Help! You're my only hope...
-
Finally Opened! 1 hour later!
5,573,180K w/ 0% CPU...this sounds high in comparison. -
Then I hit Render for Thea Render and it Bugsplatted...
Not a good couple days in SketchUp land for me. -
Here are a couple shots of the model to show what I am working with...
-
I am not an expert, but this looks like data transfer problem, which means it is connected with HDD, RAM and maybe GPU memory. So, I would check difference between two systems. It would be best to post your hardware profiles here. This is a good tool for that http://www.hwinfo.com/
-
@srx said:
I am not an expert, but this looks like data transfer problem, which means it is connected with HDD, RAM and maybe GPU memory. So, I would check difference between two systems. It would be best to post your hardware profiles here. This is a good tool for that http://www.hwinfo.com/
Running it now.
-
I finally got it open again and purged then "Fix Problems" and got this...
-
Unsure what all would be useful, here is the short report...
Computer: DELL Precision WorkStation T5500
CPU: Intel Xeon E5520 (Nehalem-EP, D0)
2266 MHz (17.00x133.3) @ 2449 MHz (19.00x128.9)
CPU: Intel Xeon E5520 (Nehalem-EP, D0)
2266 MHz (17.00x133.3) @ 2490 MHz (19.00x131.1)
Motherboard: DELL 0D883F
Chipset: Intel 5520 (Tylersburg 36D) + ICH10R
Memory: 12286 MBytes @ 515 MHz, 7.0-7-7-20
Graphics: EVGA e-GeForce GTX Titan
NVIDIA GeForce GTX TITAN, 6144 MB GDDR5 SDRAM
Drive: Samsung SSD 850 EVO 250GB, 244.2 GB, Serial ATA 6Gb/s @ 3Gb/s
Drive: WDC WD800HLFS-75G6U1, 78.1 GB, Serial ATA 3Gb/s @ 1.5Gb/s
Drive: WDC WD15EADS-22P8B0, 1465.1 GB, Serial ATA 3Gb/s @ 1.5Gb/s
Drive: PLDS DVD+/-RW DH-16AAS, DVD+R DL
Drive: WDC WD20NMVW-11AV3S2, 1953.5 GB, Serial ATA 3Gb/s @ 3Gb/s <-> USB
Sound: Intel ICH10 - High Definition Audio Controller [A0]
Sound: NVIDIA GK110 - High Definition Audio Controller
Network: Broadcom BCM5761 NetXtreme Gigabit Ethernet PCIe
OS: Microsoft Windows 7 Professional (x64) Build 7601 -
And...it crashed again...damnit!
Will see if I can get an old version to work while trying to bring that one back up.
I had purged out all the unused Skatter setups and purged and fixed the file...still bugsplatted. -
Check my answer : http://getskatter.com/support/topic/deleting-a-skatter-setup/#post-782
-
@jiminy-billy-bob said:
Check my answer : http://getskatter.com/support/topic/deleting-a-skatter-setup/#post-782
Thanks! Was able to rule one plug-in out of the problem that I am having.
-
Wow!
1 The hardware is more than enough...
2 Will have to remove all the plugins, than add them one by one to find the cause..Just to remind you
-
The issue popped up again recently.
Found it to be a Skatter issue after all.
I could pull it up on a machine without Skatter plug in installed with ease...would hang forever on my machines that had Skatter installed.
Went in and purged/deleted the Skatter reference on the non-Skatter machine....saved then opened in my Skatter machine (no problem) - then redefined the Skatter perimeters...and works like a charm.Unsure what the hang up is and once redefined the problem hasn't occurred again.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Advertisement