[Plugin][$] FredoCorner - v2.7a - 31 Mar 24

fredo6

@fredo6 said:

What do you mean exactly by storing "material id"

I mean material IDs like in other other programs, which can be used for multi materials, random materials, object distribution or selection sets.

Ok, I see the concept, and it might be useful.
However, all what is shown in the videos seems to be beyond the power of Sketchup, unless this is implemented natively or explicitely supported by the Ruby API.

Since SU2017, where a change was introduced that severely damaged the only robust pattern to control the generation of geometry based on temporary groups, it is extremely difficult to propagate information when you create new geometry derived from an old one containing this information. It is challenging, even for something as simple a FredoCorner, where the only information I propagate is about edge properties and face materials.

So I am afraid that extensions will remain fairly limited in this domain, and for the concept of modifiers too, except in some specific situations.

Fredo

cmd

Hello Fredo. Great stuff!! Thanks for building this.

I am seeing a possible bug. --> Except for zoom, I am not able to navigate the model with my mouse while FredoCorner is active. To be specific, Pan (Middle mouse button + shift) and Orbit (Middle mouse button) do not work via the mouse controls.

Navigation DOES work while using your Round Corner extension

Mac HighSeirra 10.13.6
SketchUp Pro 2018, Version 18.0.16976

Cheers
CMD

Ahmed0007

Thank You Fredo
i hope i can do this in paid version

Oxer

@fredo6 said:

What is Ctrl+Command doing exactly.

On Mac you can orbit while you use another tool (i.e draw a line) without the neccesity to exit of the tool to orbit.
I can't test the shortcuts above because I use a Apple Magic Mouse, there isn't middle button:
- Middle mouse button --> orbit
- Middle mouse button + shift --> Pan
- Middle mouse button + Ctrl --> Free orbit (i.e. not keeping horizontal floor)
- Middle mouse button + Left mouse button --> Pan

@cmd said:

To be specific, Pan (Middle mouse button + shift) and Orbit (Middle mouse button) do not work via the mouse controls.

Navigation DOES work while using your Round Corner extension

Mac HighSeirra 10.13.6
SketchUp Pro 2018, Version 18.0.16976

@fredo6 said:

PS: For the translation, very kind of you. Thank you. Actually, in v1.1a, not all strings are exposed yet, so there will be a remaining part (same for LibFredo6)

Ok, I will translate it when you add all strings.

pilou

Are you interested by the French version ?

fredo6

@pilou said:

Are you interested by the French version ?

Pilou,

Thanks, I think I will manage. The point is that I did not expose yet all the strings.

Fredo

fredo6

@cmd said:

Hello Fredo. Great stuff!! Thanks for building this.

I am seeing a possible bug. --> Except for zoom, I am not able to navigate the model with my mouse while FredoCorner is active. To be specific, Pan (Middle mouse button + shift) and Orbit (Middle mouse button) do not work via the mouse controls.

Navigation DOES work while using your Round Corner extension

Mac HighSeirra 10.13.6
SketchUp Pro 2018, Version 18.0.16976

Cheers
CMD

Well, Yes, I should have thought that Macs would have a problem with this, probably in relation with the values of flags in the mouse events, which I forgot are not the same as on Windows.

Could a Mac user does the following:

Copy the attached rb file TestMacMouse.rb ito its Plugin directory
Open the Ruby console and type flag_mac. This starts a dummy tool tracing the Move and Middle button events
Press the Middle Mouse button, move around and release. Type Spacebar to end the test
Reply to this post with what is displayed in the Ruby console

Thanks in advance.

And sorry for inconvenience for Mac users.

Fredo

TestMacMouse.rb

pilou

@Fredo : Pas de problème, d'ailleurs je n'avais même pas trouvé le fichier!
Windows est un tel labyrinthe !

fredo6

On ORBITING on MAC.

I jut published LibFredo6 8.6b, where I tried 'blindly' to fix the problem of Orbiting on Mac.
Thanks to advise

Fredo

fredo6

@pilou said:

@Fredo : Pas de problème, d'ailleurs je n'avais même pas trouvé le fichier!
Windows est un tel labyrinthe !

Actually, in my plugins, you translate from within the plugin, not from files: Menu "Language Translation".

But don't worry I'll take care of French in due time.

Fredo

dihe

Tank you Fredo,
Variable offset is grate thing!
Grate job!

fredo6

NEW RELEASE: FredoCorner v1.1a - 06 Sep 18

FredoCorner 1.1a is the first public release.

Requirement: LibFredo6 8.6b

Please note that:

there are known issues and likely bugs here and there
This concerns in particular the Collision, i.e. when the offset is too large.
Terminal corners (that is with a single edge) may present issues and bugs
Variable offset tools are experimental
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

cmd

@fredo6 said:

Reply to this post with what is displayed in the Ruby console

Fredo,

Your TestMacMouse.rb test results are below:

MButton down flags = 33554432
OnMouseMove flags = 33554432
MButton Up flags = 0

Also, after installing LibFredo6 8.6b, the Pan & Orbit bug appears to be fixed

I hope this helps

CMD

fredo6

@cmd said:

Also, after installing LibFredo6 8.6b, the Pan & Orbit bug appears to be fixed

I hope this helps

CMD

Many thanks. Very helpful indeed.

Fredo

fredo6

NEW RELEASE: FredoCorner v1.1b - 08 Sep 18

FredoCorner 1.1b includes a fix for the orbiting on Mac platforms, as well as a first translation in Spanish by Oxer.

Requirement: LibFredo6 8.6c

Please note that:

there are known issues and likely bugs here and there
This concerns in particular Collisions, i.e. when the offset is too large.
Terminal corners (that is ending on a single edge) may present issues and bugs
Variable offset tools are experimental
No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.

Arc

Thank you Fredo for your great work.
I created the Chinese simplified language file, here is:
FredoCorner_ZH.lang

JQL

Amazing work Fredo. It's really impressive how much you've put into it.

I always avoid using round corners just because of everything you've tried to circumvent with FredoCorner, so even if I'm already so used to avoid them I will definetely give this one a try.

Thanks for pushing the boundaries! (around corners)

PS: I hope this can open new paths to a lot of stuff being it at the core of Sketchup or only at plugin side of things… let's see what happens!

PS2: I'm not offering for a PT version because I'm out of time, but if you don't have someone else doing it and if you need it, then don't hesitate to ask and I will find the time.

Pixero

Would it be possible with some kind of Global on/off switch so we can keep SU light and just turn it on before rendering?
Maybe even some code that render engines could use to have it render even without turning it on in SU view?

rv1974

GhostComps?

JQL

@pixero said:

Would it be possible with some kind of Global on/off switch so we can keep SU light and just turn it on before rendering?
Maybe even some code that render engines could use to have it render even without turning it on in SU view?

+1 For the Toogle

+1 For the Render engine only corners

The preview mode is much faster than generating geometry. Would it be possible to send it to a render engine like Thea instead of the sketchup geometry?

A bit like Skatter does.