@unknownuser said:

Usually this occurs when tiny edges are created at the margin. I see you have corner selected as the grid origin. Have you tried using the center option? Which corner are you picking?

hi sdmith

i save as this file su 2008 :

FLOOR GENERATOR.skp

I tried use the center option and i clean this face with cleanup and inspect with edge tools and have not any tiny edge . What other suggestions do you have?

@unknownuser said:

Sorry non problem for me!

Hi pilou . your photo shows tile patern ! i have problem with wood patern .

You can tell us more about these?:

@unknownuser said:

Kill or move the Z fighting surface working and you will obtain your wanted result!

Hi pilou

thanks for "rotate multiple by Chris Fullmer" its great . This is exactly what it should be!

but The second was asking me something else.I want objects Together into a spin point .
I can not say to myself as well .Look at this video:

lumin rotate

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

MediaFire (www.mediafire.com)

thanks pilou

but I problem with wood patern ! you test this face with wood patern ?

tile patern work without texture size set ...
be like this photo :

HI

in lumion multi scale is Attractive ! when scal Selected objects Each of them are separately scale .

or When selected objects and hold "K" on keybord all selected objected rotate To a point ...

SU have plug-in for These functions?

HI

floor generator canot prosess in this face and come this error :

I want use wood sample . Where is the problem?

FLOOR GENERATOR.skp

thanks sdmitch ...

That is what it should be!

@box said:

With most path following plugins you need to be aware of the relationship between the component axes and the path. Reposition the component axes to work correctly with the path.
Right click on the original component and choose Changes Axes then click on the correct parts of your component to align it with the path.
I can't give you an example as I'm only on phone.

hi box

The result should be set axes and models.I wanted one plugin This is done automatically.
I think I was wrong And should act as in the past ,The same way that you mentioned.

and thanks alvis

@pilou said:

Curious 1001 must work ...

So...

Have you try Component Stringer by Chris Fullmer?
Or PathCopy by Rick Wilson ?

Hi pilou

component_stringer worked on segment and its not good !
but PathCopy Similar to 1001 and after the Operation I must change Content component .
I want its correct without change in Content component .

For example, see:

I use rotate and move Several times until I would have to put in the right place.If you look to the component first. rotate and move changes are clear.

hi

I want to copy a one shape along a path . with along path in 1001 bit tools Output was not good.
look at the picture :

I want others to be like the first.And move along the curve.
How do you recommend?

copy along paths.skp

@dave r said:

Sorry, Nabi. GIGO is computer nerd speak for "Garbage In, Garbage Out"

In your example, the bad geometry of your curve was creating a bad bent component.

ok dave ! get it ! thank you .

I realized that with the offset tool we can test health of workline !
It is hard for me to explain . In summary I can say Everything depends on a correct offset!

@dave r said:

So a case where GIGO reared it's ugly head.

Hi dave

My English is little poor.I did not notice you.You get guys easier to say?

@unknownuser said:

I tried the file and it worked. Albeit it worked nice once, and I couldn't repeat, so there was some issue.

hi again

solved problem and i test it again and again and again ...
There is not a problem for me anymore .
Everything was strange!

yeeeeeeeeeeee ! it is !

The problem here was exactly : ""straight line" who is in several segments"

Thanks pilou for your help .

@pbacot said:

toggle the arrow keys

Hi

I used arrow keys . But the result at best Is what you see!
Please try a file that I have uploaded.

thank you ...

HI

I am familiar with the operation of the shape bender. The thing that makes me question exactly is model uploaded .This curve will disrupt the operation of the Shape Bender.
If you want to test,do it on a file that is uploaded.

thanks TIG and sdmitch . I love the two of you. your plugin are awesome!

I came a problem. with this curve .
shape bender Can not provide the correct ramp .

What was wrong with my model?

Group_48.skp

ok !

this scripts is great ! and I understand exactly the meaning of this performance.
Thanks for your help .It was Short and useful .

@cotty said:

I've done it with the original scale, I think the trick is the position of the face outside of the path...

thanks cotty . you right ...
I think the trick is the position of the face outside of the path

I use Recommended method in instructor . According to me trimble make changes in follow me instructor! As you can see, in instructor face is center of the path !

In any case, thank you for your help.

In my culture, said:
Everyone has something to teach you,You're his servant...

Thank you very much from your teaching .

thanks TIG

I've tested previously Change scale But in this case does not respond.
Currently backwards are not allergic and problem with follow me priority. Otherwise You're right, and must be Take care of our backwards .

You could model correct with this file ?

hi

I recently came into trouble with follow me tool .
in this file you see one profile and one path . I think everything is correct But the result is not good! where I was wrong? In your opinion, where I wrong?

follow me.skp

Great !!!
What a strange thing!
In this case, it works well ... No changes in the ramp modeling and geometry .
Thank you very much. You will have great help to me ...