[Plugin] Shape Bender Beta

TIG · 13 Sept 2010, 11:51

The error message seems to relate to a missing 'menu' definition, that then can't have an 'item' added to it.
Can you type the following in turn into the Ruby Console, and post the results...

$submenu
then
$clf_tools_menu
then
$clf_youtube_menu

This should then tell us what's missing/malfunctioning...

Chris Fullmer · 13 Sept 2010, 15:51

@atelierpaar said:

Hi Chris,
I just came across your shapebender-tool.
It works great - so I thought i might try If the things would also work on Reverse - Why this ?
Well, I got a historic church here that has curved Walls with curved Windows.
In order to renew the Windows frameconstruction, I am planing to take a 3D Laserscan of the exsisting construction, than reconstruct the Windowframing using the point-Cloud. Once that is done, It would be of great help to stretch the curved Geometry onto a Flat plane in order to produce the Frameparts by use of a Lasercutter.

Do You think that would be possible?
Uli

Hi Uli, that would be interseting, but at this point, the script does not do that. I'm not sure if there is some way you could make it do that with by bending to an arc that is exactly opposite of the original curve. That might be possible. But for now, the script was not built to do that natively. Sorry, but good luck.

Chris

Chris Fullmer · 13 Sept 2010, 15:59

@Charly, that is odd. Do what TIG shows there. You might even just try re-downloading and installing it again. Perhaps the file itself got messed up.

charly2008 · 13 Sept 2010, 19:12

Hi Chris, hi TIG,

I have only just come home. Here's the result:

TIG · 13 Sept 2010, 19:31

So it's returning nil because you don't have RickW's Smustard menu added - OK and shouldn't cause aprobelm...
You do have the clf's tools menu loaded - Good.
BUT you don't have clf's youtube menu loading... Strange...
This could be the problem - it loads from clf's component_stringer / camera_recorder / shape_bender / voodoo_importer
Try checking you have those...

Chris

charly2008 · 13 Sept 2010, 19:47

I'm a little bit confused. That are all the Plugins i have in a PDF-File.

Charly

DirPrintOK Document 8 Seite(n).pdf

TIG · 13 Sept 2010, 21:08

So... Chris's tools fall over because one of them hasn't already loaded 'some other menu' when it thinks it has...
Here's a [possible] simple fix... put it into the correct sub-folder...
clf_shape_bender.rb
Chris can sort it 'properly' later...

charly2008 · 13 Sept 2010, 21:15

Many thanks TIG. I tried the Shape Bender plugin in SketchUp 8 there it works fine. and now with your update it works again in Sketchup 7.

Charly

Chris Fullmer · 13 Sept 2010, 22:05

Hey TIG, thanks for looking into it. I am without a computer at home for now, so I'm mostly useless. But what was the problem you found? I was able to load shape bender just fine without having any of my other plugins loaded. Did I mess something up in my overly complicated menu system?

TIG · 13 Sept 2010, 22:29

Chris
Wait till you get a proper link in to check what's up... I think it's the way that some of your scripts check if a Plugin is loaded already... I moved the confirmations in that file so each of them is immediately after its the first-run check and its seems to work OK then...
You have over-complicated your menu checking somewhat.... but - hey -join-the-club
It seems to depend on which of your scripts a user has loading... and of course it shouldn't
It's probably an easy fix BUT it probably affects several of your scripts

mariocha · 16 Sept 2010, 21:10

Huh ....
The shape in the attached file makes Shape Bender crash SU.
I tried it several times.
(The line I want to use is hard to see, on the red axis)

branch-o.skp

Dave R · 16 Sept 2010, 22:03

Bug Splat for me, too. Even after I moved the straight line so it lies on the red axis. It works with a simple long, skinny box. Perhaps there's too much geometry in the branch?

jeff hammond · 17 Sept 2010, 00:16

(mac)
works in SU7.. crashes with 8

d12dozr · 17 Sept 2010, 02:15

Worked fine for me, the only thing I did was move the branch up a few inches so I could see the horizontal line. I didn't get the green preview wires like I usually do though.

File is attached.

branch-o.skp

mariocha · 17 Sept 2010, 02:16

Great ! Good idea.
I will try it in v7.
thx a lot.
I guess a small update of the plugin will be needed.

jim smith · 17 Sept 2010, 02:44

I haven't run through all the thread since 8 came on the scene, but it doen't work on my laptop with 8. V7.1, it works just fine. Attached is a screen shot of a simple bend, it seems to start and then stalls at 5%. On my V7.1, it bends in a few seconds. I don't get any error message box on startup or when I start the shape bender.

Chris Fullmer · 17 Sept 2010, 04:38

Looks like I need to poke aroud in this plugin again to get it v8 compatible. I'll see what I can do.

Chris

gullfo · 17 Sept 2010, 13:10

it's working OK for me on SU8 (on fairly complex shapes), but previously on SU7 i had a similar problem and i cleaned things up and removed a number of older plugins and then everything worked OK. i suggest checking to see if you can identify a plugin which may be problematic.

mariocha · 17 Sept 2010, 16:27

Hum... I will check.
In fact yes, on other shapes it worked ok in 8.
Won't be easy to find a non-constant problem.

cheriyan · 20 Sept 2010, 07:55

Thanks for this plugins