hi
I would like to know how to divide a circle in equal points ?
I would like to do this and I think I need to start be dividing one or 2 circles ?
thanks
hi
I would like to know how to divide a circle in equal points ?
I would like to do this and I think I need to start be dividing one or 2 circles ?
thanks
ok, thanks for all your complete explanations and infos
I will try all that and reask you question if I have some
see you later
thanks again ; )
gaieus
thanks for your explanations
I succeeded to make it but it was difficult
difficult to put axes in the right place
here is the result
I putted transparent view like this you can see difference between component and the old ones not glued but putted inside wall with classic method
booman
-I see now why you said it's difficult because set the axis right is not very easy
I think I had luck this time
I hope other time I can study it more
gaieus
-btw, I charged my own component
-perhaps I didnt understood but did you wanted that I charge yours ?
(radio button file) ?
p.s. I dont think I need to use 8 format, 6 is enough for what I need to do
but if one day I see that 6 is not enough I will change it to 8
so, thanks a lot for your help to both
I really appreciated it
I have only 2 questions left
pls can you do something for me for those two last ones ?
-how to fusion 2 pots togheter ?
-how to put all pots in the right straight line with a 'help point' for be 100% straight to the wall edges (100% parallele)
p.s. the other ones arent components (is it ok ? )
p.s. perhaps I will reply you tomorrow only if I sleep
ok I see
thanks for those additional tips booman
p.s. Gaieus, I uploaded the file we spoke about before
thanks a lot
it's a really good explanation
I will try it now
will give you news as soon as I succeeded it
köszi
ez eddig jol megy, de nem tudom hova kel clikkelni hogy pontosan a jo irànyban menyenek ezek a 6ok
booman, thanks
I will notify exactely step by step and retry
but, concerning copying, I knew it already
concerning rotating object it's ok to
but my prob is that I cannot succeed to glue it to the wall without using number control box
(down right corner the screen) mm per mm
so, more precisely I would like to know
-how to glue it directly without trying all kinds of rotations ?
-how to fusion 2 pots of B letter (pls see pic higher) ?
-how to put 6 pots on the straight line of the edge of the wall ?
köszi, nem is olyan bonyorult iràs de lasan irok, még gyorsan nem tudok
a szülömmel mindig magyarul beszélunk, igy könyü
na nem müködik ez a dolog
nem is baj ha meg tudod magyaràzni màs hogy
p.s. egy kicsit feljeb hagytam egy uj capturt
I cannot do it, I havent 'save as' option by clicking right
p.s. 3 éves voltam, 82 ben
ok I see what you wants to mean by ''share''
but I never do that before
I didnt know that we can share a component
how can I know which is the file name of my component ?
p.s. igen svaicban élek, Budapesten születtem, örulök hogy meg ismerketünk ; )
p.s. I succeded with luck to glue it (push it inside the wall to)
but now the 5 pots are not straight
-can you tell me how to select them and put them straight ? (A betü)
-can you tell me how to make a fusion of the 2 pots ? (B betü)
what would you mean by ''share'' ?
(share like share a folder ?)
sorry for my bad english
p.s. most làttom hogy magyar vagy, én Gàbor vagyok
Hi
I would like to stick this object perfeclty to the wall
but I m not sure to have rotate it perfectely
I would like to know how to be sure my small object is perfectly directed
(straight to the wall) like a button or a pot
p.s. I watched this tuto but it didn't explained me how to proceed for stick it perfectly without geometrical mistake
http://www.aidanchopra.com/web-content/chapter-5/grouping-things-together
http://www.aidanchopra.com/web-content/chapter-2/moving-and-copying-like-a-champ
p.s. naturally I used the 'Q' touch for rotation
'S' (scale tool) for change it size
'M' (move tool) for move
I know that in a simple case for sticking a rectangular object to another rectangular one I can just stick it to the corner of the other one by using green colour small square and leaving it directing me. but this issue is different because I didnt have angles for helping me
I think I still have moving issues, I m not sure to have completely understand the moving system..
I hope my explanations are enough good
thanks
pilou :
-what is ouliner ? do you wanna mean 'outliner' ?
jim :
-layer technique is not so difficult as I see
thanks for the tip
it looks good, I think I will use it
so, I checked this hiding
it's easy to hide as you say
I did
selection>right click>hide
but now my question is :
if I continue to work on buidlings I need (not hided ones)
-how can I reput in apparence the buidlings I hided before ?
in everytime
thanks
p.s. about layers
it looks like the layers option seems to be a little bit to complicate
I prefere photoshop layer system
so, I hope I will no need to use it on sketchup
because all buldings I made I will transfer it to PS for colour and overthere I can put each ones on layers
thanks for your advises
yes chopra tutorial is nice
here is which Im using
http://www.aidanchopra.com/web-content
thanks a lot
hello
I made a mistake and I erased a big part of the ground of my spaceship
now I would like to repare it but I dont know how to replace the ground
it's only a simple plate piece but as you can see on pics there is different angles
p.s. perhaps if I copy the ship and I put to the copy a mirror effect and I put one the top of the other?
but I dont know how to make mirror effect (I tryed with 'S' and right click but I have no option for this)
here is a pic before mistake
here is a pic after mistake
thanks for your help
hi everybody
first I would like to thanks all members who helped me for basis knowledge
I would like to show you my new spaceship that I started yesterday
it's not finished yet but I was impatient to show it to you
I m really happy about this programm
after making 3d I will transport it to photoshop for color it and add it to my comic
as everybody know I beginn to learn sketchup only a few days, so, that's my very first work