Help! You're my only hope...
-
It's now climbed to 6,062,---k Memory usage and flickering between 12-13% CPU usage.
Still hasn't finished opening...or it is locked up and I just don't want to admit it. -
On the semi-virgin machine (just loaded Thea and the trial for Skatter)...the same file that is still trying to load on my machine - loads in seconds and has only gotten up to 589,292k memory usage with 0% CPU currently (because it's not loading I would guess).
What oddness....anyone have any ideas what is going on?
-
Finally Opened! 1 hour later!
5,573,180K w/ 0% CPU...this sounds high in comparison. -
Then I hit Render for Thea Render and it Bugsplatted...
Not a good couple days in SketchUp land for me. -
Here are a couple shots of the model to show what I am working with...
-
I am not an expert, but this looks like data transfer problem, which means it is connected with HDD, RAM and maybe GPU memory. So, I would check difference between two systems. It would be best to post your hardware profiles here. This is a good tool for that http://www.hwinfo.com/
-
@srx said:
I am not an expert, but this looks like data transfer problem, which means it is connected with HDD, RAM and maybe GPU memory. So, I would check difference between two systems. It would be best to post your hardware profiles here. This is a good tool for that http://www.hwinfo.com/
Running it now.
-
I finally got it open again and purged then "Fix Problems" and got this...
-
Unsure what all would be useful, here is the short report...
Computer: DELL Precision WorkStation T5500
CPU: Intel Xeon E5520 (Nehalem-EP, D0)
2266 MHz (17.00x133.3) @ 2449 MHz (19.00x128.9)
CPU: Intel Xeon E5520 (Nehalem-EP, D0)
2266 MHz (17.00x133.3) @ 2490 MHz (19.00x131.1)
Motherboard: DELL 0D883F
Chipset: Intel 5520 (Tylersburg 36D) + ICH10R
Memory: 12286 MBytes @ 515 MHz, 7.0-7-7-20
Graphics: EVGA e-GeForce GTX Titan
NVIDIA GeForce GTX TITAN, 6144 MB GDDR5 SDRAM
Drive: Samsung SSD 850 EVO 250GB, 244.2 GB, Serial ATA 6Gb/s @ 3Gb/s
Drive: WDC WD800HLFS-75G6U1, 78.1 GB, Serial ATA 3Gb/s @ 1.5Gb/s
Drive: WDC WD15EADS-22P8B0, 1465.1 GB, Serial ATA 3Gb/s @ 1.5Gb/s
Drive: PLDS DVD+/-RW DH-16AAS, DVD+R DL
Drive: WDC WD20NMVW-11AV3S2, 1953.5 GB, Serial ATA 3Gb/s @ 3Gb/s <-> USB
Sound: Intel ICH10 - High Definition Audio Controller [A0]
Sound: NVIDIA GK110 - High Definition Audio Controller
Network: Broadcom BCM5761 NetXtreme Gigabit Ethernet PCIe
OS: Microsoft Windows 7 Professional (x64) Build 7601 -
And...it crashed again...damnit!
Will see if I can get an old version to work while trying to bring that one back up.
I had purged out all the unused Skatter setups and purged and fixed the file...still bugsplatted. -
Check my answer : http://getskatter.com/support/topic/deleting-a-skatter-setup/#post-782
-
@jiminy-billy-bob said:
Check my answer : http://getskatter.com/support/topic/deleting-a-skatter-setup/#post-782
Thanks! Was able to rule one plug-in out of the problem that I am having.
-
Wow!
1 The hardware is more than enough...
2 Will have to remove all the plugins, than add them one by one to find the cause..Just to remind you
-
The issue popped up again recently.
Found it to be a Skatter issue after all.
I could pull it up on a machine without Skatter plug in installed with ease...would hang forever on my machines that had Skatter installed.
Went in and purged/deleted the Skatter reference on the non-Skatter machine....saved then opened in my Skatter machine (no problem) - then redefined the Skatter perimeters...and works like a charm.Unsure what the hang up is and once redefined the problem hasn't occurred again.
Advertisement