[Plugin][$] FredoScale - v3.6a - 01 Apr 24

jonny kinhkha · 24 Jul 2013, 15:18

THANKS FREDO, I LOVE FREDO SCALE 2.2A

120711014 · 29 Jul 2013, 08:49

THANK YOU Fredo!!!!!!

rowandoyle · 10 Aug 2013, 15:42

Hello,

I know there is already a post on this topic, but it is a little advanced for this Newbie! This is my first attempt at downloading a plugin.
I am running Mac OSX and downloaded FredoScale into the appropriate folder - Library/Application Support/Google Sketchup 8/Sketchup/Plugins.

I also downloaded the LibFredo6 application (the accompanying software). I restarted my computer and sketch up and a new Ruby Console options appeared under windows, but I can't find the plugin.

Any help would be greatly appreciated! It is probably something obvious, but I don't know where else to look.

I am also super excited to try this tool!

Thanks...

Dave R · 10 Aug 2013, 21:34

If all you did was download and save the files into the Plugins folder, you didn't install them. You're right, this has been covered before. Many times. The link to FredoScale is for a ZIP file. You need to extract the contents of the ZIP file. You should wind up with a folder called FredoScale... When you download the LibFredo files you'll get either a ZIP file or the RBZ file depending upon the link you've clicked on. If you got the ZIP file, extract the contents making sure to respect and maintain the file structure. If you got the RBZ file, install it by going to Preferences>Extensions and click on Install Extension... Navigate to the location in which you saved the RBZ file, select it and click Open.

It would be easier in the future if you install the Sketchucation Plugin Store, linked above, and auto-install plugins after that.

fredo6 · 22 Aug 2013, 07:38

NEW RELEASE: FredoScale v2.4a - 22 Aug 13

FredoScale 2.4 is a technical release that implements naming conventions for files and folders to be compliant with EWH requirements. Otherwise there is no functional changes in this release.

FredoScale 2.4 requires LibFredo6 5.1 or higher.

The footprint for FredoScale is based on one file and one subfolder:

It is also a good idea to clean up your plugin directory and remove the older versions.
In the menu Windows > LibFredo6 Settings...> Purge Obsolete Files, you will find a dialog box allowing to remove all or some of these older versions.

See main post of this thread for Download.

Fredo

fredo6 · 1 Sept 2013, 10:52

NEW RELEASE: FredoScale v2.5a - 30 Aug 13

FredoScale 2.5 is a technical release that implements naming conventions for files and folders to be compliant with EWH requirements. Otherwise there is no functional changes in this release.

FredoScale 2.5 requires LibFredo6 5.2 or higher.

The footprint for FredoScale is based on one file and one subfolder:

It is also a good idea to clean up your plugin directory and remove the older versions.
In the menu Windows > LibFredo6 Settings...> Purge Obsolete Files, you will find a dialog box allowing to remove all or some of these older versions.

See main post of this thread for Download.

Fredo

flyashy · 3 Sept 2013, 07:40

@fredo6 said:

@macker said:

Does anyone else have sketchup crash completely when using the scale/stretch tool on groups that contain groups? I always use extensive grouping so that I can take my models into 3ds max, and this tool would undoubtedly speed up my workflow - but keeps crashing sketchup.

This may be related to the big issues of "freshly copied groups".

In your case, was one of the group a copy of another one (you should see "2 instances" in the Entity Info Window.

If this is the case, then FredoScale needs some evolutions. I have done it on Curvizard.

As a workaround for complex hirearchy of groups and components, try to perform a Make Unique before [highlight=#ffff80:1qv24jnd](Make Unique is also part of FredoScale).[/highlight:1qv24jnd]

Fredo

I didn't understand that bit about Make Unique being part of fredoscale.
Is there a hidden option in FredoScale command that allows me to make the group unique?
(I work with groups within groups within groups within.. with a smattering of components thrown in the mix and copies of them all floating all over my models, all the time and could never use fredoStretch as it gives a splat.)
Or alternately is there a way to make the copied 'group' unique? Components I know, groups I don't know how to make unique.
Cheers,
flyashy

TIG · 3 Sept 2013, 08:19

If you have lots of nested groups that have duplicates try this one-liner, copy+paste+<enter> in the Ruby Console - every group in the model is made unique...

Sketchup.active_model.definitions.each{|d|(d.instances.each{|i|i.make_unique})if d.group? && d.instances[1]}

solid-wood · 3 Sept 2013, 23:35

Hi Fredo,

Why don't I get the same functions in Mac 10.6 for "Streching" target?
Can't move the fixed point...windows is what I am trying to strech.
Only moves in the center glass, the L&R glas stayes the same. Doesn't matter where I put the "X"
Please help. Thanks
Solid-Wood

solid-wood · 3 Sept 2013, 23:52

Hi Fredo,

Just got it...From the new video, thanks. Works like a charm.
Wonderful!
SW

guanjin · 13 Sept 2013, 15:32

Hello Fredo6

In sketchup2013 normal display Chinese language, Chinese language does not show sketchup8M5 is still in English.
I LibFredo6 5.2 or higher

Thank you

fredo6 · 13 Sept 2013, 17:32

@guanjin said:

Hello Fredo6

In sketchup2013 normal display Chinese language, Chinese language does not show sketchup8M5 is still in English.
I LibFredo6 5.2 or higher

Thank you

I know and this is true for all languages.

This is related to the change of naming conventions. I need to republish.

In the meantime, just replace __Module = FredoScale by __Module = F6_FredoScale in the file FredoScale_ZH.lang

Fredo

guanjin · 14 Sept 2013, 06:49

@fredo6 said:

@guanjin said:

Hello Fredo6

In sketchup2013 normal display Chinese language, Chinese language does not show sketchup8M5 is still in English.
I LibFredo6 5.2 or higher

Thank you

I know and this is true for all languages.

This is related to the change of naming conventions. I need to republish.

In the meantime, just replace __Module = FredoScale by __Module = F6_FredoScale in the file FredoScale_ZH.lang

Fredo

Thank you, waiting for your new release!

fredo6 · 15 Sept 2013, 11:59

NEW RELEASE: FredoScale v2.5b - 15 Sep 13

FredoScale 2.5b fixes a bug preventing language translations to load.

FredoScale 2.5 requires LibFredo6 5.2 or higher.

See main post of this thread for Download.

Fredo

dedmin · 15 Sept 2013, 12:17

@fredo6 said:

NEW RELEASE: FredoScale v2.5b - 15 Sep 13

FredoScale 2.5b fixes a bug preventing language translations to load.

FredoScale 2.5 requires LibFredo6 5.2 or higher.

See main post of this thread for Download.

Fredo

After the update:

fredo6 · 15 Sept 2013, 13:03

@dedmin

Thanks very much. I updated the post and Plugin Store today at 15h.

Fredo

dedmin · 15 Sept 2013, 13:23

BTW, did You see this:
http://sketchucation.com/forums/viewtopic.php?f=323&t=46473&start=90
http://sketchucation.com/forums/viewtopic.php?f=323&t=54176

fredo6 · 15 Sept 2013, 14:46

@dedmin said:

:thumb:
BTW, did You see this:
http://sketchucation.com/forums/viewtopic.php?f=323&t=46473&start=90
http://sketchucation.com/forums/viewtopic.php?f=323&t=54176

For Curvizard Edge Prop, I had found the bug actually but forgot to republish
For BezierSpline, I have to investigate. This is old code and the tooltip may not reflect the correct alignment

Fredo

guanjin · 15 Sept 2013, 15:59

Thank timely updates, thank you

Lana · 25 Sept 2013, 10:04

Thank you, thank you, thank you....is very good.