$500 for inference engine plugin
-
Hi folks.
With SU, it is not the inferences that are proposed that are the problem, its more the quantity of those that can be a nuisance sometimes when trying to get a snap from a specific item in a very detailed sector of a model.
Although there are tricks and workaround to minimize the number of snaps proposed by the inference engine, as I pointed out in my previous post, I also feel that sometimes I loose a bit in efficiency because of these.
A few years back, well ... many years ago, after using SU for a couple of years, I proposed, on the now defunct @last Software forum, to add a system of inference filter, like the one that I was using in PowerDraw on my Mac in 1990. PowerDraw later became PowerCadd. I don't use it anymore since SU fills my needs very well but the system was quite simple and efficient.
The idea was to tell the program what kind of inference you want. This was acomplished by pressing some keyborad keys. The list was:
c --> for circle centers and possibly line center (midpointin SU, if my memory serves me well).
x --> for intersections
l --> for line (on edge in SU)etc.
There were only a limited number of these. For example, there was one for a vertex (endpointin SU) or for which I don't remember the key.
Using such a key would limit the snaps to a specific type of item. Press x, for example, will yield snaps only from intersections. Press nothing and the engine works as usual, snapping to everything.
The only problem would be to let SU knows that you are not using a shortcut but are wanting to filter the inferences. Maybe some modifier key or a trigger key or even a serie of icons in the status bar would do the job. Pressing ESC would get you out of this filtering system, or pressing the icon again. Of course, the Status Bar should show the status of this filtering system. Maybe pressing a few icons would allow you to snaps to endpoints and midpoints, for example, or any combination you want. One icon could turn all filters off in one click.
Just ideas.
-
Jean,
There are two different things discussed here. One is the snapping to geometry (which you describe in your post) and the other is inferencing (which hellnbak describes in another post about trying to draw a line slightly off-axis)
My thoughts:- turning on/off and filtering snapping would be great.
- having a way (like Microstation or solidworks, etc) to draw in a plane without x-y inferencing. No inferencing at all would mean no control in the z direction... basically lost in 3D space.
-
+1 for a simple snap toggle like in acad
and i still don't get it why this is so hard to implement...
but for me the even more important and useful "feature" (lol interesting view... function deactivation as a feature) would be the ability to disable the axes snap (ortho) only! -
@numerobis said:
and i still don't get it why this is so hard to implement...
My impression is not that it's difficult for Google to implement - it's more that they want to keep the UI simple...
-
What I would like to see would be a new pane to the Preferences dialog, with checkboxes for the various inferencing/snapping options. The first I would like to toggle would be the various "From outside active..." options. Of course, to be able to assign shortcuts to the options would be cool too.
Anssi
-
I'm willing to pay $500 for my dream plugin -- how much are you guys willing to ante up for yours?
-
@hellnbak said:
like those instances when you are trying to draw a line, and it's just slightly off axis, and it won't ..
Maybe you should try using Tools_on_surface's freehand tool..
http://forums.sketchucation.com/viewtopic.php?t=11212
and be sure to send Fredo the 500 spot
-
yes, tools on surface is great, but doesn't address the snapping issue, nor trying to draw a line in space. I was thinking construction plane would be helpful, but again you run into inferencing for something just off-axis.
@hellnbak: One thing I was thinking was - couldn't you just change your axis temporarily to align, or is this a whole series of non-orthogonal lines?
-
-
@thomthom said:
@andybot said:
I was thinking construction plane would be helpful
Work Plane v2.3 by TIG?
right! sorry, was just going off the top of my head... guess where that was...
-
TGI3D has a Move tool that ignores inferencing. You can also lock the movement perpendicular to your view then orbit to another view and it will remain locked to the locked view.
It only works on verts though. Adding groups and components to that would be nice.
-
I was thinking of maybe making the Gizmo I'm working on for Bezier Surface and Vertex Tools into a standalone plugin. One could then define custom axis for the gizmo - pick from model entities (lines, planes etc) So for basic operations like move, rotate and scale it'd be something that would work without inference.
-
I like the thought of a gizmo.
-
I can't imagine working in AutoCAD LT without Osnaps. The F3 key turns snapping on or off universally and the Osnaps panel lets you choose the particular snaps that are 'on'. My work flow all day long is a continual dialogue with the software as to what I want to snap to: INT (intersection) / MID (midpoint) / NEA (nearest), QUA (quadrant), etc.
It's one of the reasons why AutoCAD LT is my main application with SketchUp used for 3D work.
-
@andybot said:
yes, tools on surface is great, but doesn't address the snapping issue, nor trying to draw a line in space. I was thinking construction plane would be helpful, but again you run into inferencing for something just off-axis.
FreeHand is a polyline tool where you can enable or disable inference and snapping. It works without a surface too. It has a pick & click mode and a freehand mode.
The only thing is that whenever it encounters a surface it follows it.
But I can make a special version that behaves more like the line tool if this is useful.Fredo
-
Wow! What a blessed day in sketchucation world!! (sarcastic aside to solo, cornel, et al...
)If you can make a line tool like that in your Fredo world of plugins, I just may call this program FredoUp... Your tools are so amazingly good and useful. I can't imagine my workflow in sketchup without them. Many thanks to you! Not to mention someone may be shelling out $500. I may wish to add to that amount...
-
NEWSFLASH....NEWSFLASH....NEWSFLASH
This just in...according to informed sources, famed SU modeler Hellnbak has formally announced his intention to declare bankruptcy. More details as they become available.
-
moral of the story: a new plugin for (fill in the blank) is always closer than you thought...
-
Can I have NURBS?
-
@hellnbak said:
...according to informed sources, famed SU modeler Hellnbak has formally announced his intention to declare bankruptcy. More details as they become available.
now that some ruby jedi masters came along, the famed modeler announced his bankruptcy
Advertisement