[Plugin][$] FredoScale - v3.6a - 01 Apr 24

derei · 22 Jun 2011, 06:19

Excuse me, I noticed some "strange looking buttons on the toolbar image posted by narayan.
I marked them with red in the image, please tell me what are they and where I can find them?

Thank you.

Gaieus · 22 Jun 2011, 06:25

The top left one is Pen tools by Rich:
http://forums.sketchucation.com/viewtopic.php?t=37359

(I don't know the others either)

Rather messy toolbars however.

Lorelalala · 24 Jun 2011, 21:07

Thank you, Fredo!

Tinygrasshopper · 15 Jul 2011, 08:02

Hi!!
First of all : Muchas gracias! Super plugin!
Now... I have somme trouble with the plugin. Almost everything works fine, but "PlanarShear" and "Radial Bend" give me a bugsplat immediately, no matter the size or the form of the component, even with a single line

I tryed everything i found on the forum, i updated the plugin, i updated de Fredo Lybrary, etc.

The bugsplat gives me : SketchUpP2JD3HV5.dmp, OG5T2D56.xml, SketchupUndo0.log
I work on Windows XP, SU 7.0.11018, 3Go of Ram, Intel Dual-Core E5300 (I know my PC s***ks, but is not mine, is my firm's).

Any ideas? Thanks in advance!

fredo6 · 17 Jul 2011, 18:03

@tinygrasshopper said:

Hi!!
First of all : Muchas gracias! Super plugin!
Now... I have somme trouble with the plugin. Almost everything works fine, but "PlanarShear" and "Radial Bend" give me a bugsplat immediately, no matter the size or the form of the component, even with a single line

I tryed everything i found on the forum, i updated the plugin, i updated de Fredo Lybrary, etc.

The bugsplat gives me : SketchUpP2JD3HV5.dmp, OG5T2D56.xml, SketchupUndo0.log
I work on Windows XP, SU 7.0.11018, 3Go of Ram, Intel Dual-Core E5300 (I know my PC s***ks, but is not mine, is my firm's).

Any ideas? Thanks in advance!

When do you get the blug splat

when you select and start FredoScale
When you generate the transformation.
Also, could you open the Ruby console, to see if you see something displayed just before you get the bug splat.
Thanks to be more accurate on the conditions

Fredo

Rich O Brien · 24 Jul 2011, 13:54

Thanks Fredo

thomthom · 24 Jul 2011, 14:03

That is a really nice feature addon.

jorge2011 · 24 Jul 2011, 15:12

Thank you very much Mr. Fred for this new update. It is very good.

If possible, the next update adds the option to change the color and size of the nodes in the boxes?

and switch on or off the visualization of the axes

thank you very much

fredo6 · 24 Jul 2011, 20:47

NEW RELEASE: FredoScale 2.2a- 24 Jul 11

This release integrate a feature of Collapsing handles when dimensions are small on screen.

This was suggested in a request by Cunningham.

Kyyu also produced a plugin "Simple Scale Tool Handles" for the standard Scale tool.

The principle is to hide the handles on corners and edges when the dimension of a side appears too small on the screen (like this is usually the case for boards or for timbers). However, when you zoom in, all handles will progressively reappear.

By default a dimension is considered "small on screen" if its size appears to be under 30 pixels in the current view. You can change this value in the Default Parameters dialog box. Note that entering a value of 0 will disable the feature, i.e. all handles will always appear.

Note also that as of this release, the Dice option (activated by F4) is active by default

Please see main post for download

Fredo

derei · 28 Jul 2011, 22:28

I have two major problems with the plugin: I can't see the new scaling icon on toolbar and I could not find it on settings webdialog.
Second problem is shown in the images below. It seems that stretching is made accordingly with global axis, not component's orientation.
I have the last plugin and LibFredo3.7

Rich O Brien · 28 Jul 2011, 22:33

Hi Fredo,

I notice that this latest release isn't found via the 'Check for Update' feature within SU?

fredo6 · 29 Jul 2011, 07:37

@unknownuser said:

I have two major problems with the plugin: I can't see the new scaling icon on toolbar and I could not find it on settings webdialog.
Second problem is shown in the images below. It seems that stretching is made accordingly with global axis, not component's orientation.
I have the last plugin and LibFredo3.7

There is no new scaling icon
you need first to orientate the scaling box. Just click on the long edge of your component.

Fredo

fredo6 · 29 Jul 2011, 07:38

@unknownuser said:

Hi Fredo,

I notice that this latest release isn't found via the 'Check for Update' feature within SU?

Rich,

You are right. Thanks.
I just published the notice for the version 2.2a.

Fred

derei · 29 Jul 2011, 08:06

@unknownuser said:

There is no new scaling icon

This post mislead me http://forums.sketchucation.com/viewtopic.php?f=323&t=17948&p=344976#p343978 In the image are two scaling icons on toolbar

@unknownuser said:

you need first to orientate the scaling box. Just click on the long edge of your component.

Fredo

Strange, I haven't done that before... is it a new feature? Also it is possible that I never was into position to stretch rotated components
Thanks for the tip. What about components that don't have edges collinear with axis orientation, how do we orientate the scaling box then?

Rich O Brien · 29 Jul 2011, 08:21

@dereeei

You can have extra icons that are 'scale to target' enabled. Check the documentation to see what they care.

@Fredo

Your first post still has the January version as the current download version under the download icon. The file is correct but the text suggests an older version.

fredo6 · 29 Jul 2011, 09:52

@unknownuser said:

There is no new scaling icon

Just go to Fredo6 Collection > FredoScale > Default Parameters.... Scroll down the dialog box and you'll find check boxes to enable additional icons. Note that whether icons are visible or not, the menu entry for all commands is always available. The icons you talk about are Scale to Target and Stretch to Target

@unknownuser said:

What about components that don't have edges collinear with axis orientation, how do we orientate the scaling box then?

First you can orientate the box by clicking on any line or face in the model. The line or face does not have to be in the component.
Second, you can also orientate the box along the local axes of the component. Just use the Arrows.
All details are explained in the documentation which is available from within Sketchup (Fredo6 Collection > FredoScale > Documentation...)

Fredo

paddyclown · 5 Aug 2011, 12:46

Hi, this is a lovely pugin, however there appears to be an issue concerning the context menu in other tools becoming greyed-out when it is enabled... http://sketchuptips.blogspot.com/2010/05/sketchup-context-menu-greyed-out.html
I don't fully understand the explanation at this above post link, but following the advice to disable FredoScale seems to fix the greyed out context menu...
Is there a fix in the pipeline ?
Anyway, it's a minor thing once one knows, & thanks for the good work.

Jim · 5 Aug 2011, 12:58

Hi Patrick,

That (my) blog post is over a year old, and I thought FredoScale had been updated to address the problem. I can not find a reference to it being fixed. Fredo will need to clarify.

paddyclown · 5 Aug 2011, 13:21

Hmm, thanks & meantime I found this : http://forums.sketchucation.com/viewtopic.php?t=29032
which seems to sort the problem for me... so heh makes me happy as I have tons of things loaded that I use...
Hope one day Google gets 'round to making a loader/unloader for plugins that's easy to use...

Anyhow, thanks to all you clever people who know how to ruby script !

meeta · 5 Aug 2011, 17:31

A big thank you. This plugin will be saving me hours and hours of work!