[Plugin][$] FredoScale - v3.6a - 01 Apr 24
-
Hi fredo... I had it working. But it stopped today. It wont show anymore. I tried downloading the 31f today and the link worked, only it is still not working. I dont know what happened. I thought of a different ruby but that was not the cause. It was working on my pc and wanted it on my imac. I got this error that it only worked with 31 and not 30. Tonight i wanted to work with it on the pc but it didnt show up anymore. I just copied the files from the pluggin folder to a mem stick
-
In general, for installation and upgrades, just unzip the files provided (select All and extract, to make sure you transfer the folder hierarchy) and answer YES to any prompt dialog box to replace existing files.
Do not worry with previous versions. By unzipping the files, it will replace the ones that have to be replaced. Also never rename or move yourself the files outside of their folder.
Finally, it may help if you tell me whether you:
- get a message at Sketchup startup
- see the menus and toolbar
- get errors at run time
and anything that may guide me to help you
Fredo
-
well ad first i had this error on the mac that i had to upgrade from 30 > 31. Did that and it worked... aslo upgraded on the pc but it doesnt work now!!! ad first it worked with the libfredo 30e but now it doesnt! so any suggestions any one
i dont see any menu's both of them no freescale and no libfredo settings
-
Maybe you should refer to the following post, which indicates the exact footprint of the plugin in the Sketchup directory.
http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=158341#p158225 -
I am running the most recent version on a pc and all of the tools work except the bend tool....half the time it wont even activate when I click the icon and when it does work, it only rotates the object and doesnt bend it. Any ideas what I could be doing wrong?
-
Hi Fredo - just to let you know, after replacing the file 'FreeScale_Common.rb' the tool stops working
it's not a big deal though - whenever you stumble upon it..
-
@steelers05 said:
I am running the most recent version on a pc and all of the tools work except the bend tool....half the time it wont even activate when I click the icon and when it does work, it only rotates the object and doesnt bend it. Any ideas what I could be doing wrong?
Two remarks
- For the rotation (instead of bend), you need to activate the slicer (toggle F4). This creates intermediate points and make the bending smoother.
- Before you do any transformation, make sure that your current selection is correct. If you move directly from one tool to another one like Bend, then all geometry at model level may not be selected. This is why it's always better to encapsulate the geometry within groups.
Fredo
-
Thanks Fredo.. strange, it doesn't work - tried changing the toolbar name..
it doesn't matter - shall i try to find the separators in the files themselves or would i just waste time?
-
@cadfather said:
Thanks Fredo.. strange, it doesn't work - tried changing the toolbar name..
it doesn't matter - shall i try to find the separators in the files themselves or would i just waste time?
Strange. It works for me. Do you at least see the option in the Default Parameters dialog box?
Please do not change the code. You won't find where the separators are (I am even lost myself).
Fredo
-
sorry Fredo, should have been clearer - the update does remove the separators.. so the toolbar looks great - it just doesn't work! : )
..don't worry about it Fredo, i'll leave it as it is.. i will try and find out if there's some clashing etc.. (Thanks)
-
@cadfather said:
sorry Fredo, should have been clearer - the update does remove the separators.. so the toolbar looks great - it just doesn't work! : )
..don't worry about it Fredo, i'll leave it as it is.. i will try and find out if there's some clashing etc.. (Thanks)
Is it the whole set of tools not working?
Did you try with the version attached in my previous post, just in case?
I'd better know, because I checked that 44 people have downloaded the file. -
@cadfather said:
yes, the whole toolset stops - with both versions,
i also tried with an empty plugins folder as below, same result..
I suggest you then reinstall the standard version 2.0f (and 3.1f for LibFredo6, we never know). I need to investigate.
By the way, when you say 'Stops' what does that mean. For instance, if you open the Ruby console, do you see any message when launching the tools?Fredo
PS: Nice icon for the folders!
-
yes, the whole toolset stops - with both versions,
i also tried with an empty plugins folder as below, same result..
forgot to mention:
xp pro sp3
sketchup 7 pro -
with the clean latest install (i had it but retried it again now) the toolset works - if i change the 'common' file, it stops..
here's the folder icons - i do need some visual clues as to what swims in this folder!
-
I think I found the issue. I have inadvertedly included a statement that only works with another version of LibFredo6.
Here is a version that should work hopefully
Fredo
-
@cadfather said:
Hi Fredo
what are the chances i can remove the separators from the icons toolbar?
Drop the attached file into the FREESCALE_Dir_20 folder.
Then restart Sketchup, set the option in the Default Parameters dialog box, and then restart sketchup again.Fredo
-
@cadfather said:
Hi Fredo - just to let you know, after replacing the file 'FreeScale_Common.rb' the tool stops working
it's not a big deal though - whenever you stumble upon it..
It works for me. Could you redownload it and try again.
Just in case, here is the version I use:By the way, does it do what it is suppose to do, that is remove the separators in the toolbar?
[Edit] See this post http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17948&p=158953#p158953
-
fantastico Fredo - it works!
-
Thank you! It's very useful!
-
NEW VERSION 2.0g NOW RELEASED
IMPORTANT: I decided to change the name of this plugin, as the previous name could create confusion with an existing company and infringe their trademark. Please use now the new name FredoScale when referring to this plugin.This version is identical to the previous one 2.0f, except the possibility to configure the toolbar without separators (a request from CadFather). The option can be selected in the Default Parameter dialog box.
See main post at http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17948&st=0&sk=t&sd=a#p144180
It works with the current LibFredo6 3.1f
Fredo
Advertisement