Version 3.9.0c - 02.12.2025

• Fixed a bug when the top tread is flush.

Version 1.4.9 - 02.11.2025

• Added three generic hvac condensor units/sizes into the built-in library (with WeatherGuardTM tops): 30X28_WG, 30x32_WG, 30x40_WG.

These additional variants added per customer request. They are the exact same as the similar sized units other than the addition of the weather guard top. Hopefully this gives enough selection for typical residential AC units however if there is need for any other styles etc... please let me know.

Version 3.9.0 - 02.11.2025

• Enabled zero size intermediate posts (balusters) for glass railing.
• Fixed a bug with floor level winders/landings for landing treads and covers.

Version 3.8.9 - 02.09.2025

• Added preview thumbnails for handrail fittings to the draw and edit menus of the stair tool.
• Fixed a bug with adjacent winders/landings for landing treads and covers.
• Fixed a minor bug with materials for handrail fittings.

Version 1.4.8 - 07.02.2025
Added "hvac" under misc. fixtures.
Added four generic hvac condensor units/sizes into the built-in library: 30X28, 30x32, 30x40, 36x32.

Version 3.8.8b - 02.06.2025

• Added the option for closed stringers.

@gullfo

The licenses will continue to work forever, but no free updates after the five years.

Version 3.8.8 - 02.06.2025

• Added landing treads, tread covers, carpet and stair runners for a winders.
• Added an SIP wall framing option for all wall types.
• Added five additional SIP parameters into the wall Draw and Edit menus.

Tutorial 66 - SIP Walls (8:03 min.)

The lifetime licensing options are now permanently listed on the website:

Medeek Design Inc. - Medeek Wall

Medeek Design Inc. - Medeek Wall

(design.medeek.com)

Just a few more loose ends before I jump back to the Floor plugin.

I would like to enable landing treads for winders, but things get a little interesting when the min. winder length is set to zero. Does this look okay?

Version 3.8.7b - 01.29.2025

• Fixed a bug with the baluster options.
• Enabled a zero stringer option for floating stairs.

Version 3.8.7 - 01.28.2025

• Enabed subtractive geometry for all stair assemblies.
• Added the following two parameters to the baluster sub-menus: Baluster Type (Square, Round, Glass, Cable), Baluster Height.
• Enabled intermediate posts for both glass and cable railing.
• Added the following cable railing options into the Stairs tab of the Global Settings: Cable Railing Spacing, Cable Railing Diameter.
• Added a bottom vertical offset parameter for bottom posts of a stair run.

Tutorial 65 - Cable and Glass Railing (13:26 min.)

Tutorial 64 - Modern Stairs (12:43 min.)

[b]Version 3.8.6[/b] - 01.25.2025

• Added tread covers, carpet and stair runners for T-shaped landings.
• Enabled the option for a single stringer (for modern style stairs).
• Added an option to disable the placeholder for landing/winder framing.
• Added a "GLASS" option for balusters within the built-in baluster materials.
• Added a "None" built-in option for the handrail profile parameter.

Tutorial 63 - Stair Runners and Tread Covers (10:06 min.)

Version 3.8.5 - 01.21.2025

• Updated the skirt boards to accommodate open treads.
• Added tread covers, carpet and stair runners for stairs, landings and winders.

Version 3.8.4 - 01.14.2025

• Added a minimum winder depth parameter for all stair winder types.
• Adjusted the deck handrail algorithm for narrow cap rails (2x4).

Version 3.8.3 - 01.10.2025

• Added a "deck" profile or option for handrails (with balusters) to the stair module.

Tutorial 61- Handrails for Decks (8:51 min.)

Version 3.8.2 - 01.05.2025

• Added balusters to the stair module for vertical and OTP handrails.
• Added newel posts to the stair module for vertical and OTP handrails.

Tutorial 60 - Balusters, Posts and Handrails (16:39)

Tutorial 59 - Multi-Board Treads and Side Spacers (7:15 min.)