[Plugin] Make Fur v.2.1.0(20140323)

Stu

Ive been using fur for a while ...with good results, and just loving it!!

However I've struck a problem as in the attached....it seems to be the cut off angle that is upsetting the geometry.....if I try a square or rectangular plane it behaves normally.

tak2hata

@paulower said:

This is the translation of Make Fur to languaje Portuguese-BR (Brazil) by me.

Tak2hata would be possible in the next version, you increase the size of the buttons "Assign Material to" and "Get Stuff From." Is that in Portuguese, we have more characters in the translation and some letters may not appear on the icon (button).

You can see who is running smoothly letters with accents and numerical symbols.

Thanks paulowr.
I add language list on first thread.
I will increase the size of Buttons in next version.

@stu said:

Ive been using fur for a while ...with good results, and just loving it!!

However I've struck a problem as in the attached....it seems to be the cut off angle that is upsetting the geometry.....if I try a square or rectangular plane it behaves normally.

Hi , Stu.
That happens in small value of "MaxNumber(/Face)" for the faces.
You should increase "MaxNumber(/Face)" enough.

Thanks.

Stu

Thanks Tak2hata, I boosted it up to 12,000!! and its fine now

tomot

Tak2hata I was wondering if you had considered including a random fur height function? I'm currently creating a random height tile/block/city generator... which is not finished yet.
See my RAND code snippet below.

if( $type == "Random + " )  
    
    group=entities.add_group
    entities=group.entities 
  
    1.upto($vpanes) do |i|
      x = ($vtile*i)+(i*$space)  
      1.upto($hpanes) do |j|
	    y = ($htile*j)+(j*$space) 
        
	o = $pt3.offset($hVec, y - $space).offset($vVec, x - $space)
    pt1 = o.offset($hVec, -$htile)
	pt2 = o.offset($vVec, -$vtile)
	pt3 = pt1.offset($vVec, -$vtile)
	#entities.add_cpoint o
	#entities.add_cpoint pt1
	#entities.add_cpoint pt2
	#entities.add_cpoint pt3
    face = entities.add_face o, pt1, pt3, pt2
    face.pushpull -($tthick+rand(20))
      end
    end
end #if

cheers!

tak2hata

Hi,all.
I update this to version1.4b.

@tomot said:

Tak2hata I was wondering if you had considered including a random fur height function? I'm currently creating a random height tile/block/city generator... which is not finished yet.
See my RAND code snippet below.

if( $type == "Random + " )  
>     
>     group=entities.add_group
>     entities=group.entities 
>   
>     1.upto($vpanes) do |i|
>       x = ($vtile*i)+(i*$space)  
>       1.upto($hpanes) do |j|
> 	    y = ($htile*j)+(j*$space) 
>         
> 	o = $pt3.offset($hVec, y - $space).offset($vVec, x - $space)
>     pt1 = o.offset($hVec, -$htile)
> 	pt2 = o.offset($vVec, -$vtile)
> 	pt3 = pt1.offset($vVec, -$vtile)
> 	#entities.add_cpoint o
> 	#entities.add_cpoint pt1
> 	#entities.add_cpoint pt2
> 	#entities.add_cpoint pt3
>     face = entities.add_face o, pt1, pt3, pt2
>     face.pushpull -($tthick+rand(20))
>       end
>     end
> end #if

cheers!

Thanks tomot.
But this plugin created preset file.
If I add new parameter, compatible with the old one is difficult for me.
If you want to use random size to component instance, please use crowd(webdialog).
and change value of "size jitter" as you like.

Thanks.

Mauhaus

Hi guys,
I lost my dwg-import option after installing the plugin. Any ideas why this happened?

/Thomas

Gaieus

Hi Thomas,

re you sure you did not upgrade from SketchUp 7.0 to 7.1 (free) lately?

Mauhaus

Hi Gaieus

Thanx for replying
Yes, I have been running 7 (7.1.6859) PRO for some time now. The dwg-import option disappeared after installing it. Maybe I didn't install it properly?

/Thomas

SuperSized

In the spirit of the SA World Cup.... nice plugin

Frederik

@mauhaus said:

Yes, I have been running 7 (7.1.6859) PRO for some time now. The dwg-import option disappeared after installing it. Maybe I didn't install it properly?

I'm sure the install was made properly, however, the dwg/dxf import has been excluded from ver. 7.1 and onwards...
You need a seperate plugin...
Please check out the DWG/DXF import plugin for SketchUp 7.1 (Free)...

hebeijianke

A Chinese translation.
Thanks to you all !

fur_lang_cn.txt

Gaieus

@mauhaus said:

Yes, I have been running 7 (7.1.6859) **PRO**for some time now. The dwg-import option disappeared after installing it...

@frederik said:

I'm sure the install was made properly, however, the dwg/dxf import has been excluded from ver. 7.1 and onwards...

That would only be the free version Kim. The pro still has the "native" import option.

As you are not supposed to be able to install the free version on top of the pro, there can indeed be some problem.

However we are going off-topic here so Thomas, after you see my post here, I will split these posts and move the new topic created this way to the SketchUp Discussions > Bug reports subforum.

However you could try to reinstall your SU but really make sure to download the Pro version (again) to install it. Also, for the Mac version there was also a maintenance release after the main release of 7.1. A couple of fixes were made there so best is to go for sure...

frv

TX for the great plugin, I love the idea of the crowedmaker.
But under OSX it does not work, the dialog panel is empty for the crowed option.
Francois

mariocha

@frv said:

....., I love the idea of the crowedmaker.
But under OSX it does not work, the dialog panel is empty for the crowed option.
Francois

Yep, same here. No dialog under MacOX (10.6.3)

Masoncrowell

can someone tell me how i do this on a mac?
i downloaded the file and updated my version of sketchup. the file only shows up in my downloads and i can't open it with sketchup. i also enabled my plugins menu on sketchup and the only option that shows up is a "cost" option. How do i do this?

tak2hata

@mariocha said:

@frv said:

....., I love the idea of the crowedmaker.
But under OSX it does not work, the dialog panel is empty for the crowed option.
Francois

Yep, same here. No dialog under MacOX (10.6.3)

Hi,Francois and Mario.
It is very regrettable.
I will examine way for working on mac.

@masoncrowell said:

can someone tell me how i do this on a mac?
i downloaded the file and updated my version of sketchup. the file only shows up in my downloads and i can't open it with sketchup. i also enabled my plugins menu on sketchup and the only option that shows up is a "cost" option. How do i do this?

This file is compressed by zip.
First, You should extract this file with folder.
It includes
--fur_en.rb
--fur_en(folder include icon images)
and copy created files to plugins folder.
Read here.
http://sketchup.google.com/intl/en/download/rubyscripts.html

Thanks.

ktslambieng

this is this is a new : vietnam translation for fur1.4b
Thanks you for all !

fur_lang_vn14b.txt

frv

TX Tak,
hope you find the time to look into the blanc dialog for crowds.
I love your idea to specialise the furmaker for crowds
Francois

thomthom

That is due to some oddness in Geom::Transformation.scaling which I mentioned earlier.
http://forums.sketchucation.com/viewtopic.php?f=323&t=28092&p=248300#p248300

But tak2hata said later he's swapped to use .scaling(a,a,a) isntead of .scaling(a) - so that should have taken care of it. Unless there is something else that also creates this scenario.

Oli: are you using the latest version?

thomthom

what happened to Oli's post..?