[Plugin] Lines to tubes

[finhario]

@ckho1985 said:

@tig said:

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

Working in Mac… not sure what to do

i do all the steps but still it's not working please help

[TIG]

@Mario

What have you done exactly ?

The attached version should work on MAC or PC...
I have tested it on both platforms, and it works fine for me !

Compare it to your own effort ??

Remember that the menu item is under Tools NOT Plugins !

---

lines2tubes.rb

[Refka]

@tig said:

What have you done exactly ?

The attached version should work on MAC or PC...
I have tested it on both platforms, and it works fine for me !

Compare it to your own effort ??

Remember that the menu item is under Tools NOT Plugins !

Thanks a lot TIG very useful..

[solo]

Where is this tool hiding?, it's not in plugins, not on right click and not in tools.

[sdmitch]

It should be on the Tools menu as "Convert arcs,circles,curves,lines to cylinders".

[solo]

@sdmitch said:

It should be on the Tools menu as "Convert arcs,circles,curves,lines to cylinders".

That's how it is in SU 2013, but not 2014, strange it's in plugin folder and all but not showing up.

[Dave R]

Pete, which file did you download? I downloaded Didier's and it didn't work for me but when I downloaded and installed TIG's version and restarted SketchUp, it did. I converted TIG's version to .rbz (which I am attaching) to make it quick to install. I still had to close and restart SU to get it to show in the Tools menu.

---

lines2tubes2.rbz

[solo]

@dave r said:

Pete, which file did you download? I downloaded Didier's and it didn't work for me but when I downloaded and installed TIG's version and restarted SketchUp, it did. I converted TIG's version to .rbz (which I am attaching) to make it quick to install. I still had to close and restart SU to get it to show in the Tools menu.

That worked, thanks Dave.

I have a few plugins just like this that did not install in SU 2014, I now have a trick.

[shawnyeh]

hello,
I got the same situation that can't find lines2tube in tool menu bar in MAC sketchup2014 .
Is there anyone can help me out ?

Thanks.

---

[shawnyeh]

Thanks Dave, it works!!

[helik]

Thank you very much Dave!

[chris87]

Great plugin !
Thank you !

[TIG]

Please get the latest v2014/2015 compatible version from the PluginStore http://sketchucation.com/pluginstore?pln=lines2tubes

[chauhuyphan]

Great plugin! Thanks you !

[josephkim626]

As I am often giving precision 4 to give a rectangular look, im just wondering if there would be a way to rotate the profile 45 degrees. Effectively, having a rectangular tubes.

[sdmitch]

@josephkim626 said:

As I am often giving precision 4 to give a rectangular look, im just wondering if there would be a way to rotate the profile 45 degrees. Effectively, having a rectangular tubes.

Yes, but this particular plugin is scrambled so only the creator can make that change.

In the mean time, maybe this will help. You can copy and paste into the Ruby Console to try it out.

mod = Sketchup.active_model
ent = mod.active_entities
sel = mod.selection
unless sel.empty?
  vars=UI.inputbox(["Number of Sides;"," Length of a Side;","Angle of Rotation;"],[4,1,45],"Tube Specifications")
  if vars
    n,l,d=vars
    a=180/n
    r=l/Math.sin(a.degrees)/2
    edgs=sel.grep(Sketchup;;Edge)
    edgs.each{|e|
      p,v=e.line
      grp=ent.add_group;ge=grp.entities
      tube=ge.add_ngon(p,v,r,n)
      face=ge.add_face(tube)
      ent.transform_entities(Geom;;Transformation.rotation(p,v,d.degrees),face)
      face.followme e
      grp.explode
    }
  end
else
  UI.messagebox "Select Edges"
end

[ntxdave]

While I like the plugin and seem some valuable uses, I am having a problem with it.

Here is a screen capture of the problem I am having:

I tried to be very careful when connecting the three segments (made sure the arch that connected the two straight lines was tangent) but I have many occasions where I will need to draw some pipes with multiple curves.

I will assume I am doing something wrong. I have also attached the skp file (I moved the resulting tube so that the original line can be seen).

---

Lines2Pipes.skp

[driven]

@nxtdave,
download tig_weld and weld your 3 lines first...
john

[ntxdave]

@driven said:

@nxtdave,
download tig_weld and weld your 3 lines first...
john

Already had weld installed. Just did not use it. When I welded the lines, it worked perfect. Even tried a freehand line and it worked fine as well.

Thanks..........I should have thought of that

Might be something that should be explored for a future release though. Just out of curiosity, I also have the free version of Profile Builder and it worked fine on the original lines though without using the Weld tool.

Just a thought..........

[josephkim626]

@sdmitch said:

@josephkim626 said:

As I am often giving precision 4 to give a rectangular look, im just wondering if there would be a way to rotate the profile 45 degrees. Effectively, having a rectangular tubes.

Yes, but this particular plugin is scrambled so only the creator can make that change.

In the mean time, maybe this will help. You can copy and paste into the Ruby Console to try it out.

mod = Sketchup.active_model
> ent = mod.active_entities
> sel = mod.selection
> unless sel.empty?
>   vars=UI.inputbox(["Number of Sides;"," Length of a Side;","Angle of Rotation;"],[4,1,45],"Tube Specifications")
>   if vars
>     n,l,d=vars
>     a=180/n
>     r=l/Math.sin(a.degrees)/2
>     edgs=sel.grep(Sketchup;;Edge)
>     edgs.each{|e|
>       p,v=e.line
>       grp=ent.add_group;ge=grp.entities
>       tube=ge.add_ngon(p,v,r,n)
>       face=ge.add_face(tube)
>       ent.transform_entities(Geom;;Transformation.rotation(p,v,d.degrees),face)
>       face.followme e
>       grp.explode
>     }
>   end
> else
>   UI.messagebox "Select Edges"
> end
> 

Thank you so much, this helped for me at least this time.
I had to remove "grp.explode" line as I wanted them to be a grouped members.
who is the creator of this plugin? I know it has been tossed around couple times.
(I will still need an option to use "mm" units, follow welded edges as solid)