SCFLicense: Extension Licensing on Sketchucation
-
@rv1974 said:
Why do you turn simple purchasing to a PhD thesis? For instance ThruPaint
ThruPaint is still free. Fredo is pointing to a as yet non-existent sales page for something not for sale.
Just install the latest Thru Paint and Libfredo.
-
조인트푸쉬앤풀 라이센스끝났다고 해서 구매했는데 에러가떠요!!!
어떻게 해야하죠???? 해결안될수 환불해주세요~!!!!!!!윤선영 2023-07-23 구매
-
You are using an outdated licensing system. Please updated Sketchucation Tools
ExtensionStore | SketchUcation
3D SketchUp Community for Design and Engineering Professionals.
(sketchucation.com)
-
@rich o brien said:
You are using an outdated licensing system. Please updated Sketchucation Tools
ExtensionStore | SketchUcation
3D SketchUp Community for Design and Engineering Professionals.
(sketchucation.com)
오빤 강남스타일 !
-
PLEASE HELP!!!
I'm trying to use the Curviloft extention in Sketchup 2023. I've never used and Fredo plugins and have limited experience with Sketchup. After watching some instructional videos, I thought I figured out how to install the extensions correctly, and I was under the impression that it was available for a 30 day free trial period. Well, I just installed everything about an hour ago, and the very first time I tried to use Curviloft, a message popped up saying my trial period had expired. I've never even used it before! Someone please tell me what I am doing wrong here!
I have no problem paying for the extensions, but I want to try them out first to make sure I'll be able to do what I need to do with them.
-
@cdfrank said:
I just installed everything about an hour ago, and the very first time I tried to use Curviloft, a message popped up saying my trial period had expired.
Did you install the rquired Sketchucation Extension Store tool? Did you install SketchUp 2023 correctly? That requires right clicking the installer file and selecting Run as adminstrator. Did you quit and restart SketchUp after installing the extensions?
-
please help me!
I clicked activate license
However, the license does not apply and an error window appears
-
@dmswn2147 said:
the license does not apply and an error window appears
Its either your network blocking communication or software, like an antivirus stopping.
-
@fredo6 said:
@gus r said:
Fredo fixed it this morning.
Yes I did. Thanks Gus for signaling.
I have a license for this plugin and I am attempting to use on a new computer and getting an error message "not licensed". When I attempt to validate i get a "Error in License validation. License seat exceeded" message."
Please help -
@gm2013 said:
I have a license for this plugin and I am attempting to use on a new computer and getting an error message "not licensed". When I attempt to validate i get a "Error in License validation. License seat exceeded" message."
Please helpYou need to either release seats at your devices using seats or if those devices are running Sketchucation Tool 4.3.1 you can reease seats at https://sketchucation.com/webshop/my-licences.php
-
Hi I use JointPushPull rb on two computers, but recently it doesn't work with messages like attachments.
Check and answer please.
-
@Fredo I´m having a problem with joint push pull, I´ve activated it on two machines, but today, I dont know why?, a message appeared saying that the trial period has expired, I tried to activate it and it says that I have exceeded the seats. I wanted to release seats in my license manager account but this extension doesn´t allow me to do it, other extensions have a box to check it and release seats but joint push pull doesn't.
-
@francisquitof said:
I wanted to release seats in my license manager account but this extension doesn´t allow me to do it, other extensions have a box to check it and release seats but joint push pull doesn't.
I released all seats for JPP
-
@aprjeesus said:
Hi I use JointPushPull rb on two computers, but recently it doesn't work with messages like attachments.
How can I controll my license. Check and answer please.Please run Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command and copy/paste text into reply
-
Hi Fredo,
Great set of plugins, I have an issue with one of my license on JointPushPull. I was unable to release a license due to hardware failure and have all seats taken (3 of 3) and unable to release on of the seats for this plugin - how can this be resolved without access to the computer it references? Thanks, Ben
-
@rich o brien said:
@aprjeesus said:
Hi I use JointPushPull rb on two computers, but recently it doesn't work with messages like attachments.
How can I controll my license. Check and answer please.Please run Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command and copy/paste text into reply
Here is text.
Fredo6 Plugins Information on 2023-08-03 21:29:36 +0900
- Platform: x64-mswin64_140 - Ruby: 2.7.7
- Sketchup: 23.0.419
- LibFredo6: v13.9a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: 4.3.1
- SCFLicense: v6.1a - 72
- Fredo6 Plugins
FredoTools v4.2a
JointPushPull v4.6a - SCFLicense directory present
Signature File: 2023-03-21 10:21:15 +0900
-
Update Libfredo to 14.1a
Use Extensions > Sketchucation > ExtensionStore to launch dialog
Either Search or paste pln=libfredo to install latest version
Restart SketchUp
Download your license files from https://sketchucation.com/webshop/my-licences.php and use Tools > Fredo Collection > Joint PushPull > License... to activate the license file
Repeat for other extensions as needed
-
@rich o brien said:
Update Libfredo to 14.1a
Use Extensions > Sketchucation > ExtensionStore to launch dialog
Either Search or paste pln=libfredo to install latest version
Restart SketchUp
Download your license files from https://sketchucation.com/webshop/my-licences.php and use Tools > Fredo Collection > Joint PushPull > License... to activate the license file
Repeat for other extensions as needed
I did as you told me. but its not working yet.
This time I added a log too.
-
@aprjeesus said:
I did as you told me. but its not working yet.
This time I added a log too.Please run Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command and copy/paste text into your reply
-
@rich o brien said:
@aprjeesus said:
I did as you told me. but its not working yet.
This time I added a log too.Please run Window > Libfredo Settings > Fredo6 Plugins Information for Sketchucation Support menu command and copy/paste text into your reply
here is
Fredo6 Plugins Information on 2023-08-04 21:53:58 +0900
- Platform: x64-mswin64_140 - Ruby: 2.7.7
- Sketchup: 23.0.419
- LibFredo6: v14.1a
- LibFredo6 Binary loaded
- Sketchucation ExtensionStore: 4.3.1
- SCFLicense: v6.1a - 72
- Fredo6 Plugins
FredoTools v4.2a
JointPushPull v4.6a - SCFLicense directory present
Signature File: 2023-03-21 10:21:15 +0900
Advertisement