[Plugin] UVTools 0.2 Pro (Beta) (Updated for SU6)

snowdogg · 13 Oct 2011, 16:34

@whaat said:

@snowdogg said:

Maybe be the wrong question, but would this work on Sketchup7? I keep getting bugsplat when I use it.

Thanks!

Do you have a material with texture applied to the selected faces before you activate the tool?

Also - do the material exist in the model - or is it picked from the Material Library?

The material is from the material library as well.

thomthom · 13 Oct 2011, 16:41

@snowdogg said:

@thomthom said:

@whaat said:

@snowdogg said:

Maybe be the wrong question, but would this work on Sketchup7? I keep getting bugsplat when I use it.

Thanks!

Do you have a material with texture applied to the selected faces before you activate the tool?

Also - do the material exist in the model - or is it picked from the Material Library?

The material is from the material library as well.

Add the material to the model first - so that it's part of the In Model list. The SketchUp Ruby API will cause a crash if it applies material picked from the Material Libarary without the material existing in the model yet.

snowdogg · 13 Oct 2011, 17:16

@thomthom said:

@snowdogg said:

@thomthom said:

@whaat said:

@snowdogg said:

Maybe be the wrong question, but would this work on Sketchup7? I keep getting bugsplat when I use it.

Thanks!

Do you have a material with texture applied to the selected faces before you activate the tool?

Also - do the material exist in the model - or is it picked from the Material Library?

The material is from the material library as well.

Add the material to the model first - so that it's part of the In Model list. The SketchUp Ruby API will cause a crash if it applies material picked from the Material Libarary without the material existing in the model yet.

Thanks!Unfortunately I still crashed. I also ran this in SU6, and arrived with the same problem, a bug splat. Do you believe it as to do with the dome itself? It is rather simple, but I am clueless as to why I am bugsplatting.

Rich O Brien · 13 Oct 2011, 17:34

Try it on a Dome with 50 edges to see if it's the edge count. Or share it here so we can all play.

snowdogg · 13 Oct 2011, 17:59

@unknownuser said:

Try it on a Dome with 50 edges to see if it's the edge count. Or share it here so we can all play.

No luck, still a bug splat. Maybe its a image issue? But then again, the image texture is from Sketchup itself.

snowdogg · 13 Oct 2011, 18:07

24'D Dome
@unknownuser said:

Try it on a Dome with 50 edges to see if it's the edge count. Or share it here so we can all play.

Opps, forgot to attach it. Yes, I would appreciate if you can see if there are any problems. I am just trying to add the tile roof texture (in Sketchup)on the top side only.

snowdogg · 19 Oct 2011, 14:18

@snowdogg said:

[attachment=0:ld8wq8vo]24DIADOME.skp[/attachment:ld8wq8vo]
@unknownuser said:

Try it on a Dome with 50 edges to see if it's the edge count. Or share it here so we can all play.

Opps, forgot to attach it. Yes, I would appreciate if you can see if there are any problems. I am just trying to add the tile roof texture (in Sketchup)on the top side only.

Anyone had any thoughts/solutions about this? Still having problems. Thanks!

martinvz · 21 Oct 2011, 20:53

Great plugin.

Im not sure if the author still updates the plugin, but I found out it did not import in blender.
This is because of a small typo in the plugin file at line 374.
Fix the typo and blender will import without a problem.

snowdogg · 25 Oct 2011, 14:06

Quick question. Does this plug-in conflict with other plug ins? I think I found out why I was bug splatting because I have a version of SketchUp (version without many plug ins (my other versions have no conflicts amongst themselves, and are up to date). If someone knows, please advise me. I really like this plug in and I would like to use it on 7.

Rich O Brien · 25 Oct 2011, 14:54

Firstly, here's your dome mapped without any problems happening. Sorry for late response.

Secondly, this is the first reported issue with UV Tools Pro so I imagine the conflict lies elsewhere.

Try removing all plugins except this and test to see if it happens.

TIG · 25 Oct 2011, 14:59

Another issue is you modeled the dome completely inside out with all back-faces outwards.
Reverse one and Orient to correct it before trying complex UV mapping tricks - which are intended for front face materials...

snowdogg · 25 Oct 2011, 15:28

@unknownuser said:

Firstly, here's your dome mapped without any problems happening. Sorry for late response.

[attachment=0:xndjv04s]UV_Example.png[/attachment:xndjv04s]

Secondly, this is the first reported issue with UV Tools Pro so I imagine the conflict lies elsewhere.

Try removing all plugins except this and test to see if it happens.

Thanks so much! Yes, I am going through the plugins now and now, I think I know the problem. Not purging through LIBFREDO6 purge feature. And also, not deleting the older versions! I probably got sidetracked at the time, and I didn't follow through the instructions. I am glad I can now use this plugin, its so darn helpful!

Rich O Brien · 25 Oct 2011, 15:32

Good.

From experience, I know installing all these glorious plugins is a must but if when reorganizing you say 'I don't use THAT often' then it needs to go.

It's easier troubleshoot and also it has a calming influence.

martinvz · 4 Nov 2011, 11:06

I Guess Whaat does not update this plugin anymore.
So here is a fixed version, this will solve the problem with Blender.

Tested with blender 8, LithUnwrap and Blender.

Version 0.3 works with Blender en SU8

derei · 4 Nov 2011, 11:21

@martinvz said:

I Guess Whaat does not update this plugin anymore.
So here is a fixed version, this will solve the problem with Blender.

Tested with blender 8, LithUnwrap and Blender.

[attachment=0:1zrp5ppi]UVtools.rb[/attachment:1zrp5ppi]

What exactly is fixed?

Rich O Brien · 4 Nov 2011, 11:24

@unknownuser said:

What exactly is fixed?

http://forums.sketchucation.com/viewtopic.php?p=361512#p361512

derei · 4 Nov 2011, 11:26

@unknownuser said:

@unknownuser said:

What exactly is fixed?

http://forums.sketchucation.com/viewtopic.php?p=361512#p361512

LOL ! i was looking around about "the glitch that needed fix", the page before, two pages before...but somehow I missed that

thomthom · 4 Nov 2011, 11:54

@martinvz said:

I Guess Whaat does not update this plugin anymore.
So here is a fixed version, this will solve the problem with Blender.

Tested with blender 8, LithUnwrap and Blender.

[attachment=0:3u0js31c]UVtools.rb[/attachment:3u0js31c]

Did you get permission to redistribute the plugin?

Gaieus · 4 Nov 2011, 12:11

@thomthom said:

@martinvz said:

I Guess Whaat does not update this plugin anymore.
So here is a fixed version, this will solve the problem with Blender.

Tested with blender 8, LithUnwrap and Blender.

[attachment=0:14kr3u5k]UVtools.rb[/attachment:14kr3u5k]

Did you get permission to redistribute the plugin?

Pleae, read the plugin posting guidelines here:
http://forums.sketchucation.com/viewtopic.php?p=204973#p204973

Whaat is alive and active so he may consider incorporating some changes into his plugin but re-posting verions is not good.

Whaat · 4 Nov 2011, 15:12

@martinvz said:

I Guess Whaat does not update this plugin anymore.
So here is a fixed version, this will solve the problem with Blender.

Tested with blender 8, LithUnwrap and Blender.

[attachment=0:12f2k8sk]UVtools.rb[/attachment:12f2k8sk]

I apologize for not updated this plugin. You should be asking permission before you redistribute any plugins. However, I have decided to include your version in the top post of this thread (hmmmm...I guess I'm now redistributing your plugin... ) if you don't mind.

Thanks for providing a fix. I had tested the plugin with Blender before and I thought it worked fine but I guess I was wrong.