@ivansmirnov333

You give too much AND not enough information…
Can you explain what the carious bits are, and what you are trying to do, and preferably attached a simple SKP showing the problem, with steps if necessary - currently your movie is unclear…

@rv1974

I can't stop ExtrudeAlongPath being 'mine' - as I wrote it.
However, if you want to fix it then you have my permission to edit it.
Note that it is so old it does not comply with any of the current good coding principles, and even uses some unacceptable $xxx global variables...
That's why it was superseded...

And please note that criticizing my newer Extrude Toolset scores you no plus points at all !

@rv1974

TubeAlongPath has been deprecated forever - PipeAlongPath replaces it.
It is 16 years old and expecting a free plugin to be updated is unrealistic.

I can't access any of them in your linked RAR file, but I see that ExtrudeAlongPath is 14 years old, and isn't even one of my plugins anymore, having been absorbed into my Extrude Toolset using some other name[s]...

These tools never worked on multiple paths and this late request is unlikely to be fruitful -

@rv1974

I just tested PipeAlongPath and it works fine in 2024 - what's your issue...
Do you have the newest v2.2 - but it is 10 years old !

ExtrudeAlongPath - what is that ? It's not part of the current Extrude Toolset and it's not in the PluginStore...

@Javelin
It's in the menu
Tools > Fredo6 Collection...
It list all of the Fredo extensions that you have installed...
What Rich showed was ALL of his installed Fredo extensions.
If you don't have things installed they aren't listed.
If you have the Spline extensions, and also those in the collection bundle installed, then you should see those in that list...
You might need to restart SketchUp to sync everything...

@Javelin
It is a separate paid extension...

Have you actually installed FredoSpline ? - either from its RBZ or using the ExtensionStore³ dialog auto-install...

It will appear under the ...Collection submenu.

BUT do you have the latest version of LibFredo6 installed and the SketchUcation toolset ?

Have you restarted SketchUp after the installation to sync things ?

Have you actually validated your downloaded license file using the License... dialog in the ...Collect > FredoSpline submenu ?

Doing so will also make its Toolbar available...

@BK117 said in RoundCorner at SU 2016:

Noone an idea???

Have some patience.
I'll sure Fredo will reply, but it is the weekend, and he is very busy too...

@Sklik-Rab
If

@union

is an array use

if ! @union[0]...

To see if it has any elements left ?

@JGA
Should work on all older versions...

The following extensions of mine have been updated for compatibility with v2024 Ruby - the deprecated Fixnum has been removed.
https://sketchucation.com/pluginstore?pln=ExtrudeTools - v6.0
https://sketchucation.com/pluginstore?pln=Latticeizer - v1.9
https://sketchucation.com/pluginstore?pln=Roof - v6.0
https://sketchucation.com/pluginstore?pln=SKMtools - v20240425
https://sketchucation.com/pluginstore?pln=TIG_Smart_offset - v4.0

@errror404
Probably No.

If you have SketchUcation tool's ExtensionStore³ you can make a Bundle of the extensions you have in the previous version.
The in the newer version use that Bundle to add/update all of your extensions in that version - using the newest version available.
Unfortunately it only works for extensions you have installed from SketchUcation.

Any extensions you got direct from a developer's site need re-downloading and installing individually.

Any extension you got from the Extension Warehouse must be re-downloaded / installed.
Their bulk update is no longer available.

SketchUcation ExtensionStore³ also notifies you when updates of your current extensions are available, and lets you install them, individually or in bulk.

You can copy the contents of your Plugins folder from the current to the newer version - however, many developers update their code to suit newer versions, so errors might arise with this method, especially if you haven't update extensions fastidiously.
Don't copy over the su_xxx extensions and folders as these are shipped with each version and you might overwrite a newer version...

@valerostudio
Fixed the loading issue in v2024.
Now testing before reissuing...

@valerostudio
I also see this issue.
When you enable a plugin it might load as an extension but it is not active.
It does not appear under the extensions list, toolbars etc.
Sometimes it works, but others it fails.
After a restart it changes as you'd expect.

Something has changed in the API that's preventing this being consistent.
Most odd...
I am looking at the causes and a fix...
It's almost like SketchUp now prevent you from activating just some extensions/plugins on the fly...

@santiagoyagogil
If the previously posted massage, it says 'Access denied' - so then the file is there, but access to 'run' it is stopped by your permissions for that folder.
I suggest you open the C:/Users/santi/AppData/Local/Temp folder and right-click > context-menu > Properties > Security > Edit and ensure that all entries listed have 'Full control' permissions set.
These should trickle down to all enclosed files and subfolders.
Apply to all and close.
It might take a few minutes.
Try SketchUp again...

Si el mensaje publicado anteriormente dice "Acceso denegado", entonces el archivo está ahí, pero el acceso para "ejecutarlo" está detenido por sus permisos para esa carpeta.
Le sugiero que abra la carpeta C:/Users/santi/AppData/Local/Temp y haga clic derecho > menú contextual > Propiedades > Seguridad > Editar y asegúrese de que todas las entradas enumeradas tengan configurados los permisos de "Control total".
Estos deberían llegar a todos los archivos y subcarpetas adjuntos.
Aplicar a todos y cerrar.
Puede que tarde unos minutos.
Prueba SketchUp de nuevo...

@Anton_S
I use this usually

tb.show if tb.get_last_state.abs == 1 # TB_VISIBLE/NEVER

Has the same result...

@FlawinneF
Have you got the newest version of the SketchUcation Tools installed ?
It handles the licensing system.
You can also login to you own licenses on this site using the link in the Extensions > SketchUcation submenu... My Licenses at SketchUcation...
https://sketchucation.com/webshop/my-licences.php
There you can manage all of your licenses...

@arkxell

You haven't explained what you have tried to do, and what has failed...

Here's some simple steps...

Possibility 1
You already have an earlier version of SketchUcation Tools installed.
Open the ExtensionStore³ dialog, find the tools and click on the Install button.
When it completes, restart SketchUp to sync everything.

Possibility 2
You don't have an earlier version of SketchUcation Tools installed.
From our PluginStore, find and download the SketchUcation Tools RBZ file.
Open the native dialog in Extensions > Extension Manager: click the dialog's - Install button, navigate to the downloaded RBZ file and it will install.
When it completes, restart SketchUp to sync everything.

To license an extension you need to have bought a license and kept it somewhere safe on your computer.
You can validate a license in the dialog which opens in the particular Extension's submenu - usually under Tools.

There are more detailed pages on our site about this...

@trainman2001
And... you also need the latest versions of the LibFredo and our SketchUcation toolset for the licensing...

@Sketcheldar
Because you haven't formatted your code properly it's unusable.
Use the </> button to add the correct 'Code' formatting...
Which is three ` at the start & end of your code, on a separate line.