Animator: Parametric Animation plugin - Discussion

whiterabbit

I think I figured it out. I thought you had to assign a curve to the beginning view and then a curve to the end view. Seems that an "s" curve only on the front view accelerates and then decelerates from one view to the other.

GameOfBoxes

Hi Fredo,

Hope this thread is still somewhat active. I made a post over in Extensions looking for help.

Let me know what you think!
https://sketchucation.com/forums/viewtopic.php?f=80&t=70288&e=0

fredo6

@gameofboxes said:

Hi Fredo,

Hope this thread is still somewhat active. I made a post over in Extensions looking for help.

Let me know what you think!
https://sketchucation.com/forums/viewtopic.php?f=80&t=70288&e=0

This is difficult to do with Animator, and more something to construct with MSPhysics(by Anton S), as you just need to define some hinge constraints between the 3 objects.

In some particular cases, like yours, you can simulate it with Animator, as illustrated with the video below

moderatelyfunky

Thanks for your amazing work, Fredo. I'm just trying to learn how to use Animator.

I'm confused about why the clip sequencer will reposition clips after I've placed them. It seems to have some built-in logic that wants to move a clip from one track to another and I can't figure out how to override it so that I can lay them out the way I want.

In the picture I've attached, I had all the movements in one track and the scaling in another. When I saved, Animator shuffled the Scaling and Movements.

Is there a switch I can flip, or can you explain the logic behind the automatic rearranging?

fredo6

@moderatelyfunky said:

Is there a switch I can flip, or can you explain the logic behind the automatic rearranging?

Currently the re-arrangement is automatic, that is the track on which clip elements are put. Usually, cameras are on the first tracks.
I am thinking of letting freedom to the user in a next version however.

moderatelyfunky

Thanks for the reply. I wouldn't care, but it's having an impact on the end result. With the scaling reshuffled by Animator, the second path movement starts in a slightly different location.

fredo6

Normally, the re-ordering of tracks does not change the start time and duration of the clip elements.

Do you observe something different?

moderatelyfunky

I created a simple scene to confirm and found that the point of contact stays put when the path remains where I placed it, but when saving rearranges the clips the point of contact is no longer connected to the corner I specified and scaling expands the corner away from the curve.

I couldn't consistently reproduce it, but with this example the tracks stayed put after closing and reopening the SketchUp file.

I've attached the file.

If you have any advice I'd appreciated it.

Thanks!
Joe

SketchUp Pro 2020
20.0.363 64-bit

Animator 2.6a - 12 Jan 20

ClipSeq_AfterAddingScaling.skp

fredo6

I assume you want the corner to stay along the path.

If so, then your scaling should be done from the opposite corner handle.

Animator - scaling along path.gif

Here is the file corrected

ClipSeq_AfterAddingScaling - right handle.skp

moderatelyfunky

Thanks for taking the time to answer such a dumb question! I'm starting to get comfortable with Animator and loving it. Thanks again!

carlurcia

Hi,
I´m having a problem with Animator after not using it for months. I used to put "tracking cameras" for following objects and trying to smooth the transition between the "sketch up cameras". But everything works well except de "tracking cameras" which block the Animator and don´t allow you to continue with the video.

Sketch up 2020
Animator_v3.2a
LibFredo6_v11.6a
SketchFXEx-3.0.2
AmbientOcclusionEx-2.8.0

Thank you very much for any suggestions

fredo6

@carlurcia said:

Hi,
I´m having a problem with Animator after not using it for months. I used to put "tracking cameras" for following objects and trying to smooth the transition between the "sketch up cameras". But everything works well except de "tracking cameras" which block the Animator and don´t allow you to continue with the video.

Could you post or PM me the model so that I have a look.

Many thanks

Fredo

Krass

Hello,
I’ve got a decent handle on Animator now (thanks again!). However, I’m not quite sure how to proceed with my current project: I’ve started this little animation, but I want to animate both VU meters in parallel. I’m wondering how best to go about this.
For this animation, I created a small rectangle that I scale up to gradually cover the indicator lights.
I need a way to copy and paste this animation so I can position it over the VU meter on the right. Is it possible to copy this rectangle—along with its grouped animation properties? Or, alternatively, can I create a copy and then apply the settings from the first animation to it?
I do see an option to clone the clip...
Thanks for your suggestions!

SketchUp_tnY7qsbzu9.mp4

I have just paid for my license

I am also looking for a way to repeat this animation throughout the entire duration of the main clip, without having to copy and paste this short clip multiple times...

Krass

Hello,
I found the solution by taking a closer look at the user manual.
It’s perfect and couldn’t be simpler. Thanks again for this brilliant program!

animation.mp4

Simply select two objects to which the same animation will be applied when creating a new movement.

Krass

le souci est que je n'arrive pas à répéter cette série de mouvements pour les vu mètre que j'ai convertie en clip. Si j'affecte -1 à a valeur de répétition, (forever) il ne joue qu'une seule fois. Si je place d'autres copies du clip l'une après l'autre, les copies ne jouent pas.

fredo6

Difficile d'aider sans voir le fichier.
La repetition suppose que le clip a une duree definie

Krass

Bonsoir,
veux tu le fichier?

Krass

SwissTransfer - Send large files securely and free of charge

Send up to 50 GB - Free and no registration required - Keep your transfers for 30 days

SwissTransfer (www.swisstransfer.com)

un lien vers le fichier https://www.swisstransfer.com/dl/01a1bda1-f434-7164-9ea8-a97f73fa6a29
mais depuis j'ai installé une extension concoctée par Chat GPT pour un mode sombre sketchup qui marchait très bien et Animator a perdu toute fluidité, la petite animation des vu mètres semble inactive et la lecture dans le viewport du clip est saccadée c'est difficilement utilisable. avant l'installation de l'extension, c'était fluide, je ne comprends pas. Cette extension utilise les palettes Qt (je n'y connaîs rien) et le fait de la désinstaller n'a rien changé. mais je me suis quand même dit qu'il y avait un lien..