[Plugin] BezierSpline - v2.2a - 22 Apr 21

Daniel S

wish to have a visual interface control nodes of the function like YAD
here is an example:

About visual interface control nodes... Something like this is possible? (Like most 2d Vector software)

"A quadratic Bézier curve has a start and an end point (blue dots) and just one control point (red dot) while a cubic Bézier curve uses two control points."

http://www.caffeineowl.com/graphics/2d/vectorial/bezierintro.html

Daniel S

hsjzyangbin

@daniel s said:

@hsjzyangbin said:

wish to have a visual interface control nodes of the function like YAD
here is an example:

About visual interface control nodes... Something like this is possible? (Like most 2d Vector software)
[attachment=1:21zf7cs5]simulation.gif[/attachment:21zf7cs5]

[attachment=2:21zf7cs5]bezier.png[/attachment:21zf7cs5]
"A quadratic Bézier curve has a start and an end point (blue dots) and just one control point (red dot) while a cubic Bézier curve uses two control points."

http://www.caffeineowl.com/graphics/2d/vectorial/bezierintro.html

Daniel S

maybe some difference:

visual interface control number of nodes
[flash=][attachment=0:21zf7cs5]2010-03-18_0456.swf[/attachment:21zf7cs5][/flash]

thank you

2010-03-18_0456.swf

thanhsjc

thank you very much

kyyu

Hi Fredo6,

First of all, thank you very much for this wonderful plugin! I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.

-Kwok

Convert to Catmull Spline bug.png

fredo6

@kyyu said:

Hi Fredo6,

First of all, thank you very much for this wonderful plugin! I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.

-Kwok

You need to explictly close the loop, by hitting the Key F9 (or via contextual menu).

Fredo

kyyu

@unknownuser said:

@kyyu said:

Hi Fredo6,

First of all, thank you very much for this wonderful plugin! I would like to report a small bug with the "Convert to Catmull Spline" feature. One of the segments is always left out of the conversion.

-Kwok

You need to explictly close the loop, by hitting the Key F9 (or via contextual menu).

Fredo

Thanks, that worked perfectly!

-Kwok

Slimdog

Hi guys I have just downloaded the most recent version. BezierSpline%201.

I have put LibTraductor.rb, BZ_Dir_13, and bezierspline.rb into the plugins folder on my MAC. When I open sketchup I get this error:

Error Loading File #extrusionToolbar.rb
no such file to load -- deBabelizer.rbError Loading File 2D#.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByEdges.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByFaces.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByLathe.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByRails.rb
no such file to load -- deBabelizer.rbError Loading File extrudeEdgesByVector.rb
no such file to load -- deBabelizer.rb

any ideas guys???

Cheers

Steve

thomthom

That's messages related to TIG's tools. you're missing one of his dependant files deBabelizer.rb.

TIG

Since you must have downloaded both my 2DTools and ExtrusionTools I wonder where you put deBabelizer.rb that comes with both of them ?
Anyway... here's another copy to save you having to find it - put it into the Plugins folder and restart SUp - that error should then be gone...deBabelizer.rb

Slimdog

Yes you guys are correct. My bad. I thought it out when I was loading Bezierspline.

Thanks for the responses.

S

Morphing_24

Hi fredo

I work on a mac and I have a really big problem here.
I dont know how can I view the cadfather toolbar on sketchup, I can only see the standard one and I installed all the files in the correct places bezierspline.rb, LibTraductor.rb and BZ_DIR_13 subfolder. I don't even see the option "convert to" when I right click on a bezier line , I need to use the polyline segmentor and courbette. I tried everything...reinstalling sketchup, also removing all the plugins I have from the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder,but guest what, I still see all the toolbars working perfectly even though the plugin folder is empty.
However, when I work on windows I have no problems, I install the latest bezierspline and it works perfect.... what am I doing wrong?
Thanks for the responses

inasia

Many Thanks Fredo,

Much appreciated, for your Plugin.

Thank you again

have a good day

cheers

inasia

fredo6

@morphing_24 said:

Hi fredo

I work on a mac and I have a really big problem here.
I dont know how can I view the cadfather toolbar on sketchup, I can only see the standard one and I installed all the files in the correct places bezierspline.rb, LibTraductor.rb and BZ_DIR_13 subfolder. I don't even see the option "convert to" when I right click on a bezier line , I need to use the polyline segmentor and courbette. I tried everything...reinstalling sketchup, also removing all the plugins I have from the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder,but guest what, I still see all the toolbars working perfectly even though the plugin folder is empty.
However, when I work on windows I have no problems, I install the latest bezierspline and it works perfect.... what am I doing wrong?
Thanks for the responses

If the Library/AplicationSupport/Google Sketchup 7/Sketchup/ plugins folder is empty and you still have BezierSpline working, then you may have something left in the other plugin folder which is under /user/....

Otherwise, maybe some Mac users could help you to troubleshoot, as I don't have a Mac at hand.

Fredo

fredo6

@unknownuser said:

Thank you so much for this fantastic plugin Fredo6. Is there a way to tweak the snap? I'm a little heavy handed with the mouse - it's very easy for the cursor to fall off the line, or to move a line segment instead of a point when editing polylines.

The script relies on the regular Sketchup inferences. So if there is a way to tweak it, then it should be valid for BezierSpline too.

Fredo

kurma

Thanks for the quick reply Fredo6. It's not in any options that I can see. Perhaps it's something a Ruby script can do. But a cursory search for such a script lead nowhere.

kurma

Thank you so much for this fantastic plugin Fredo6. Is there a way to tweak the snap? I'm a little heavy handed with the mouse - it's very easy for the cursor to fall off the line, or to move a line segment instead of a point when editing.

xyzt

Mac user here...

The CadFather tools disappeared, I had them working, but after installing the spheretool.rb it they when missing...

sus4

Dominant XYZ with available?

TIG

Bump! New version available... http://forums.sketchucation.com/viewtopic.php?p=100509#p100509

Gaieus

Thanks Fredo for the new version!