[Plugin] Greeble 2 released! (Updated August 31st, 2009)

Chris Fullmer · 17 Jun 2011, 15:10

Can you upload a simple model that you are trying to use it on that is not working? And also possibly open the Ruby Console (from the Window menu) and then run the plugin and see if it displays any errors there. Please paste those errors here.

This script does not always behave well...

Bertier · 17 Jun 2011, 17:07

set to meters as Pilou suggested

trying to greeble a simple 100 x 100 square :

#Sketchup::Face:0x24e2b624 did not offset:
Error: #<NoMethodError: undefined method normal' for nil:NilClass> C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250:in greeble'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:223:in each' C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:223:in greeble'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:294
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250:in `call'
C:/Program Files/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250

TIG · 17 Jun 2011, 17:24

Bertier

The error in line #250 is when it tries to get a normal new_vector = cl_newface.normal and the face cl_newface doesn't exist.
It is made by offsetting e which is one of clface[s] around lines #236 et al...
Not sure what's causing it... Chris?

Bertier · 17 Jun 2011, 17:29

:0

sound chinese to me...

Chris Fullmer · 17 Jun 2011, 19:47

hmm, somehow it is passing a bad vector parameter to the offset script I think.

An example model would be helpful. Could you upload a small test model that is not working right? Thanks!

Chris

pilou · 17 Jun 2011, 21:09

Avec comme unité les mètres
Essaie avec ces valeur avec une figure qui fait au minimum 100 m par 100 par 100 m !
Pour avoir une extrusion continue
Il faut répondre oui à la question pour faire un "group" de la boite de dialogue une fois le plug lancé
Exploser le groupe résultat et recommencer

pilou · 17 Jun 2011, 22:32

About the repetition from the last action : now we must make that
Select faces

@unknownuser said:

begin
Grebble with "Yes I want grouping the all topmost faces"

else any faces will be not selected for a next grebbling
Result
Explode group = new topmost faces selected
goto begin

it's possible but a little painful
Vieria Da Silva inspiration (cool gallery zoom possible)

Another thing: using the new plug of Selection aera by Sdmitch on a complex Greeble volume
Some faces are selected as wished, but the Greebble makes nothing
Have you some tests inside Grebble for exit if some faces are in particular positions (overlapsed) ?
(make nothing also with normal selection

Pout · 16 Sept 2011, 06:45

Hey Chris, haven't look at it but i read in the previous version of this plugin that you planned on integrating a cancel button to cancel script execution.
Did you find a solution for this?

Thx

Chris Fullmer · 16 Sept 2011, 14:27

No, this was one of the first scripts I ever wrote and I probably said that before I knew how how hard that can be to do. I really never even tried to do it though.

El_Sexto · 3 Oct 2011, 11:37

Hi guys ! somebody have the solution for the bertier problem plz ?

TIG · 3 Oct 2011, 12:52

Bertier never posted his problem SKP or anything further to help us, so it went no further...
If you are experiencing similar problems then please post the full error messages from the Ruby Console etc, and a copy of a SKP that displays this aberrant behavior...

El_Sexto · 4 Oct 2011, 13:45

Ok

Ruby Message : #Sketchup::Face:0xcc62710 did not offset:
Error: #<NoMethodError: undefined method normal' for nil:NilClass> C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250:in greeble'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:223:in each' C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:223:in greeble'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:294
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250:in `call'
C:/Program Files (x86)/Google/Google SketchUp 8/Plugins/clf_greeble_2.rb:250

I used Sketchup 8, meters dimension and i use the Pilou's setting : 10,-10 ... and the Default setting, 1',-1'... and i have the same result : Anything !

Thanx.

model.skp

Chris Fullmer · 4 Oct 2011, 18:59

What did you type to make it offset? I think it is does not work very well with meters, and might not work at all with comma's as decimal place deliminators. Meaning 1,2 should be written as 1.2 if you are from a part of the world that uses a comma as a decimal place.

pilou · 4 Oct 2011, 19:55

No problem with your model Model.SKP! (in V8) Works like a charm! (I am on PC)
Greeble buildings are just in the other side
Are you sure you have also in the plugins folder
Progress bar and Offset?

El_Sexto · 6 Oct 2011, 12:59

Thanx guys for your answer !

Pilou : u can see the folder, offset and progressbar are here.

Chris :in this model i have not deliminators; see the attachment, 10,10,-2,-2,0,100 and i have also use the default and Pilou values

masterplan · 6 Oct 2011, 15:37

it doesnt work for me.

Gaieus · 6 Oct 2011, 15:44

Masterplan (welcome, BTW) please, be more specific. What are you doing exactly and what do you expect? Is there any error message? Maybe attach a file that "does not work for you" or something.

For a sentence "it does not work for me" one can only answer "well that sucks". Give as much info as possible otherwise you will be left hanging...

pilou · 6 Oct 2011, 16:09

@ El-sexto
That is very mysterious
What can I say? That works for me with your model with your version of SU
Does this version the last one ?
Have you try with a previous version of SU ?

El_Sexto · 6 Oct 2011, 16:14

Yes I tried with sketchup 7 - Maybe i should try with the version 1 ...

Chris Fullmer · 6 Oct 2011, 17:56

Do you get any better results if you lift the geometry off the groundplane?

Just to verify (again), but you do have the most recent greeble and offset scripts from http://www.smustard.com?

What language is your Operating System set to?

I'll see if I can test this later tonight, sorry its not working!

Chris