[Plugin][$] Curvizard - v2.5a - 01 Apr 24
-
-
very nice plugin. It's really useful, thank you so much
-
NEW RELEASE: Curvizard v1.4a - 15 Sep 13
Curvizard 1.4a is a release with the following updates
- New naming conventions
- Fixes a major bug in the Edge Prop tool (which was not working)
- Include an alternate icon toolbar by CadFather
Curvizard 1.4 requires an upgrade to LibFredo6 5.2 or higher.
See main post of this thread for Download.
Fredo
-
@dedmin said:
I am not sure I see the problem.
But in any case, Simplify is not the opposite of Smooth.Furthermore, Smooth can be used to simplify a curve by incresing the angle, whereas Simplify just remove vertices based on a minimum angle
Fredo
-
@dedmin said:
[attachment=0:wmnznkk8]<!-- ia0 -->2013-08-25_055853.jpg<!-- ia0 -->[/attachment:wmnznkk8]
Date; 25-Aug-13 05;57;22 > An error occured in Curvizard#edge_prop > The operation is aborted > >The bug in Edge Prop tool should be fixed in Curvizard 1.4a.
Fredo
-
Thank you updates, always so timely!
-
Excellent and invaluable tools!!!
No problems so far!
Thanks!! -
Thank you Fredo from all that use your tools!!!
-
Date; 16-Sep-13 19;59;36 An error occured in Curvizard#cleanup_curve The operation is aborted undefined method `[]' for nil;NilClass Lib6G6.rb; 1249 -- vertices_from_edges_in_sequence Lib6Contour.rb; 468 -- contour_reshaping encoding.rb; 48 -- each_with_index Lib6Contour.rb; 437 -- each Lib6Contour.rb; 437 -- each_with_index Lib6Contour.rb; 437 -- contour_reshaping CurvizardAlgo.rb; 523 -- execute_geometry CurvizardTool.rb; 1595 -- geometry_generate CurvizardTool.rb; 1495 -- top_execute CurvizardTool.rb; 290 -- handle_initial_selection CurvizardTool.rb; 267 -- activate CurvizardTool.rb; 46 -- select_tool CurvizardTool.rb; 46 -- launch_tool CurvizardTool.rb; 41 -- action__mapping Lib6Plugin.rb; 134 -- call Lib6Plugin.rb; 134 -- launch_action bootstrap_Curvizard.rb; 51 -- launch_action bootstrap_Curvizard.rb; 83 -- declare_command Lib6Plugin.rb; 1111 -- call Lib6Plugin.rb; 1111 -- build_config_handlers FredoTools__ThruPaint.rb; 2315 -- call -
dedmin,
Would you mind to post or PM me the model.
This looks like a bug linked to the geometry.
Thanks
Fredo
-
NEW RELEASE: Curvizard v1.5a - 27 Nov 13
Curvizard 1.5a is a release for future Sketchup compatibility. It is advised to upgrade even if there are no functional changes.
See main post of this thread for Download.
Fredo
-
some bug in ver 1.5a ..crash skp9 when I use Curvizard inside the component.
-
What is skp9?
You have to give some useful details if you want help. Post the SketchUp model and describe exactly what you were trying to accomplish.
I just tried it and it works for me without crashing.
-
again crash! :kurwaa: when I want connect lines by Curvizard - v1.5a
-
@sicksickisck said:
again crash! :kurwaa: when I want connect lines by Curvizard - v1.5a
That's as useless as your previous post as far as getting any help.
-
Nice interface improvement, Fredo! Thank you so much.
-
hey Fredo,
I'm experiencing the problem of curves exploding upon welding another curve on the same object.. the attached .skp should allow you to see this in a repeatable manner (at least, the model shows the problem on both of my computers)
with nothing pre-selected, use the function 'Make Curves (weld)' with the following settings:
..click on one of the 3 border curves of the object.
-exit tool.. the curve has been welded.
-run the function again but use it on another edge.
-exit tool.. this new edge is now a curve but the other one has now exploded.
the .skp is saved as a v8 file but i'm using the plugin in a newer version of sketchup.. the Curvizard version i'm using is 1.5a with LibFredo 5.5g
thanks
-
Jeff,
There seems to be several problems in this model
- Curvizard (nor Curviloft) cannot select some of the edges in the bottom right corner
- yes, curves are unwelded when you make a new one.
I'll have a closer look and advise.
Do you notice that on other models?
Fredo
-
@fredo6 said:
Jeff,
There seems to be several problems in this model
- Curvizard (nor Curviloft) cannot select some of the edges in the bottom right corner
- yes, curves are unwelded when you make a new one.
I'll have a closer look and advise.
Do you notice that on other models?
Fredo
thanks for looking into it.
yes, i notice it on other models sometimes but it was this particular part of a drawing in which the behavior was very noticeable/repeatable..
fwiw, the side profile edge came from a .3ds import via rhino and the surface was then made/revolved via TIG's lathe tool.. i'm not sure if that has anything to do with it.. i also mapped the surface with thruPaint but deleted the texture prior to uploading.. so the surface may still have some custom UV applied?
[EDIT] i just tried drawing a similar model in sketchup only.. i still used TIGs lathe to revolve the surface but no texturing or imported curves were used.. same problem.
-
Jeff,
I identified and fixed all problems. This will go in a next release. Thanks for signaling (you were the first one).
Fredo
Advertisement