[Plugin Library] LibFredo6 - v15.4d - 14 Aug 25

JQL

@rich o brien said:

Send the device HW ID you want released to support@sketchucation.com and we'll take a look

Hi Rich,

How can I find it? Is it in my Sketchucation account?

TIG

'HW ID' is shown on each extension's license dialog...
Use that...

Rich O Brien

@jql said:

@rich o brien said:

Send the device HW ID you want released to support@sketchucation.com and we'll take a look

Hi Rich,

How can I find it? Is it in my Sketchucation account?

Visit https://sketchucation.com/webshop/my-licences.php

Rich O Brien

Also make sure that your current device can release via the https://sketchucation.com/webshop/my-licences.php

Make sure you are using https://sketchucation.com/plugin/696-sketchucationtools latest along with latest extensions

If you are running the latest bleeding edge tech that is v4.2.9 you should be able to online release your current device.

novarider

Bonjour,

Je cherche à utiliser FredoScale, mais impossible.
J'ai bien suivi les instruction, mais le soucis est que je ne trouve pas comment acheter une licence.
Parlez vous de licence SketchUp ou licence SketchUcation ? Pouvez vous m'aider ? Merci

E192 - SketchUp Pro 2020 07_09_2022 20_48_32.jpg

Rich O Brien

@unknownuser said:

Hello I'm looking to use FredoScale, but impossible. I followed the instructions well, but the problem is that I can't figure out how to buy a license. Are you talking about a SketchUp license or SketchUcation license? Can you help me? Thank you

SketchUcation | List of Plugin Licences

(sketchucation.com)

or...

freeABC

下载速度咋这么龟速呢？

fredo6

NEW RELEASE: LibFredo6 v13.1a - 12 Sep 22

LibFredo6 13.1a includes:

Various fixes for my plugins
Support for future plugins

Requirements: SU2017 and above

See plugin home page of LibFredo6 for Download of LibFredo6.

Main Post of the LibFredo6 thread

Fredo

DCDP

Hello Fredo

I installed the latest version of LibFredo6. But Curviloft does not work and I can't open any setup window (Purge; Check for updates).

What I must to do ? Must I uninstall all your plugins and reinstall them ?

Thanks for your help.

fredo6

@dcdp said:

I installed the latest version of LibFredo6. But Curviloft does not work and I can't open any setup window (Purge; Check for updates).

What I must to do ? Must I uninstall all your plugins and reinstall them ?

Before launching Curviloft, could you open the Ruby Console. Then Launch Curviloft, and what the console for any error message.

By the way, do you have a Mac M1?

hyver

Problem: bith FredoTools and JointPushPull don't do anything when launched. I see the toolbars, and the button (for example ther "J" pushpull icon) stays grey, but I don't get the parameters window, nor can I do any pushing/pulling on my model (no group or component, just a simple shape)

Working on a M1 macbook pro. All plugins and lib updated, licenses paid for and validated.. frustrating!

Here's the ruby console feedback: the first part is for trying to launch FredoTools, and after that the JPP

Error: #<NoMethodError: undefined method wdlg_from_key' for Traductor::Wdlg:Class> /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6webwdlg.rbe:36:in check_instance_displayed'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6quicklauncher.rbe:42:in invoke' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_fredotools/fredotools.rbe:233:in invoke_quick_launcher'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_fredotools/fredotools.rbe:268:in block in startup' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1465:in command_invoke'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1445:in block (2 levels) in build_config_commands' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1385:in block in add_command'
ORIGINAL LAUNCH ACTION
LAUNCHER TEM 9168209029.82654
Error: #<NameError: undefined method notify_by_otpicker' for class Traductor::FaceSelector'>
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/body_lib6faceselector.rbe:66:in method' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/body_lib6faceselector.rbe:66:in initialize__'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6faceselector.rbe:35:in initialize' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/jointpushpulltool.rbe:409:in new'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/jointpushpulltool.rbe:409:in init_face_selector' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/jointpushpulltool.rbe:151:in initialize'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/jointpushpulltool.rbe:85:in new' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/jointpushpulltool.rbe:85:in action__mapping'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:144:in call' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:144:in launch_action'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:241:in launch_action' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/bootstrap_jointpushpull.rbe:87:in launch_action'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/bootstrap_jointpushpull.rbe:135:in block in declare_command' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1465:in command_invoke'
/users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1445:in block (2 levels) in build_config_commands' /users/wouterdewinter/library/application support/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1385:in block in add_command'

fredo6

There are problems which seems to be exclusive to the MacOS M1 platforms.

So, I published a Rollback to

I hope this will be temporary, although I don't know yet what is the problem.

For users of other Platforms (Windows and Mac non-M1), you can safely keep LibFredo6 v13.1 and JointPushPull v4.6a.

Sorry for inconvenience.

Fredo

DCDP

@fredo6 said:

@dcdp said:

I installed the latest version of LibFredo6. But Curviloft does not work and I can't open any setup window (Purge; Check for updates).

What I must to do ? Must I uninstall all your plugins and reinstall them ?

Before launching Curviloft, could you open the Ruby Console. Then Launch Curviloft, and what the console for any error message.

By the way, do you have a Mac M1?

No, I'm working on iMac with Intel Processor.
But today everything is ok. It seems that the computer relaunch did be more efficient than a simple Sketchup relaunch.

Thanks for your help (even by mind)

fredo6

@dcdp said:

But today everything is ok. It seems that the computer relaunch did be more efficient than a simple Sketchup relaunch.

There may be problems when you install LibFredo6 and have several instances of Sketchup open. You need to close them all.

DCDP

@fredo6 said:

@dcdp said:

But today everything is ok. It seems that the computer relaunch did be more efficient than a simple Sketchup relaunch.

There may be problems when you install LibFredo6 and have several instances of Sketchup open. You need to close them all.

I have closed entirely Sketchup.

fredo6

NEW RELEASE: LibFredo6 v13.2a - 16 Sep 22

LibFredo6 13.2a includes:

Various fixes for my plugins
Support for future plugins

Note that the problem with Mac M1 platform, present in v13.1a, has been solved.

Requirements: SU2017 and above

See plugin home page of LibFredo6 for Download of LibFredo6.

Main Post of the LibFredo6 thread

Fredo

Gus R

Fredo,

When I click on check for updates nothing happens.

Window: Libfredo6 Setting: Check Fredo6 Plugins for Updates. Nothing under there works until I click on Default Parameters and then is starts working.

This is the error from the Ruby Console:

Error: #<NoMethodError: undefined methodwdlg_from_key' for Traductor::Wdlg:Class>
c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6webwdlg.rbe:36:in check_instance_displayed' c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6upgrade.rbe:58:in top_dialog'
c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:336:in block in populate_support_menu' c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1385:in block in add_command'`

Gus R

Fredo,

Never mind. I uninstalled and reinstalled the Fredo6 library and it's all back to normal.

Gus R

Fredo,

This is happening again with the same Ruby console errors and work around only this time uninstalling and reinstalling LibFredo didn't work. The rest of your plugins are working fine.

@gus r said:

Fredo,

When I click on check for updates nothing happens.

Window: Libfredo6 Setting: Check Fredo6 Plugins for Updates. Nothing under there works until I click on Default Parameters and then is starts working.

This is the error from the Ruby Console:

Error: #<NoMethodError: undefined methodwdlg_from_key' for Traductor::Wdlg:Class>
c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6webwdlg.rbe:36:in check_instance_displayed' c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6upgrade.rbe:58:in top_dialog'
c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:336:in block in populate_support_menu' c:/users/z590-e/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1385:in block in add_command'`

fredo6

This bug is normally fixed in LibFredo6 v13.3a, just published.