all_plugins'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;1232;in `each'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6core.rbe;1232;in `load_all_plugins'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/top_libfredo6.rbe;310;in `startup'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;68;in `process'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;76;in `<module;LibFredo6_Loader>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;30;in `<top (required)>'
Ошибка при загрузке файла «Fredo6_Animator.rb»
Error; #<TypeError; can't convert nil into an exact number>
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `-'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `<top (required)>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_Animator.rb;52;in `<module;Fredo6>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_Animator.rb;28;in `<top (required)>'
Ошибка при загрузке файла «Fredo6_FredoGhost.rb»
Error; #<TypeError; can't convert nil into an exact number>
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `-'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `<top (required)>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_FredoGhost.rb;47;in `<module;Fredo6>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_FredoGhost.rb;26;in `<top (required)>'
Ошибка при загрузке файла «Fredo6_FredoGuides.rb»
Error; #<TypeError; can't convert nil into an exact number>
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `-'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `<top (required)>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_FredoGuides.rb;47;in `<module;Fredo6>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_FredoGuides.rb;26;in `<top (required)>'
Ошибка при загрузке файла «Fredo6_FredoTools.rb»
Error; #<TypeError; can't convert nil into an exact number>
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `-'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_!LibFredo6.rb;86;in `<top (required)>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/Fredo6_FredoTools.rb;25;in `<top (required)>'
Error; C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/part.rbe;6;in `<module;QCutList>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/part.rbe;4;in `<module;Labyrinth>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/part.rbe;3;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;14;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;14;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;14;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `<main>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `eval'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `load'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `register_extension'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `<module;QCutList>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;11;in `<module;Labyrinth>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;10;in `<top (required)>'
Error; #<NameError; uninitialized constant Labyrinth;;QCutList;;Part>
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/board.rbe;6;in `<module;QCutList>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/board.rbe;5;in `<module;Labyrinth>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/board.rbe;4;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;15;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;15;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;15;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `<main>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `eval'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `load'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `register_extension'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `<module;QCutList>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;11;in `<module;Labyrinth>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;10;in `<top (required)>'
Error; #<NameError; uninitialized constant Labyrinth;;QCutList;;Part>
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/sheet.rbe;7;in `<module;QCutList>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/sheet.rbe;6;in `<module;Labyrinth>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/sheet.rbe;5;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;16;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;16;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/qcutlist.rbe;16;in `<main>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `eval'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;2;in `<main>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `eval'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `load'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `register_extension'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `<module;QCutList>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;11;in `<module;Labyrinth>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;10;in `<top (required)>'
Error; C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/RubyStdLib/rubygems/core_ext/kernel_require.rb;54;in `require'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;6;in `<module;QCutList>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;4;in `<module;Labyrinth>'
c;/users/dell/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/la_cutmap/loader.rbe;3;in `<main>'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `eval'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `require'
C;/PROGRA~1/SketchUp/SKETCH~1/Tools/extensions.rb;197;in `load'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `register_extension'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;21;in `<module;QCutList>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;11;in `<module;Labyrinth>'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/la_cutmap.rb;10;in `<top (required)>'
Error; C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/PowerBar_Load.rb;1;in `eval'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/PowerBar_Load.rb;1;in `require'
C;/Users/Dell/AppData/Roaming/SketchUp/SketchUp 2018/SketchUp/Plugins/PowerBar_Load.rb;1;in `<top (required)>'"

посмотрите вот этот плагин:
take a look at this plugin:
https://www.youtube.com/watch?v=kNUZmhm6K5c

Oh, they already answered, I didn't notice

ask to save the project in an earlier version (2018), I can't open the 2021 version.

if name of the plugin "Deep Make unique", is available in the context menu, and only when there are more than one components in the project.

what is the name of the plugin?

I just go to the site (3D warehouse) , look for what you need and download
(by registering there)

посмотрите на плагин MSPhysics (free),
изучив его более детально можно будет делать движущиеся объекты.

@arquibaires said:

HOW CAN I ALPHABETICALLY ORDER THE LAYERS IN THE PLUGIN LAYERS PANEL?
THANKS

you can find the link on page 1 ))

By the way, guru in Ruby, please tell me how to add a little code so that you can change the name of the layer by pressing F2 ?
((Now it works by double-clicking, I'm more familiar with F2, and I can't substitute an addition and a check for F2 in the code in any way-it doesn't work out = little experience)

[quote="ISAWHIM"]Any chance to "fix" this so that it works in 2018+

The drop-down list has the option to select values that don't work, due to a text-issue?

("10
20
30
40
50
60
70
80
90")

10 and 90 don't work, but they are "doing something", which can be undone. However, if you don't "undo", it can break the model.
................

I fix it : in file polyreduce.rb (open wiht notepad)
at line 342 enums=[["10|20|30|40|50|60|70|80|90"]]
need make it like this : enums=[" 10|20|30|40|50|60|70|80|90 "]
and all is work.
after polyreduce need make fix model, is deleting some garbage from.
(sorry for mine english)