[Plugin][$] Curvizard - v2.5a - 01 Apr 24

Oxer · 29 Nov 2012, 15:03

Thanks Fredo for the update it's very useful !!
The problem with the translation continues and missing some translations. I have done the Spanish translation (Spain) but how i say you there are missing translations.

Thanks again Fredo.

Spanish Language (Spain)

fredo6 · 29 Nov 2012, 17:04

@oxer said:

The problem with the translation continues and missing some translations. I have done the Spanish translation (Spain) but how i say you there are missing translations.

Oxer,

Thanks very much for the update.
Note that part of the transaltion is in LibFredo

The issue with the translation effective in the Luancher and tooltips of the main icons will be fixed in release 1.1b.

Fredo

Oxer · 29 Nov 2012, 18:23

Thanks Fredo!!

fredo6 · 29 Nov 2012, 18:24

NEW RELEASE: Curvizard v1.1c - 29 Nov 12

Minor release over 1.1a:

fix a problem in Cleanup Contour which cannot be launched
fix to a problem for translation for the Quick Launcher
Integration of Chinese translation (guanjin)
Update to the Spanish (Spain) translation (Oxer)

See main post of this thread for Download.

Fredo

Arc · 30 Nov 2012, 10:22

Translation into Chinese...
Chinese language

smicha · 1 Dec 2012, 13:26

Fredo, You are genius!!! Thank you so much for fantastic update.

victor hugo · 7 Dec 2012, 08:17

Pretty useful plugin!!!

I've downloaded the update 1.1c and installed per instructions and when I go to "Fredo tools" to "Check the Plugin Update"; Curvizard still shows in pink/red. I re-downloaded the file and it keeps saying I need to do update!!!??

Thanks.

cotty · 7 Dec 2012, 08:20

1.1c or 1.1d?

victor hugo · 7 Dec 2012, 08:29

I had 1.1c and just did 1.1d and the attched is what is showing

Thanks.

cotty · 7 Dec 2012, 09:34

You are right, it seems that in the 1.1d file "Curvizard.plugin" the version is still 1.1c ...

guanjin · 7 Dec 2012, 16:59

@cotty said:

You are right, it seems that in the 1.1d file "Curvizard.plugin" the version is still 1.1c ...

I am also, but does not affect use.

small08 · 7 Dec 2012, 23:41

Amazing work Fredo, Thank-you!

matt.gordon320 · 10 Dec 2012, 21:59

Hi Fredo,

I was wondering if you might be able to take a look at my office's model to see what might be causing the error(s) I'm getting? I've attached both the model and the error report.

Thanks!

Matt

Master Topo Clean ERROR.skp

Ruby Error - Curvizard#simplify_curve - 10-Dec-12 13_43_35.txt

TIG · 10 Dec 2012, 22:18

Matt

What are you trying to do when you get the error message ?
Your post is too scant.

matt.gordon320 · 10 Dec 2012, 22:40

My apologies, my message is absolutely lacking in any detail

I've brought in a dwg containing topographic information from a civil consultants's office, and I'm trying to use Curvizard to simplify the contours. When I do, the interface of SketchUp pauses for a second, then comes up with an error message window containing the information in the attached text report. I can't quite figure out what the error is, or whether it's something that I introduced through cleaning up the DWG, or whether it's something that is just lost in translation from AutoCAD => SketchUp.

Hope that's better

Thanks!

Matt

TIG · 10 Dec 2012, 22:59

There are lots of 'gaps' in your contours etc which are probably causing the issues.
You could always draw a few lines in to heal the critical ones before doing anything else...

I ran your contour-lines [without any other processing] through the Sandbox Tools > From Contours.
After some processing it made a complex terrain mesh...I assume this is something like you hoped for ? Perhaps you need to choose your tools... "When the only tool you have is a hammer, everything starts to look like a nail..."

fredo6 · 10 Dec 2012, 23:07

The erreor 'reference to deleted vertex' may occur in some situations and not easy to fix.

I suggest you use the mode "Erase and Create" rather than deform.

Were you processing all (or many) contours at once?

Fredo

matt.gordon320 · 10 Dec 2012, 23:18

@tig said:

There are lots of 'gaps' in your contours etc which are probably causing the issues.
You could always draw a few lines in to heal the critical ones before doing anything else...

I ran your contour-lines [without any other processing] through the Sandbox Tools > From Contours.
After some processing it made a complex terrain mesh...[attachment=0:28k6bpaf]Capture.PNG[/attachment:28k6bpaf]I assume this is something like you hoped for ? Perhaps you need to choose your tools... "When the only tool you have is a hammer, everything starts to look like a nail..."

Yes, I tried running the "From Contours", and it worked fine, I was just trying to test the difference in file size that Fredo's tool might save. I'm pretty much the only one in the office who bothers to try to keep file size down, so I figured I'd try it.

@unknownuser said:

The erreor 'reference to deleted vertex' may occur in some situations and not easy to fix.

I suggest you use the mode "Erase and Create" rather than deform.

Were you processing all (or many) contours at once?

Fredo

I'll try to see if "Erase and Create" will work for me. I was running all of them at once. It's my first time using the tool so I was more just testing than anything. Is running all of them at once a terrible idea, like I'm currently realizing it might be?

marszbrowse · 12 Dec 2012, 19:10

Hi There,

First of all thanks for all your good work!

I've installed your plugin(s) and all worked like a charm. Unfortunately I've been kind of a dumb ass by moving some of the files out of the Curvizard folder. Tought they were in the wrong folder at the time. Since then on every load, SU keeps reporting missing *.rb files from the loader. Even with all the Curvizard files removed and all so with them installed (and working) What can I do, there is no info about this in the manual.

TIA

Marsz

TIG · 12 Dec 2012, 19:26

@marszbrowse said:

Hi There,

First of all thanks for all your good work!

I've installed your plugin(s) and all worked like a charm. Unfortunately I've been kind of a dumb ass by moving some of the files out of the Curvizard folder. Thought they were in the wrong folder at the time. Since then on every load, SU keeps reporting missing *.rb files from the loader. Even with all the Curvizard files removed and all so with them installed (and working) What can I do, there is no info about this in the manual.

TIA

Marsz
I'm afraid tools' authors can't make accommodations for every user's stupidity...
Even some full error messages from you would be helpful - rather than your précis...
Re-get all of the needed files/subfolders again.
Now look at what is in these.
Find all matching files/subfolders inside the Plugins folder and remove them.
Now reinstall the newly got files correctly...

There are clear instructions about where the files/subfolders and helpers etc go, reread that and make sure you know what to do...