Sketchucation Tools 5.0.3
-
And if you erease the SCFLicense folder and file as well, then it starts flawless?
-
Yes. I erased those items and now SketchUp starts again.
-
Can you run the Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command in SketchUp and copy/paste the output into your reply.
-
So to clarify. Please confirm...
You now have no SketchUcation.rb or SketchUcation subfolder in your Plugins folder having temporarily moved them.
You have temporarily moved the SCFLicense subfolder and SCFLicense.rb [usually in your SketchUcation folder] back into your Plugins folder.
You have restarted SketchUp.
Does the licensing set up load ?
It seems not !
If you add the SketchUcation subfolder and its RB file back into Plugins, AND temporarily remove the SCFLicense.rb and subfolder from the SketchUcation subfolder, AND also remove those you moved into Plugins: after a restart of SketchUp does SketchUcation toolbar/submenu load OK ? If so the issue appears to lie with our licensing set up... [@fredo6 ?] -
Fredo6 Plugins Information on 2025-10-13 11:48:18 -0400
- Platform: x86_64-darwin - Ruby: 3.2.2
- Sketchup: 26.0.428
- LibFredo6: v15.5a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: NOT installed
- SCFLicense: NOT installed
- Fredo6 Plugins
Curviloft v2.0a
Curvizard v2.5a
FredoCorner v2.7a
FredoScale v3.6a
FredoSpline v2.6a
FredoTools v4.5c
JointPushPull v4.9a
RoundCorner v3.4a
ToolsOnSurface v2.6a
TopoShaper v2.7a
VisuHole v1.5a
-
@TIG said in Sketchucation Tools 5.0.3:
So to clarify. Please confirm...
You now have no SketchUcation.rb or SketchUcation subfolder in your Plugins folder having temporarily moved them.
You have temporarily moved the SCFLicense subfolder and SCFLicense.rb [usually in your SketchUcation folder] back into your Plugins folder.
You have restarted SketchUp.
Does the licensing set up load ?
It seems not !Correct.
If you add the SketchUcation subfolder and its RB file back into Plugins, AND temporarily remove the SCFLicense.rb and subfolder from the SketchUcation subfolder, AND also remove those you moved into Plugins: after a restart of SketchUp does SketchUcation toolbar/submenu load OK ? If so the issue appears to lie with our licensing set up... [@fredo6 ?]
I did this, and SketchUp still spins on launch.
-
The licensing code hasn't changed in several versions but that seems to now be causing at issue - way back to the lat v4 ?? @fredo6 ??
Other MAC users haven't reported anything... Are you still running v2019 -
@TIG said in Sketchucation Tools 5.0.3:
Are you still running v2019
Is this directed to me or to Fredo? I am running macOS 26.0.1
-
Hmm...If I remove all the extensions except SketchUcation Tools, SketchUp will start without spinning. If I then restore all of Fredo6's extensions, it spins on launch again!
-
Homing in on it. I left the SketchUcation Tools installed, removed half of Fredo6's extensions. This time it launched ok. Here is the report:
Fredo6 Plugins Information on 2025-10-13 12:20:34 -0400
- Platform: x86_64-darwin - Ruby: 3.2.2
- Sketchup: 26.0.428
- LibFredo6: v15.5a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: 5.0.3
- SCFLicense: v7.1a - 72
- Fredo6 Plugins
Curviloft v2.0a - licensed FULL: 29405 - CV1627251325.0G
Curvizard v2.5a - licensed FULL: 29408 - CV1627251325.0G
FredoCorner v2.7a - licensed FULL: 20072 - CV1627251325.0G
FredoScale v3.6a - licensed FULL: 29406 - CV1627251325.0G
FredoSpline v2.6a - licensed FULL: 20074 - CV1627251325.0G - SCFLicense directory present
Signature File: 2021-07-25 18:15:25 -0400
Curviloft: 2025-07-25 09:21:13 -0400
Curvizard: 2025-07-25 09:21:31 -0400
FlatText: 2024-10-04 09:57:56 -0400
FredoCorner: 2021-03-27 15:12:28 -0400
FredoScale: 2022-03-02 09:04:10 -0500
FredoSpline: 2023-03-14 17:08:26 -0400
JointPushPull: 2025-04-02 18:14:32 -0400
RoundCorner: 2022-03-02 09:05:06 -0500
ToolsOnSurface: 2022-03-02 09:05:26 -0500
TopoShaper: 2025-07-25 09:22:24 -0400
VisuHole: 2024-04-17 11:29:50 -0400
-
Took out Fredo6_FredoTools and it launched ok.
- Platform: x86_64-darwin - Ruby: 3.2.2
- Sketchup: 26.0.428
- LibFredo6: v15.5a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: 5.0.3
- SCFLicense: v7.1a - 72
- Fredo6 Plugins
Curviloft v2.0a - licensed FULL: 29405 - CV1627251325.0G
Curvizard v2.5a - licensed FULL: 29408 - CV1627251325.0G
FredoCorner v2.7a - licensed FULL: 20072 - CV1627251325.0G
FredoScale v3.6a - licensed FULL: 29406 - CV1627251325.0G
FredoSpline v2.6a - licensed FULL: 20074 - CV1627251325.0G
JointPushPull v4.9a - licensed FULL: 29404 - CV1627251325.0G
RoundCorner v3.4a - licensed FULL: 29403 - CV1627251325.0G - SCFLicense directory present
Signature File: 2021-07-25 18:15:25 -0400
Curviloft: 2025-07-25 09:21:13 -0400
Curvizard: 2025-07-25 09:21:31 -0400
FlatText: 2024-10-04 09:57:56 -0400
FredoCorner: 2021-03-27 15:12:28 -0400
FredoScale: 2022-03-02 09:04:10 -0500
FredoSpline: 2023-03-14 17:08:26 -0400
JointPushPull: 2025-04-02 18:14:32 -0400
RoundCorner: 2022-03-02 09:05:06 -0500
ToolsOnSurface: 2022-03-02 09:05:26 -0500
TopoShaper: 2025-07-25 09:22:24 -0400
VisuHole: 2024-04-17 11:29:50 -0400
-
And one more test that seems to identify the culprit: If I restore all of Fredo6's stuff except Fredo6_FredoTools, SketchUp launches without spinning.
Fredo6 Plugins Information on 2025-10-13 12:35:51 -0400
- Platform: x86_64-darwin - Ruby: 3.2.2
- Sketchup: 26.0.428
- LibFredo6: v15.5a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: 5.0.3
- SCFLicense: v7.1a - 72
- Fredo6 Plugins
Curviloft v2.0a - licensed FULL: 29405 - CV1627251325.0G
Curvizard v2.5a - licensed FULL: 29408 - CV1627251325.0G
FredoCorner v2.7a - licensed FULL: 20072 - CV1627251325.0G
FredoScale v3.6a - licensed FULL: 29406 - CV1627251325.0G
FredoSpline v2.6a - licensed FULL: 20074 - CV1627251325.0G
JointPushPull v4.9a - licensed FULL: 29404 - CV1627251325.0G
RoundCorner v3.4a - licensed FULL: 29403 - CV1627251325.0G
ToolsOnSurface v2.6a - licensed FULL: 29410 - CV1627251325.0G
TopoShaper v2.7a - licensed FULL: 29407 - CV1627251325.0G
VisuHole v1.5a - licensed FULL: 29409 - CV1627251325.0G - SCFLicense directory present
Signature File: 2021-07-25 18:15:25 -0400
Curviloft: 2025-07-25 09:21:13 -0400
Curvizard: 2025-07-25 09:21:31 -0400
FlatText: 2024-10-04 09:57:56 -0400
FredoCorner: 2021-03-27 15:12:28 -0400
FredoScale: 2022-03-02 09:04:10 -0500
FredoSpline: 2023-03-14 17:08:26 -0400
JointPushPull: 2025-04-02 18:14:32 -0400
RoundCorner: 2022-03-02 09:05:06 -0500
ToolsOnSurface: 2022-03-02 09:05:26 -0500
TopoShaper: 2025-07-25 09:22:24 -0400
VisuHole: 2024-04-17 11:29:50 -0400
-
I meant the SUp version.
I suspect that most users will have newer SUp versions ?
The reason I cited @fredo6 is that he is instrumental in the licensing coding, and I am inviting his input... -
That's really helpful. Thanks. We've made Fredo aware
-
I am running SketchUp 26.0.428, as stated in my first post. I haven't run SU 2019 in years! My computer is an elderly 2019 MacBook Pro, but it is up to date on the latest macOS and SketchUp versions.
-
Joining the thread...
So, it's not Sketchucation Tools nor SCFLicense, but FredoTools.
A few questions:
- Do you launch Sketchup on a custom template or the default template?
- Which Mac version?
-
@fredo6 said in Sketchucation Tools 5.0.3:
Joining the thread...
So, it's not Sketchucation Tools nor SCFLicense, but FredoTools.
A few questions:
- Do you launch Sketchup on a custom template or the default template?
- Which Mac version?
I use a minimally customized template, though this is happening both when opening an existing file last saved from SU 2026 and also when starting a new file from my template.
As stated before, macOS 26.0.1 on a 2019 MacBook Pro 16"
-
So at the moment you have SketchUcation toolset v5.0.3 OK, the SCF licensing OK and most of Fredo's extensions OK.
BUT Fredo'sTools must be disabled for this to get everything else working.
So the issue lies with FredoTools.
Have you tried reinstalling FredoTools from a newly downloaded RBZ ? -
FredoTools does not rely on SCF License. All tools are free.
It might be related to MacOS 26 (Tahoe), which is recent, although recently announced as supported by Sketchup 2026. Especially if you still use an old MackBook on Intel. I don't have Tahoe on my Mac, just Sequoia. So difficult to judge.
-
When you installed to SU2026, did you migrate the plugins with the SU installation?
-
If you get a bugsplat on startup, did you try to send the report to Sketchup? If so, did you get any feedback?
-
-
It just got weirder!
I was shuffling various combinations of extensions in and out in an attempt to track down possible conflicts. This time TIG's split extensions (donut, sausage, splitTools) needed to be excluded to avoid a spin but Fredo_Tools can be present. I am sure that earlier I did not have those TIG tools installed when it spun on Fredo_Tools! They are quite old and I don't use them much, so I can live without them.
Further, when I got it launched with those TIG extensions off and Fredo_Tools on, I opened the SketchUcation Plugin Store extension to see when they were last updated and as soon as the store window opened, SketchUp went into spin!
Something is seriously unstable but I don't know what! Every other extension I had in 2025 is installed and, when SU manages to get running, they appear to work correctly.
To answer your questions,
I had let the new migration manager move extensions across from 2025. Then I used Fredo's check for updates to verify that his were up to date (needed the newer LibFredo6). I haven't tried reinstalling other extensions where I appear to have the latest versions - which I would have to do by going to the Plugin Store via the browser rather than the Plugin Store extension. I'll try that to see what happens.
- OK, I tried downloading and installing the latest Fredo_Tools, and SketchUp is spinning on launch again! Stopped the spin when I removed Fredo_Tools again. Could something corrupt be getting stuck in a cache somewhere? Maybe a corrupted json file?
I don't think it is licenses because Fredo's checker reports the correct ones. Why would that be right yet somehow be causing a spin?
I have not gotten any BugSplats.
Advertisement