''intersection des faces'' > avec le model
means in english ''intersection of edges''>''with the model''
I dont know what is error 183, it didn't make it again
2nd time it was ''not enough memory''

p.s. another thing for coming back to the first subject
for be sure there is no missunderstanding I made another capture for explain my issue as best



the ''big'' component exists in my library
but all other components I used for make it are registred to (1-5)
1.I would like to erase all smaller components from my library but I cannot
2.If I want to creat a 2nd ''big'' and past it to the 1st one I would like to make a ''fusion'' with the 1st one and not a new component because it will put a new component in my library,
I will certainly use it but I will never use the older ones again
so I feel it takes place in my system and make my PC slower..
perhaps that's the problem with my memory now (not enough memory) because I have to much unnecessary components that I would like to fusion
I hope this time my explanations is good

it gave me ''error 183'' and closed alone
I tryed again and this time ''not enough memory''

Yes I would like to combine the geometry of component 1 and component 2 into a component 3 and not having component 1 & 2 & 3 in my library, only component 3 for this example

but I dont know what to do after ''editing'' a component
there is an option, in french ''rendre unique''
just under ''creat a group''
can I use this one for make one and only one object ?

p.s. sorry but I dont remember about our talk concerning ''reversed faces''
if I understand well, ''reversed faces'' is when I copy a model and past it to the other one like a mirror ?
for example for making a bigger model I use same but smaller ones and I reverse them
but I don't see for the moment what could be the problem with that
pls can you reexplain me ?
sorry if I lost this important point
thanks

oh ok I see but I dont know how to do it
must I do it manualy ?

here I have 2 component
if I create a bigger component I will have in my component folder
-component 1
-component 2
-bigger component
it will make 3 new components
I dont need 3 component
I just would like to erase components 1 & 2 and keep only the ''bigger component''
but if I erase components 1 & 2 from the folder, even if I have the third ''bigger component''
this operation will affect ''bigger component''
perhaps my mistake is that :
every time I copy a component and make 2 from it and past them
I clic right and do ''make a component''
this will creat every time some new components
I would like to know how to make a big component from smaller ones without creating new ones but by gluing/past them to others
and how to erase unuseless components from the folder without affecting new/final component

ok I see
so, my next question is
-how can I regroup components based on the same big model ?

I would like to delete the ''in model'' components without touching to the components of the models
purge is not the good solution for me , I already tryed it
becuse purge deleted every other components like sketchup origin components like chair, bench, john , julie etc... but not the components I created

(szia)

windows>components>and the small house (home)

Hi,
I would like to delete some components in my folders but when I erase one for example it tell me ''warning all copy will be erased''
I click OK and not only the component in my folder disapear but the glued component used in my buildings to
how can I delete components from my folder without delete the active one glued to my buidings ??
thanks

vraiment interessant
mais pour le moment j'ai encore beaucoup à apprendre sur sketchup
mais surement pour une autre fois ,)
merci pour tes infos

j'ai acheté booltools, on va voir ce que ça donne

p.s. MoI à l'air pas mal du tout non plus !!

"Jean Lemire",
bonjour,
merci pour le tuyau c bon à savoir

ok je vois, c'est exactement ce qu'il me faut, l'option boélienne
mais en fait je travail dejs avec des composants , mais je les eclate lorsque je vx rajouter des éléments dedans ou en enlever certains
peut on obtenir une option boelienne sans passer par la version pro ?
sinon combien coute la version pro ?

salut à tous,
je profites pour poster un sujet en français vu que ce forum me semble bilingue, je tente donc le coup
j'aimerai mettre à nu la partie du reacteur, (seulement le four/cylindre blanc) encastré dans la partie arrière du vaisseau et l'enfoncer dans la copie de la partie arrière
le problème est que lorsque j'ai creusé ce dernier ça m'a démolit la partie arrière qui est devenue presque squeletique, plein de vide/trous, j'ai eu donc l'idée de sauvegarder la partie arrière en pensant que peut etre je pourrais (non y creuser un reacteur) mais y enfocer celui que je mettrai donc à nu, celui déja monté en esperant qu'il aie la priorité sans détruire pour autant l'élément arrière cette fois ci mais juste en s'y fondant gentiment comme dans du beurre, sans cuaser de dégat,
comment devrais-je m'y prendre ?
p.s. j'ai essayé en y reintroduisant une copie de la partie arrière mais automatique on en voit une partie dans le four du réacteur et si j'efface ces morceaux je me retrouve dans la meme situation, ça me grignote tout l ensemble à nouveau.
j'aimerai bien pouvoir effacer ce qui dépasse dans le four sans pour autant détruire l'extérieur du vaisseau (l'éxtérieur de la partie arrière donc)

thanks for your explanations TIG

you're totally right
making component is very practice
I created a component with my biggest building
it took time but now it's ok, all is very quick now
I explode the component when I want to cut a part of it , it's very practice
all goes quicker now
thanks a lot for your good idea

p.s. how to erase components from the component menu ??

p.s. about group ? what is it ? a certain number of components fusionned togheter ?

thanks for your video
I didn't use component in my actual work, only selected the buidling, -> CtrlC and CtrlV, after that I took the building with M and past it to the other one
do you think if I use component it will be more light ?
need I explode the item ?

sorry, I saw this forum existe in frenche to, I will remake my question in french it will be more easy for me to understand and walk on menus
my sketchup is in french so... and I have PC
anyway thanks for your help

Hi,
my pc is very slow since I use sketchup
more I build, more he load, if I copy some building 3 or 4 times he beggin to load a lot, the fan run very speed and make noise, sometimes sketchup crash
can it be in relation with the size of my buildings ?
does a smaller/resized building take less place than a big sized one ? (for example when I resize a building it take a lot of time to do it, around 5minutes)
I have an Intel DuoCore 3GHZ, it should be enough...
I am saving on (74go free) and my work is only 16mo..
p.s. I have disconnected the auto save



thanks!!

ok I see, this is the famous glue I learned last year
I forget all about what I learned last year, it's terrific lol
anyway during your reply I do it like this
I erased the circle and created a new one from the basis with the offset tool

done
now I would like to place it on the center of the circle but I dont know how to center it..