[Plugin][$] Curviloft 2.0a - 31 Mar 24 (Loft & Skinning)

fredo6 · 9 Aug 2014, 12:18

I tried with your model on SU14 (but Win7).

No issue with loft

But do you mean it happens with some models only, not all of them

Fred

alvis · 3 Sept 2014, 17:49

Three almost identical contours, three different results. Why ?

curvyskin.skp

Dave R · 3 Sept 2014, 17:59

Interesting. I get similar results. How did you draw them? What did you do differently from one to the next?

alvis · 3 Sept 2014, 18:15

@dave r said:

Interesting. I get similar results. How did you draw them? What did you do differently from one to the next?

I've used all the means and methods. I drew the curves with ARC tool. Then I tried to with BZ plugin. But the result is the same.

davidbierman2003 · 4 Sept 2014, 20:21

Hi,

I have the plug in working in Sketchup. Is there anyway to not include certain portions of what the surface will form? For example, I am working on creating a surface for roads. The roads cover a large surface, and the program creates a large surface covering everything. I just want a surface to cover the roads.

Thanks,

David

jgb · 5 Sept 2014, 14:40

@davidbierman2003 said:

Hi,

I have the plug in working in Sketchup. Is there anyway to not include certain portions of what the surface will form? For example, I am working on creating a surface for roads. The roads cover a large surface, and the program creates a large surface covering everything. I just want a surface to cover the roads.

Thanks,

David

Pre-select only the perimeter lines of what you want surfaced. You can include any lines within the perimeter, if you want. Then click the skinning icon.

Negatee · 14 Sept 2014, 17:06

thx !!!

robmoors · 9 Oct 2014, 10:19

Amazing plugin, incredible amount of control. Thank you!

jumpjack · 18 Oct 2014, 18:40

I can't understand how (if) I can use this plugin to fill the many holes in this model:
http://img22.imageshack.us/img22/7514/zar8.jpg

I select the contour of a hole, but none of the three buttons of the plugin is able to fill the hole for me.

TIG · 18 Oct 2014, 21:26

Why can't you attach the image ?
It's a bit much to ask someone to download and then view it...
You could even attach part of the SKP so we could look at it
Anyway what makes you think CurviLoft 'heals' holes ?

jumpjack · 19 Oct 2014, 15:09

@tig said:

Why can't you attach the image ?

It's a bit much to ask someone to download and then view it...

You've just to click the above,link, anyway here it is:

@tig said:

You could even attach part of the SKP so we could look at it
Anyway what makes you think CurviLoft 'heals' holes ?

Because it does in one case: "skinning" works fine in filling holes on a flat surface; I thought it could also do it for a generic contour.
Anyway I'm not sure it actually can for any contour: that's why the "if" in parenthesis.

Do I need a different plugin?

Dave R · 19 Oct 2014, 15:18

It might be that Curviloft could close up the holes. Maybe there's a different plugin that would do it. Without the model, it's not possible to give you a definitive answer.

BTW, please complete your profile with SU version and operating system.

Box · 19 Oct 2014, 16:24

'Clicking the link above' only takes you to the page to download it. You still then have to download it to view it.

fredo6 · 19 Oct 2014, 21:21

NEW RELEASE: Curviloft v1.4a - 19 Oct 14

Curviloft 1.4a is required for the support of usernames with non-ascii characters in Sketchup 2014

See main post of this thread for Download.

Fredo

jumpjack · 20 Oct 2014, 07:45

@box said:

'Clicking the link above' only takes you to the page to download it. You still then have to download it to view it.

Clicking THIS link takes to a download page?!?
http://img22.imageshack.us/img22/7514/zar8.jpg

Anyway, it looks the plugin can actually fill the holes, although for most irregular contours it gives weird results. I wonder if it is tunable to get the "filling" as flat as possible.

Additionally, how could I get this selection

from this manual selection?

Box · 20 Oct 2014, 08:14

@jumpjack said:

@box said:

'Clicking the link above' only takes you to the page to download it. You still then have to download it to view it.

Clicking THIS link takes to a download page?!?
http://img22.imageshack.us/img22/7514/zar8.jpg

In a word, Yes.

As mentioned in the other thread where you asked, By smoothing the lines surrounding the edges of the hole you can create one surface that is easy to select.

jumpjack · 20 Oct 2014, 08:43

@box said:

By smoothing the lines surrounding the edges of the hole you can create one surface that is easy to select.

I have dozens of such holes in my model, each one delimited by a contour made of several dozens of segments: doing it by hand would take years... That's why I'm looking for some kind of automation. Maybe I need some kind of "simplify polyline" plugin, but don't know if it even exists or CAN exist.

Box · 20 Oct 2014, 09:37

I think you'd have more luck repairing you mesh in Meshlabs or similar.
Sketchup isn't really designed to do what you want whereas software like Meshlab, Nettfab etc are .

jumpjack · 20 Oct 2014, 11:41

@box said:

I think you'd have more luck repairing you mesh in Meshlabs or similar.
Sketchup isn't really designed to do what you want whereas software like Meshlab, Nettfab etc are .

No, they try to fix whole model in a single pass, it's too complex and they fail.
Using sketchup I could "fine tune" the model sub-region by sub-region.

Box · 20 Oct 2014, 11:59

There is no one way to fix it. At a guess looking at the picture with seeing the actual model, one way would be to select sections and smooth them so you have clearly defined holes within selectable surfaces. Then select a hole and use soapskin bubble to skin it. Continue until all holes are skinned and put all the sections back together.