[Plugin][$] FredoScale - v3.6a - 01 Apr 24

thomthom · 30 Mar 2009, 12:06

@unknownuser said:

The stretch command isn't uniform.

And you can use the "moving Plan" for make it Uniform by part

Still won't be a uniform stretch.

rv1974 · 30 Mar 2009, 12:18

@unknownuser said:

@unknownuser said:

The stretch command isn't uniform.

And you can use the "moving Plan" for make it Uniform by part

Still won't be a uniform stretch.

OK "Uniform" is wrong definition. But what hamper to allwindows in bulding #3 to become the same "win1_3" (if say original window in unstreched building#1 is "win1"?

Dave R · 30 Mar 2009, 12:33

Fredo, thank you. The Bend operation is way cool. It even works on unconnected geometry.

thomthom · 30 Mar 2009, 12:50

@rv1974 said:

OK "Uniform" is wrong definition. But what hamper to allwindows in bulding #3 to become the same "win1_3" (if say original window in unstreched building#1 is "win1"?

That would be nice. Just wondering how easy it is to work out which components remain the same... But if Fredo can solve that I'll make another donation to him.

pibuz · 30 Mar 2009, 12:53

Fredo! Thank you so much for this unbelieveable plugin!
One step closer to 3dsMax

jeff hammond · 30 Mar 2009, 12:57

@xrok1 said:

@unknownuser said:

Just in case nobody else has noticed, there's an html file (freescale.donation.html) in the freescale_dir_20 folder.. you can make a donation via that link.

i would love to see the donation page in english too so i could give you some kudos. please post english donation link, and thankyou very much.

the donation is via paypal so you can go to your language version of that and send to:

fredosix{at}hotmail{dot}com

Ecuadorian · 30 Mar 2009, 13:29

I don't know what they taught you at the École Polytechnique, but they certainly did a good job with you, Fredo!

ken · 30 Mar 2009, 14:18

Fredo

I am still having some problems. If I install FS, Ver. 2 with FS, Ver. 1 installed I get the message below, pic. V1&2. If I removed Ver. 1, than I get the next message, pic. V2 only.

After I click the OK, the script seems to work OK.

Thanks for the script.

Ken

jmmad · 30 Mar 2009, 14:21

@unknownuser said:

@unknownuser said:

jmmad wrote:
I only have one problem with the stretch tool some times when I strech something even a simple geometry SU freezes and does not respond, and i have to restart SU.

Fredo6 wrote:
a) Do you apply it to a selection made of embedded components, with several instances (insinde or outside the selection)?
b) Is this something you can reproduce on a given model (if so, can you post it)

Yes here i post the model
It's a component bench with 1 nested component for the legs that repeats 4 times. I don't have any problems when i stretch the model normally, but when i hit control key to stretch from the center it freezes while I am still stretching the component.

Here i attach a image and the corresponding component

Thxs

Bench_Modern.skp

ken · 30 Mar 2009, 14:21

Fredo

Well it seems on one attachment made the trip. Here is pic 2 error message with only FS Ver 2 installed.

jmmad · 30 Mar 2009, 14:38

Fredo,
In this image i get the same problem with stretch
but with normal stretch (no control key hit)
Its the same component only thing i just bet it before 90º then try to strech one end.
Then Freeze SU

Thxs

Daniel S · 30 Mar 2009, 15:19

Fredo, not big problems but something that i find using FreeScale 2.0:

Trying to change the deformation before clicking to validate the transformation it makes a unexpected result. I don`t know how to explain this in english so i attach a video showing the problem in the twist and taper tool:
twist-taper.wmv
In the plugin configuration (Icons visible in the toolbar option) I remove the Make Unique, the box rotation, and the rotation (free) icons. Works well but it leaves the icon separators. I attach a image of this too:
A feature of the native protactor-rotate tool is missing... The ability of holding down the primary mouse button, and dragging the protractor is great:

http://sites.google.com/site/sketchupsage/tweak/rotate
This option can be added?

Thank you again for this amazings tools,
Daniel S

DonVid · 30 Mar 2009, 15:53

This is a great addition to SU. Thanks.

I installed the pluging and when I use Radial bending it just rotate the group. I wonder what may be wrong.

Please see attached caption.

Thanks again.

DonVid.

pilou · 30 Mar 2009, 15:54

@unknownuser said:

Just wondering how easy it is to work out which components remain the same
But what hamper to all windows in bulding?

Not so a big deal Stretch before if you want
Just using 2 cool Plugins : "Remove Inner faces" by Wikii, "Clean up Model" by John H. Aughey
That takes 2 seconds for a building of 50 levels (if x = * 50)
Stretch after if you want

Dave R · 30 Mar 2009, 16:03

DonVid,

You need to break the geometry into sections to get the bend. After selecting the tool, hit Tab. Then enter a value in the first line of the dialog box. Someone else suggested 20 which is what I used for the bent text example I posted.

I didn't follow (understand) the thing about the negative value for that box, though.

dtrarch · 30 Mar 2009, 16:17

Fredo

WOW
Thanks for this miracle of code.

$ in the mail-de verdad

dtr

DonVid · 30 Mar 2009, 16:29

Thanks Fredo and Dave for the explanation:

Now it works. This is a true evolution on Architectural Design applications and 3D Modeling.

*The Guggenheim Museum Bilbao had been easier by using this code.

Thanks again.

DonVid

spence · 30 Mar 2009, 16:46

This is an awesome set of tools, soooo nice Appreciate the time and effort into such quality tools, thank you! I'm having lots of fun with this.

fredo6 · 30 Mar 2009, 19:37

@jmmad said:

@unknownuser said:

@unknownuser said:

jmmad wrote:
I only have one problem with the stretch tool some times when I strech something even a simple geometry SU freezes and does not respond, and i have to restart SU.

Fredo6 wrote:
a) Do you apply it to a selection made of embedded components, with several instances (insinde or outside the selection)?
b) Is this something you can reproduce on a given model (if so, can you post it)

Yes here i post the model
It's a component bench with 1 nested component for the legs that repeats 4 times. I don't have any problems when i stretch the model normally, but when i hit control key to stretch from the center it freezes while I am still stretching the component.

Here i attach a image and the corresponding component

Thxs

I cannot reproduce the freeze (see video attached). Is it something always reproducable in your environment?
Can any other user try to reproduce it?

Bench Moder trial.wmv
Fredo

fredo6 · 30 Mar 2009, 20:52

@daniel s said:

Fredo, not big problems but something that i find using FreeScale 2.0:

Trying to change the deformation before clicking to validate the transformation it makes a unexpected result. I don`t know how to explain this in english so i attach a video showing the problem in the twist and taper tool:
[attachment=2:1dhudg9p]twist-taper.wmv[/attachment:1dhudg9p]

Thanks for logging this. One thing I may have forgotten to mention is that the script must break the curves when deformed. Then I have tried to reconstruct them after deformation. apparently, it does not always work. Can you try with the same geometry, but enclosed in a group or component?
I'll try to fix it in the next update

@daniel s said:

In the plugin configuration (Icons visible in the toolbar option) I remove the Make Unique, the box rotation, and the rotation (free) icons. Works well but it leaves the icon separators. I attach a image of this too:
[attachment=1:1dhudg9p]icons.jpg[/attachment:1dhudg9p]

Thanks also for that. I fixed it and it will go the next update

@daniel s said:

A feature of the native protactor-rotate tool is missing... The ability of holding down the primary mouse button, and dragging the protractor is great:
[attachment=0:1dhudg9p]Animation_Rotate_Tool.gif[/attachment:1dhudg9p]
http://sites.google.com/site/sketchupsage/tweak/rotate
This option can be added?

I have to think hard about that. As you notice, the GUI becomes quite complex to manage with all possibilities, Escape, Undos, VCB typing, etc..., and I want to make sure this does not break other things and remain usable. In between, I hope that just hitting Shift to lock the plane will be sufficient.

Thanks again Daniel for your help. Do not hesitate if you find other problems.

Fredo