[Plugin] Extrude Edges by Rails
-
Maybe Chris Fullmer will allow you to put "Bender" on the same toolbar. It would be a good fit.
J
-
Hi TIG and all, today I spent some quality time trying to achieve the result of this procedure with Extrude Edges by Rails plugin: http://www.youtube.com/watch?v=SUYN_Uqzvec.
Any idea if and how is possible to produce this kind of result?
Thanks in advance for the plugin and any help. -
@tig said:
I'm currently looking at updating several of my extrusion tools and putting them onto a toolbar and giving them web-dialogs were appropriate... so be patient
wow, sounds exciting. I will be as patient as I can manage
(@Gaieus**: see, with a Wave I would have been able to place this comment inline, where it belongs, instead of having to quote to make clear which post I am referring to...)**
-
@carrozza said:
Hi TIG and all, today I spent some quality time trying to achieve the result of this procedure with Extrude Edges by Rails plugin: http://www.youtube.com/watch?v=SUYN_Uqzvec.
Any idea if and how is possible to produce this kind of result?
Thanks in advance for the plugin and any help.As you found vanillas FollowMe isn't going to make a Fillet that touches the Leg and Arm properly...
Here is away of doing it with careful pre-planning, Groups, Copy/Paste-in-Place, Intersect and EEbyRails etc - however the Fillet that's made is very poly-intensive... BUT it is accurate to suit the facets of the cylinders... depends what you want - for detailed work OK but for massing just leave out the fillets as you'll barely see them!
EEbtRailsFilletWeldForm.skp -
Hi TIG, thanks for your help. There's a problem with the fillet created this way, though: it doesn't revolve correctly around the "arm". See picture, taken from your kind example: on one side the arc points inward, on the other side points outward.
-
With the plug "Round Corner" by Fredo, you can do the welding seam.
-
@carrozza said:
Hi TIG, thanks for your help. There's a problem with the fillet created this way, though: it doesn't revolve correctly around the "arm". See picture, taken from your kind example: on one side the arc points inward, on the other side points outward.
You are right !
If you make it in 90 degree bits it's better...
BUT it should be like that - I'll look at the cause...
Perhaps the Fredo Rounded Option is the best ... see below ...
Blajnov - exactly did you do that I can't reproduce it ???
-
@tig said:
exactly did you do that I can't reproduce it ???
Top segment of horizontal pipe has to line up with a segment on the vertical pipe...look closely at his hidden geometry
-
Mamma mia, this is a great learning experience!
Thank you very much Blajinov and TIG for your help, is much appreciated!
-
@tig said:
Blajnov - exactly did you do that I can't reproduce it ???
I enclose a file with scenes of action
-
I see now...
So to recap: DON'T use EEbyRails for making Fillets between Rounded Legs and Arms etc - instead USE Fredo's 'Round Corners' - it's quicker and produces better results !
Blajnov - it might be best if you edit / retitled your SKP without reference to EEbyR, to avoid confusion -
Here's a way to make a Multi-Railed Mesh with EEbyRails by making sub-meshes and combining them...
EEbyRailsMultiRailSteps.skp -
Awesome plugin! Thanks!
-
I don't understand you diagram.
You can already do this ?
Are you wanting some sort of 2-face FollowMe ? Just use the faces edges [welded into a curve] as your Rails ?
With EEbyRv2 [that is about to be launched] you will be able to choose the Profile, Rail1 and Rail2 and then a 'Melding-Profile' that fixes the end form too - is that what you want ? It will allow a definite start and end profile location form to be predefined...
-
Hi,TIG,I have a idea that <extrude edges by rails> adds a path like this,thanks
next:I wish it could be add rotate and scale function
-
@tig said:
I don't understand you diagram.
You can already do this ?
Are you wanting some sort of 2-face FollowMe ? Just use the faces edges [welded into a curve] as your Rails ?
With EEbyRv2 [that is about to be launched] you will be able to choose the Profile, Rail1 and Rail2 and then a 'Melding-Profile' that fixes the end form too - is that what you want ? It will allow a definite start and end profile location form to be predefined...
Yes,it could be "2-face +2-path+FollowMe"
I also do not have this plug-in, I use the LATHE. RB command generates images shown, as you said, the first path to the same, choose the second Rails as a control Rails
"lathe" you can see it http://www.sketchupbbs.com/thread-40382-1-1.html -
Hi,
-
@hsjzyangbin said:
@tig said:
I don't understand you diagram.
You can already do this ?
Are you wanting some sort of 2-face FollowMe ? Just use the faces edges [welded into a curve] as your Rails ?
With EEbyRv2 [that is about to be launched] you will be able to choose the Profile, Rail1 and Rail2 and then a 'Melding-Profile' that fixes the end form too - is that what you want ? It will allow a definite start and end profile location form to be predefined...
Yes,it could be "2-face +2-path+FollowMe"
I also do not have this plug-in, I use the LATHE. RB command generates images shown, as you said, the first path to the same, choose the second Rails as a control Rails
"lathe" you can see it http://www.sketchupbbs.com/thread-40382-1-1.htmlI too have a
lathe.rbthat is somewhat similar... -
@tig said:
I too have a
lathe.rbthat is somewhat similar...ๅธๆๆ็ๆ่ฎฎๅฏนไฝ ็ๆไปถๆ็จ๏ผ่ฐข่ฐข๏ผ
-
@hsjzyangbin said:
@tig said:
I too have a
lathe.rbthat is somewhat similar...ๅธๆๆ็ๆ่ฎฎๅฏนไฝ ็ๆไปถๆ็จ๏ผ่ฐข่ฐข๏ผ
Your proposal for my plug-in very useful, thank you!
Advertisement