[Plugin] SketchUV - now free

Tobobo · 27 Nov 2014, 08:15

It even looks great when rendered...

That's great

Thanks mate!

Zacchia · 22 Apr 2015, 12:27

Many thanks for this nice plugin!!

rombout · 6 May 2015, 15:53

I got a question. Ive read somewhere when import a obj mesh which gets triangulated at normal size (for me metric) better use a smaller import size. Im using meter in blender and than import it as inch into SU, cm still gives triangles and mm cuts holes.

what scale do i need to use to set it back to meter. Im searching google but im not sure what keywords i need to use. Im non english person so bit harder for correct translation.

Doing my own tests i came around 39.35% when i use the scale tool in SU, im still a bit off. Anyone here who knows the exact scale method

rombout · 6 May 2015, 16:07

After checking again and using a simple cube i found that 39.37% scale is exact. I could also use the tape measure ofcourse, i totally forgot about that function. Measuring the down scaled part and than simply typing the exact number.

Now i wonder why the scale is such awkward number, any know familiar with this

Zacchia · 6 May 2015, 16:12

This is because 1 m is about 39.37 inches I think...

AcesHigh · 9 Jun 2015, 18:38

I suppose this is not the place... or maybe it is... but I followed the Roadkill SketchUV road mapping tutorial and it didn´t work at all.

The problem was that my road had a more complex triangulation and when I started pulling the border vertexes arond at RoadKill, Roadkill did not know how to deal with the vertexes in the middle of the road... it resulted in a bad mess, specially when I would pull the right vertexes to the right side of the map... there were triangles jumping all over the place inside Roadkill

dacastror · 20 Sept 2015, 22:55

mistakes like this are appearing on the console

Error: #<NameError: uninitialized constant DM_SketchUV::DM_UVTool::Set>

I'm using Sketchup 2015. When you use version 1.0 works fine, but there are flaws in version 1.0.1

Whaat · 22 Sept 2015, 18:35

@dacastror said:

mistakes like this are appearing on the console

Error: #<NameError: uninitialized constant DM_SketchUV::DM_UVTool::Set>

I'm using Sketchup 2015. When you use version 1.0 works fine, but there are flaws in version 1.0.1

Thanks for the report - I'll look into it. Are you sure you have the latest version installed?

BSquared18 · 19 Oct 2015, 18:06

**Hello Dale,

I started a thread titled "Need Help Using SketchUV for UV mapping" at:

http://sketchucation.com/forums/viewtopic.php?f=80%26amp;t=63227%26amp;p=578909#p578909

In short, I am trying to UV-map the texture from a .png file to a SketchUp 3D model of an aircraft instrument panel. The details are in the above-mentioned thread.

I've gone through the steps listed in your tutorials, except that instead of applying a texture from SU's Paint Bucket palette, I have tried to import it using SU's Import Texture feature.

But after applying it and trying to export it using Marginal's SU2XP plugin, I do not get the desired effect.

Do you have any suggestions?

Thank you,
Bill**

hsrhdrehre5654654 · 2 Feb 2016, 21:15

Great tool. Just one question.. im trying to export the uvs. Here is the problem, i set the extraction path in, for example d:/ , then i go to options - export uvs, and a msg appear saying that the uvs have been exported. Well, i cant find the obj file anywhere. And since in the msg box there is not info about the path itself, im totally lost. My guess is it is exporting the uvs to the default folder instead. So, what is the default folder where the uvs are exported?

hsrhdrehre5654654 · 2 Feb 2016, 21:19

Oh well. NVM. It turns out i was "saving" the uvs, not exporting rofl!!! sorry my bad.

derei · 15 Feb 2017, 14:25

Can't export UVs. The error is "Unable to export UVs" and after a quick inspection in the console, it seems the default export path doesn't exist anymore (indeed, the folder was renamed). The problem is that I have no idea how I can convince the plugin to export somewhere else...

Please help!

derei · 15 Feb 2017, 14:42

@derei said:

Can't export UVs. The error is "Unable to export UVs" and after a quick inspection in the console, it seems the default export path doesn't exist anymore (indeed, the folder was renamed). The problem is that I have no idea how I can convince the plugin to export somewhere else...

Please help!

Solved - I deleted the REG entry. Nonetheless, should address the issue in a better manner (if path not found, to prompt for a new path).

Cheers!

sicksickisck · 15 Mar 2017, 22:03

EXPORT UV, BUG SKP 2016

Whaat · 16 Mar 2017, 14:04

@sicksickisck said:

[attachment=1:2ohepcgx]EXPORT UV.JPG[/attachment:2ohepcgx]
EXPORT UV, BUG SKP 2016[attachment=0:2ohepcgx]VER.JPG[/attachment:2ohepcgx]

Do you have the entire ruby output available?

I'm guessing you might have a conflicting plugin.

kubap · 27 Mar 2017, 12:25

Hi, sketchup says that this plugin is unidentified (doesn't have digital signature) and therefore may be risky to use. I don't have this issue with other plugins.

Whaat · 29 Mar 2017, 15:09

@kubap said:

Hi, sketchup says that this plugin is unidentified (doesn't have digital signature) and therefore may be risky to use. I don't have this issue with other plugins.

Thanks for the note - the current version on the EW might not have a signature. I'll have to fix that.

kcezario_ep · 4 Apr 2017, 18:50

I do not know why this happens to me always.
Some faces never get right

Whaat · 5 Apr 2017, 14:27

@kcezario_ep said:

I do not know why this happens to me always.
Some faces never get right

Have you checked the Ruby Console for errors?

lBeral · 2 Aug 2017, 22:22

@derei said:

@derei said:

Can't export UVs. The error is "Unable to export UVs" and after a quick inspection in the console, it seems the default export path doesn't exist anymore (indeed, the folder was renamed). The problem is that I have no idea how I can convince the plugin to export somewhere else...

Please help!

Solved - I deleted the REG entry. Nonetheless, should address the issue in a better manner (if path not found, to prompt for a new path).

Cheers!

If someone have the same problem the registry's path is
"HKEY_CURRENT_USER\Software\SketchUp\SketchUp 2017\UVTools"