Power Toolbar (2.5) - fix for 2019

nickweboffer

hi
I have installed and uninstalled several times but the whole powerbar just doesn't show up in my SU 2015. what are my options?

juju

@nickweboffer said:

hi
I have installed and uninstalled several times but the whole powerbar just doesn't show up in my SU 2015. what are my options?

did you remember to go to View > Toolbars and check that the toolbar is selected?

Pherim

Hello,

I have a small issue with one of the functions and I wonder if anything can be done about it. It's about the "Equalise Curves" tool, which is very handy in certain situations, but whenever I use it, one end of the curve moves a little. I am only using "Divide by number", not by length, but it happens in both modes. Is it possible to change it so that both ends stay in their original position? Or is there another plugin which can do that? Unlike other tools in this collection, I can't find a corresponding separate plugin for this function. And for example Fredo6's Curvizard can only simplify contours by angle, but not equalise the segments.

CadFather

Hi Pherim, i'll have a look at it, though that might be a while as i'm away

Pherim

Thank you! Also, sometimes it does not redraw the curve, but it just disappears.

Then I get this error in the Ruby Console:

Error; #<ArgumentError; Not enough points - at least 2 required>
C;/Users/.../AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar.rb;3841;in `add_curve'
C;/Users/.../AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar.rb;3841;in `main'
C;/Users/.../AppData/Roaming/SketchUp/SketchUp 2016/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb;578;in `block in <module;Max_Coppoletta>'
SketchUp;1;in `call'

vzynsky

JHS powerbar 2.4 + su17! What was the problem?

GoodWin_2203

thanks for the wonderful plugin! very useful. I have a problem with the "extrude lines" tool. it does not work correctly. when I specify the height to which you want to squeeze a curved line, it does not squeeze it out, but simply moves it with copying. Do you know why this is so?

majid

Silly question: Does it work with the latest SU?

young77

Hi…
I have a question about extrude line in JHS Power Bar plugin. I have tried to create a line and select the line, then click on extrude line in that plugin, but it didn’t extruded as seen in youtube tutorial, it was only an offset from first to second point with the same line, there is no any extrusion at all. Please advise me how to correct my steps thanks.

please refers to my link : https://ufile.io/fk7et

valerostudio

Will we get support for 2019? It doesnt seem to be installing correctly.

stefanozilio

Hi,
Only for Info, I used your bar a lot
Do you have the intension to update it for SU2019?

Thanks
SZ

CadFather

Yes, hope to work on an update sometime soon, time is a bit short but I will.

also if problems, please try to be as specific as possible.

CadFather

ok, try this - a quick fix so it loads. first test seems fine. so let me know if you encounter issues..

later i'll have a proper look at the script and update it properly - thanks

Powerbar Fix for 2019.rbz

atelierpaar

Hello,
I hope this chat also relates to jhs powerbar.
After intalling SU 2019 I get the following errorcode :

Fehler beim Laden der Datei C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb
Error: #<SyntaxError: C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar.rb:7367: Invalid return in class/module body
return nil
^~~~~~>
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:10:in load' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:10:in module:JHS_powerbar'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:7:in <module:Max_Coppoletta>' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:6:in <top (required)>'
C:/Program Files/SketchUp/SketchUp 2019/Tools/extensions.rb:197:in require' C:/Program Files/SketchUp/SketchUp 2019/Tools/extensions.rb:197:in load'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:16:in register_extension' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:16:in module:JHS_powerbar'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:8:in <module:Max_Coppoletta>' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:7:in <top (required)>'

unfortuantely I have no clou how to fix this.
Any suggestions ?
thanks
Uli

juju

@atelierpaar said:

Hello,
I hope this chat also relates to jhs powerbar.
After intalling SU 2019 I get the following errorcode :

Fehler beim Laden der Datei C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb
Error: #<SyntaxError: C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar.rb:7367: Invalid return in class/module body
return nil
^~~~~~>
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:10:in load' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:10:in module:JHS_powerbar'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:7:in <module:Max_Coppoletta>' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/jhs/_jhs_powerbar/jhs_powerbar_menux.rb:6:in <top (required)>'
C:/Program Files/SketchUp/SketchUp 2019/Tools/extensions.rb:197:in require' C:/Program Files/SketchUp/SketchUp 2019/Tools/extensions.rb:197:in load'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:16:in register_extension' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:16:in module:JHS_powerbar'
C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:8:in <module:Max_Coppoletta>' C:/Users/Architekt/AppData/Roaming/SketchUp/SketchUp 2019/SketchUp/Plugins/_jhs01_powerbar.rb:7:in <top (required)>'

unfortuantely I have no clou how to fix this.
Any suggestions ?
thanks
Uli

Uli, is this with the file provided in the post directly above yours? (see below for quote).

@cadfather said:

ok, try this - a quick fix so it loads. first test seems fine. so let me know if you encounter issues..

later i'll have a proper look at the script and update it properly - thanks

[attachment=0:26dzmfax]Powerbar Fix for 2019.rbz[/attachment:26dzmfax]

CadFather

yes Uli, as Juju said - make sure you have the latest update - i have no errors on my machine

stefanozilio

Thanks, the bar is going to work in 2019

valerostudio

@cadfather said:

yes Uli, as Juju said - make sure you have the latest update - i have no errors on my machine

Not sure what it could be. I have uninstalled all previous versions, reinstalled the update, it shows up in the Extension Manager as enabled, but no toolbar and the CADFATHER PACK doesn't show up in the Help menu either.

CadFather

that's weird - at least if you got an error message - and i take it the location allows full access (not sure on mac)

atelierpaar

thanks to you all
after a fresh download everything is nice an shiny again
Uli