[Plugin][$] TopoShaper - v2.7a - 01 Apr 24
-
where can i repor tan issue with the plugin toposhaper, please?
thank you -
@duventdesvagues said:
where can i repor tan issue with the plugin toposhaper
Post it here. Please also correct your profile. It says you are using SketchUp 2022 Free/Make but there is no such version. That information is important as it helps us help you.
-
Hey, i'm new to creating terrain in Sketchup, but following instructions using Fredotools and Toposhaper went relatively well, until the second step in Toposhaper: creating the mesh from isocontours. Toposhaper generates an error and the operation is fully aborted.
I am using Toposhaper v2.6a in Sketchup Pro 2021 in Windows 10 Pro 64bitDate: 06-Jul-22 09:36:34
An error occurred in CLEANSING
The operation is fully abortedcannot hide layer that is a part of the active path
body_lib6tool.rbe: 2538 -- visible=
body_lib6tool.rbe: 2538 -- block in switch_to_temp_layer
body_lib6tool.rbe: 2537 -- each
body_lib6tool.rbe: 2537 -- switch_to_temp_layer
toposhapertool.rbe: 1391 -- change_view
toposhapertool.rbe: 1358 -- set_preview_working
toposhapertool.rbe: 544 -- cleansing_processing
toposhapertool.rbe: 523 -- after_selection
toposhapertool.rbe: 493 -- notify_edge_picked
body_lib6edgepicker.rbe: 539 -- call
body_lib6edgepicker.rbe: 539 -- notify_action
body_lib6edgepicker.rbe: 595 -- terminate_current_selection
toposhapertool.rbe: 658 -- execute_validate
toposhapertool.rbe: 387 -- handle_initial_selection
toposhapertool.rbe: 319 -- activate
toposhapertool.rbe: 133 -- select_tool
toposhapertool.rbe: 133 -- action__mapping
lib6plugin.rbe: 142 -- call
lib6plugin.rbe: 142 -- launch_action
lib6plugin.rbe: 244 -- launch_action
bootstrap_toposhaper.rbe: 83 -- launch_action
bootstrap_toposhaper.rbe: 149 -- block in startup
lib6plugin.rbe: 1461 -- command_invoke
lib6plugin.rbe: 1441 -- block (2 levels) in build_config_commands
lib6traductor.rbe: 1378 -- block in add_commandI would be happy to see a solution to this!
-
I think the problem is that you are inside the group of contours, and the group has itself a layer assigned.
In TopoShaper, you can select the group of isocontours and process it, rather than entering the group.
-
Hi, I can't use toposhaper anymore because of trial period has expired, where i can find the free license..,
-
-
Trying to use Toposhaper but none of the dialog boxes open when attempting to generate from contours. Goes through "cleansing contours" progress bar and then a large yellow square appears. Is this due to using the trial version?
-
@makover said:
Is this due to using the trial version?
Probably not. Might be an outdated LibFredo6 install, might be incorrect model setup. Share the .skp file so we can see what you are working with.
-
Hello Fredo Master! I have the same issue as somebody before:
An error occurred in CLEANSING
The operation is fully aborted
cannot hide layer that is a part of the active pathI'm running SU2021 on my Windows OS 11
Helpp!!
-
@andres8659 said:
An error occurred in CLEANSING
The operation is fully aborted
cannot hide layer that is a part of the active pathIt looks like you selected the curves directly and they have some assigned layer.
Can you try by selecting the group enclosing the curves (or create this group). -
-
You've got several groups nested with the loose geometry of the countours in the model. Explode the group representing the perimeter of the contours and cut the other stuff down at the bottom of the group out so the group only contains the geometry for your terrain. There's a lot of edges to deal with in the contours so be patient when you run TopoShaper. Might not hurt to simplify the contours first.
-
Hello,
I am now using Sketchup Pro 2021, with TopoShaper v2.6a. Following the instructions to TopoShaper::IsoContours, when I try to generate terrain as Step 4, SketchUp crashed! No matter the grid set as default 50x48, or 200x198, crashed all the same!
I don't know why, and could anyone tell me if there is anything wrong?
My file Topo.skp is here (uploaded to Microsoft OneDrive for download):
https://1drv.ms/u/s!AvaTfkcj2ZSTijSdm9cz1fsnQNFr?e=gUdSXsPlease help and many thanks!
-
Try tidying up the border to help Toposhaper create a mesh...
I removed your outline and some pointless small edges and the BugSplat stops.
I also moved your raw geometry onto the default layer rather than your major/minor layers
-
Hello Rich O Brien,
Many thanks for your help.
The Topo-sk8.skp works well with toposhaper v2.6a in SketchUp 2021 (Win10).I have tried some other skp files and find that if the geometry is rectangle, no errors will occur.
So I guess that there might be 2 situations for toposhaper smoothly running without errors:
- the geometry is better in rectangle --- at least not too much acute or obtuse angles;
- Not too much tiny contour lines near the edge of the geometry.
Is that true?
Many thanks again!
@rich o brien said:
Try tidying up the border to help Toposhaper create a mesh...
[attachment=0:3akutcq8]<!-- ia0 -->Topo-sk8.skp<!-- ia0 -->[/attachment:3akutcq8]
I removed your outline and some pointless small edges and the BugSplat stops.
I also moved your raw geometry onto the default layer rather than your major/minor layers
-
@titusbiao said:
So I guess that there might be 2 situations for toposhaper smoothly running without errors:
- the geometry is better in rectangle --- at least not too much acute or obtuse angles;
- Not too much tiny contour lines near the edge of the geometry.
Is that true?
Correct. You do not need too many contours, or too detailed contours, because TopoShaper is interpolating.
When the terrain has an irregular contour, you may also get artefacts, because TopoShaper is based on quads.
-
Hi !
I have a problem with TopoShaper
Buttons don't appear and if the terrain geometry is not at the top level, it crashes.
I've had this problem before with other files.
Lib Fredo6 13.4a
Toposhaper 2.6aThank's !
-
Works fine for me...
-
@volpino170790 said:
I have a problem with TopoShaper
Buttons don't appear and if the terrain geometry is not at the top level, it crashes.
I've had this problem before with other files.
It works for me too.
Could you open the Ruby Console before launching TopoShaper to see if there are error messages displayed.
-
Hi !
Here a link for a video
https://e1.pcloud.link/publink/show?code=XZ44gQZpMbvTD07lPfKUOGY0zFTHRPYK5Ey
Advertisement