[Plugin] Manifold v2.2

pilou

I have missed this new true gem!

pilou

When I use Manifold I obtain that ok
But When I kill or move the group red repair
I have the original copy with killed internal faces Yes ok , but always segments on the faces!
Does it normal? A simple box with 6 faces must be result ? No clean selection?

TIG

@unknownuser said:

When I use Manifold I obtain that ok
But When I kill or move the group red repair
I have the original copy with killed internal faces Yes ok , but always segments on the faces!
Does it normal? A simple box with 6 faces must be result ? No clean selection?
[attachment=0:2jmg80n7]bug.png[/attachment:2jmg80n7]

This is correct.
The internal faces are removed by any edges they has forming part of the external envelope are kept.
If you want rid of then use one of the tools that removes coplanar edges...
It could seek to remove coplanar edges too ?

TIG

Here's v2.1
http://forums.sketchucation.com/viewtopic.php?p=218691#p218691

It now has the option to remove coplanar edges before triangulation, this will minimize the number of faces -useful if for example internal faces have been removed and their old edges are not needed to keep the external 'manifold' skin intact...

pilou

Cool now we have possibility or not to "clean" the model in the same time

pilou

2 volumes
copy move

for each selected (2 volumes) Intersect Selected
Group

for each "group" apply Manifold
with same answers : Yes for the first question (of course)
and No for the others questions

Curious result is not the same!
Is that normal?

test.skp

driven

@Pilou,

tested your .skp on mac and got two different results? first time I opened SU from your download file, 2nd time I opened it from inside SU, but that was the only thing I changed, something odd??
double check manifold.jpeg

TIG

Manifold has to start somewhere in its checking - the first entity it encounters might not always be the same so you get differing results if there's a big mess...

Manifold was written to do specific job - check that a group is 'manifold' and if not try to fix it - it is so that when you export your model - e.g. to 3D-printer software - it will work. As it says at the start 'give us break' and try and at least offer it a set of geometry you hope might be manifold - it is NOT a boolean tool to merge volumes - it tries to decide which is the face to keep but sometimes removing or healing something changes the form - hence the colored 'report' group.

Before using 'manifold' try manually to get rid of at least a few known internal faces etc [x-ray mode + hide is good for this] - then the processing is quicker and more consistent...

pilou

I well understand
The only curious thing is that it not the same result for 2 similar groups inspected

make.GQ.china

Thank you for your plug-ins!

TIG

Here's v2.2 - updated FR lingvo file [thanks to Didier Bur] and glitches with Tooltips and other strings deBabelizing now sorted...
http://forums.sketchucation.com/viewtopic.php?p=218691#p218691

pdwyer

Does/should this work with SU 8?

I'm not seeing any colours or new models created, even with the downloaded example but the example skp file is v7.

I suspect v8 needs a plugin like this too. If there is some other way to find doubles/duplicates/manifolds etc I'd love to know

Cheers

TIG

@pdwyer said:

Does/should this work with SU 8?

I'm not seeing any colours or new models created, even with the downloaded example but the example skp file is v7.

I suspect v8 needs a plugin like this too. If there is some other way to find doubles/duplicates/manifolds etc I'd love to know

Cheers

In v8 there are 'manifold' functions built in...

pdwyer

Really?

What are they called?

Gaieus

The new solid tools. Outer shell (available in the free version, too), should do (more or less) what manifold plugin would (unless I am completely mistaken as I have never used this plugin yet)

Jim

Solid Tools. The Entity Info window will indicate "Solid Group" when a Group is manifold.

And here's a great plugin for trouble-shooting non-manifold Groups that should be:

Solid Inspector by thomthom

pdwyer

Cheers! I found a tool called solid Inspector which shows some red and orange lines. I'm not 100% sure what the problem is in some cases (although in others it's obvious). I'll see if I can track down where to ask about those tools

Thanks again

thomthom

@pdwyer said:

Cheers! I found a tool called solid Inspector which shows some red and orange lines. I'm not 100% sure what the problem is in some cases (although in others it's obvious). I'll see if I can track down where to ask about those tools

Thanks again

You can ask about Solid Inspector here: http://forums.sketchucation.com/viewtopic.php?f=323&t=30504&p=267832#p267832

IT circles red/orange around edges where there is a hole, or the edge connect to internal faces. In a solid all edges should have two connected faces - if there are more or less it means it's not a solid. These are the areas which the inspector highlights. So check if the faces are connected to internal faces, or if it's a hole. Note that the whole could be very small and you'd have to zoom a lot to see it.

sellberg

Hi!

Thanx for creating this awsome plugin! I have been working on converting 3D objects from some GIS application and it has been so difficult, until now, that is.

I just have one small and kind of silly question but please bear with me:
After running Manifold a copy of the selected group is created. Wich one is the fixed one? Are both fixed? The way i interpret what happens right now is that the one created is just a "showcase" of what changes have been made and that it should be removed.

/ KJ

Rich O Brien

@unknownuser said:

It then processes the group, making a modified copy of it set off to
one side.
If it has errors then a nested group is overlaid that has these
errors highlighted - red for removals, green for healing.
This error-group has a 'text-handle' so you can easily select it to
move it away or erase it later...
There is a closing dialog which either tells there were no major
errors [although it might have removed non-face/edge entities or
oriented faces and done some triangulation] or it reports the number
of errors.
If X-ray mode is off it asks you if you want to change to X-ray Mode
to look inside the group to see what has been affected.
On Yes/No the tool closes, with the new 'manifold' group now selected.
Otherwise OK to end, with the new 'manifold' group now selected.

Does this answer your query?