[Plugin][$] TopoShaper - v2.7a - 01 Apr 24

Rich O Brien · 3 Sept 2022, 11:55

@tofix1991 said:

where i can find the free license..,

It's next to the free beer

makover · 7 Oct 2022, 00:28

Trying to use Toposhaper but none of the dialog boxes open when attempting to generate from contours. Goes through "cleansing contours" progress bar and then a large yellow square appears. Is this due to using the trial version?

Dave R · 7 Oct 2022, 00:35

@makover said:

Is this due to using the trial version?

Probably not. Might be an outdated LibFredo6 install, might be incorrect model setup. Share the .skp file so we can see what you are working with.

Andres8659 · 7 Oct 2022, 17:02

Hello Fredo Master! I have the same issue as somebody before:

An error occurred in CLEANSING
The operation is fully aborted
cannot hide layer that is a part of the active path

I'm running SU2021 on my Windows OS 11

Helpp!!

fredo6 · 7 Oct 2022, 18:06

@andres8659 said:

An error occurred in CLEANSING
The operation is fully aborted
cannot hide layer that is a part of the active path

It looks like you selected the curves directly and they have some assigned layer.
Can you try by selecting the group enclosing the curves (or create this group).

makover · 13 Oct 2022, 11:44

@dave r said:

@makover said:

Is this due to using the trial version?

Probably not. Might be an outdated LibFredo6 install, might be incorrect model setup. Share the .skp file so we can see what you are working with.

Thanks! Attaching the modelled contours

00.10_NW_DWG Contours.skp

Dave R · 13 Oct 2022, 12:32

You've got several groups nested with the loose geometry of the countours in the model. Explode the group representing the perimeter of the contours and cut the other stuff down at the bottom of the group out so the group only contains the geometry for your terrain. There's a lot of edges to deal with in the contours so be patient when you run TopoShaper. Might not hurt to simplify the contours first.

titusbiao · 28 Oct 2022, 09:12

Hello,

I am now using Sketchup Pro 2021, with TopoShaper v2.6a. Following the instructions to TopoShaper::IsoContours, when I try to generate terrain as Step 4, SketchUp crashed! No matter the grid set as default 50x48, or 200x198, crashed all the same!

I don't know why, and could anyone tell me if there is anything wrong?

My file Topo.skp is here (uploaded to Microsoft OneDrive for download):
https://1drv.ms/u/s!AvaTfkcj2ZSTijSdm9cz1fsnQNFr?e=gUdSXs

Please help and many thanks!

Rich O Brien · 28 Oct 2022, 10:29

Try tidying up the border to help Toposhaper create a mesh...

Topo-sk8.skp

I removed your outline and some pointless small edges and the BugSplat stops.

I also moved your raw geometry onto the default layer rather than your major/minor layers

titusbiao · 31 Oct 2022, 09:08

Hello Rich O Brien,

Many thanks for your help.
The Topo-sk8.skp works well with toposhaper v2.6a in SketchUp 2021 (Win10).

I have tried some other skp files and find that if the geometry is rectangle, no errors will occur.

So I guess that there might be 2 situations for toposhaper smoothly running without errors:

the geometry is better in rectangle --- at least not too much acute or obtuse angles;
Not too much tiny contour lines near the edge of the geometry.
Is that true?

Many thanks again!

@rich o brien said:

Try tidying up the border to help Toposhaper create a mesh...

[attachment=0:3akutcq8]Topo-sk8.skp[/attachment:3akutcq8]

I removed your outline and some pointless small edges and the BugSplat stops.

I also moved your raw geometry onto the default layer rather than your major/minor layers

fredo6 · 31 Oct 2022, 10:14

@titusbiao said:

So I guess that there might be 2 situations for toposhaper smoothly running without errors:

the geometry is better in rectangle --- at least not too much acute or obtuse angles;

Not too much tiny contour lines near the edge of the geometry.
Is that true?

Correct. You do not need too many contours, or too detailed contours, because TopoShaper is interpolating.

When the terrain has an irregular contour, you may also get artefacts, because TopoShaper is based on quads.

volpino170790 · 10 Nov 2022, 10:53

Hi !

I have a problem with TopoShaper

Buttons don't appear and if the terrain geometry is not at the top level, it crashes.

I've had this problem before with other files.

Lib Fredo6 13.4a
Toposhaper 2.6a

I send a picture and a file

Thank's !

2.1878.skp

Rich O Brien · 10 Nov 2022, 11:44

Works fine for me...

fredo6 · 10 Nov 2022, 11:48

@volpino170790 said:

I have a problem with TopoShaper

Buttons don't appear and if the terrain geometry is not at the top level, it crashes.

I've had this problem before with other files.

It works for me too.

Could you open the Ruby Console before launching TopoShaper to see if there are error messages displayed.

volpino170790 · 10 Nov 2022, 12:32

Hi !

Here a link for a video
https://e1.pcloud.link/publink/show?code=XZ44gQZpMbvTD07lPfKUOGY0zFTHRPYK5Ey

Error in console

volpino170790 · 10 Nov 2022, 13:00

Hi!

I all uninstall my extensions (just not uninstall 3dxSketchUp and the Sketchup extensions from sketchup) and reinstall this:

LibFredo6, then close and reopen the file
Toposhaper, then close and reopen the file
Scf licence manager, then close and reopen the file

It is solved, but no idea why

I think there is a conflict between Fredo 6 and an other extension but which one... THAT the question

A video belove:

Share Anything with pCloud

With pCloud's unique Download Link feature you can share files with everyone. Click to download. Join pCloud.com and get up to 20GB FREE cloud storage.

pCloud (e1.pcloud.link)

volpino170790 · 10 Nov 2022, 14:32

Hi!

I think I've find the extension it cause a Bug

CleanUp3 3.4.3

I install juste TT lib, I test to make a terrain, no problem
I installCleanUp3 3.4.3, I test to make a terrain, problem with toposhaper
I uninstallCleanUp 3 3.4.3, I test to make a terrain, problem with toposhaper
I uninstallTT lib, I test to make a terrain, problem with toposhaper
I uninstallToposhaper and reinstall it, I test to make a terrain and it work great.

--> TT lib and CleanUp3 can cause issues

Before install TTLib and Cleanup3

After install, but before close and reload the file

After reopen the file and test a terrain

This time it's ok, but 5 minutes ago it didn't work... No idea
And I've make the same install

-.-.-.-.-.-.-.-.-

I install Fredo6 Push Pull:

and I close the file and reopen it:

and I test terrain Toposhaper:

fredo6 · 10 Nov 2022, 16:22

@volpino170790

Could you install LibFredo6 v13.5a to see if this improves the situation.

volpino170790 · 10 Nov 2022, 16:45

Hi!

It seems to be the LibFredo6 because (apart from basic SketchUp extensions) I only installed Fredo6 extensions and the bug occurs.

However, sometimes it resolves itself and the Toposhaper toolbar appears.
I haven't been able to find a routine that produces the bug for sure.

After installing Curviloft (same message as after installing FredoTools)

-.-.-.-.-.-.-

Since installing version 13.5a, the bug no longer seems to occur but
there are always error messages for installations of extensions requiring a Fredo6 license.

After install of FredoSpline:

Thanks a lot for your speed react

shirokostup · 27 Apr 2023, 05:51

hi. I'm in Russia now, PayPal is blocked here. I need a TopoShaper. How can I pay?