[Plugin] TrueTangents v3.0

jeff hammond · 15 Oct 2009, 03:50

hi TIG

i'm wondering if it's possible to add the following ability to TrueTangents:

or, is there already a way to do this with v1.5 that i'm overlooking? it appears the options in v1.5 are working in similar fashion as each other (all dimensions are locked in place prior to using the tool) and this request would work a bit differently but if you think it's possible, i think it'd be a great addition to the toolset.

thanks much

TIG · 19 Oct 2009, 11:13

Jeff

v1.6 http://forums.sketchucation.com/viewtopic.php?p=160780#p160780

Now includes an extra tool 'tangentialarcs' which does what was asked ? Select a Line and an Arc/circle and useful cpoints and lines are added for you...

It does actually draw the arc for you as there are two possibilities - it makes the cpoints and clines needed and you can easily use the 2D Arc / Circle tool in 3-point mode to make the arc/circle needed...

curro_laca · 19 Oct 2009, 17:26

Thanks, tig. Working like a charm.
Everything you release is really top of the tops.

jeff hammond · 19 Oct 2009, 18:39

Sweet! I'm on a phone right now but I'll try it out a little later.

pilou · 19 Oct 2009, 22:13

That is geometry!

mitcorb · 19 Oct 2009, 22:29

Hmmm. Looks like it's time for me to check this out. Thank you, again, TIG

jeff hammond · 20 Oct 2009, 02:35

oh man, that's great!

i basically have two situations where i need to make the double benders and this fully covers one of those (the one that's much harder for me to figure out manually). Thanks so much for adding this to TrueTangents!

[the other situation is when both arcs are a known radii but i can resolve that one easier.. still, if you think you could add the dialog box etc, that'd be cool too.. surely some other people would like that type of fillet tool in SU, no?]

TIG · 20 Oct 2009, 11:01

v1.7 now available http://forums.sketchucation.com/viewtopic.php?p=160780#p160780
With new filletarc tool to fillet a selected arc/circle to a selected line/cline, to a radius given in a dialog, clines/cpoints for centers/tangent-points etc for the 4 or 8 possible fillets depending on whether or not the line intersects the arc...

jeff hammond · 20 Oct 2009, 18:11

damn! perfect!
thanks a ton TIG

simon le bon · 21 Oct 2009, 19:00

filletarc tool: what a good idea

@unknownuser said:

filletarc
Select an arc/circle and a cline/line (aka guide-line)
Run filletarc

unfortunately, it doesn't appear for me in the plugin menu
(what am I doing wrong?) simon

jeff hammond · 21 Oct 2009, 23:08

@simon le bon said:

I'm a little bit disappointed by the fact that depending on the radius is, the tangent lines cannot join perfectly ( certainly due to segmentation of the circles)

but that's the whole point
the cpoints are placed in the correct place so you can the draw (or redraw) the arcs at the true position. Hence - true tangents

TIG · 22 Oct 2009, 09:26

Here's v1.8 that fixes the missing menu item glitch - there are now 5 !
http://forums.sketchucation.com/viewtopic.php?p=160780#p160780

My latest tool "Fillet Arc [Arc+Line|Cline]" should now appear in the Plugins menu at the end of the rest
At the last moment just before I uploaded v1.7 I changed that item's text to read "Fillet Arc [Arc+Line/Cline]" forgetting that a '/' in a menu name stops it appearing - at least on PCs...
Note that typing filletarc in the Console also runs it...

Sorry for the confusion...

TIG · 22 Oct 2009, 09:27

@simon le bon said:

filletarc tool: what a good idea

@unknownuser said:

filletarc
Select an arc/circle and a cline/line (aka guide-line)
Run filletarc

unfortunately, it doesn't appear for me in the plugin menu
(what am I doing wrong?) simon

There should be a group of 4+1 tools in the Plugins menu with TrueTangents et al the last one is FilletArc... Alternatively select an arc/circle and a line/cline and type filletarc in the Ruby Console - it should work... If not, then there might be a problem with the install...

utiler · 22 Oct 2009, 11:34

Thank you TIG, your generosity is greatly appreciated!!!!

pilou · 22 Oct 2009, 13:52

@Tig
Why not make a submenu?
because I have yet hundred of plugs and a big list screen

And have you somewhere a list of your different Ruby plugs?

TIG · 22 Oct 2009, 15:32

Pilou

Just what I was thinking... It started as one item and grew... I'll make a sub-menu and add the 5 into it in the next release...

jeff hammond · 22 Oct 2009, 16:45

[V1.9 submenu & individual tools are working well on mac]

Bep · 25 Oct 2009, 09:06

folding req.skp

Hallo Tig

I noticed your keep on working to make this plugin perfect.
The problem I would realy like to get solved with this ruby is that when you have got a drawing of an unfolded 3D structure where only faces are field-surveyed it is impossible to accurately fold it to a 3D model.

It would be an addition to your true Tangents Ruby, and the true intersections ruby
this time ,to find the true intersection points of two circles in 3D .

Once these points are found you would have I interference point to rotate the faces to.
And it would be possible to measure the angle of rotation these faces should be rotated .

I hope you wil find time to look into this.

Thanks for all your efforts.

Greetings ,Bep van Malde

jeff hammond · 25 Oct 2009, 21:04

i did around 15 hrs of modeling this weekend and used truetangents 9-10 times..
man, it's waay better doing certain things with this plugin.. way better!
thanks again for this one

TIG · 25 Oct 2009, 22:09

v1.9 now has a sub-menu in Plugins 'Tangent-Tools...' that accesses the 5 tools...

http://forums.sketchucation.com/viewtopic.php?p=160780#p160780