SCFLicense: Extension Licensing on Sketchucation

eunic3

No me deja utilizar la prueba gratis, que ya acabó el 31 de octubre 2022 y lo acabo de instalar, ¿a fuerzas tengo que comprar una licencia?

jaroslavz

Dear Fredo6 member.

Can you release me those seats from my licences? I cant this because not checkbox with it.

Fredo corner:
Seat ID: 32411; HW ID: UH1651220680.0W; Date of activation: 29/04/2022
Seat ID: 48087; HW ID: KK1653811604.0K; Date of activation: 29/07/2022

Fredo scale:
Seat ID: 34002; HW ID: UF1651996781.0B; Date of activation: 08/05/2022
Seat ID: 37819; HW ID: KK1653811604.0K; Date of activation: 29/05/2022

Thank you.

jaroslavz

Dear, Fredo6.

Can you please release my seats from my purchased license? Thank you. I can not release them because missing check box on this site https://sketchucation.com/webshop/my-licences.php.

Round corner;
Seat ID; 32411; HW ID; UH1651220680.0W; Date of activation; 29/04/2022
Seat ID; 48087; HW ID; KK1653811604.0K; Date of activation; 29/07/2022

Fredo Scale;
Seat ID; 34002; HW ID; UF1651996781.0B; Date of activation; 08/05/2022
Seat ID; 37819; HW ID; KK1653811604.0K; Date of activation; 29/05/2022

RBChimneyRock

I have used Fredo6 when it was free and it was great. Back to SketchUp again with latest version Pro 2022.
Bought the Fredo6 Bundle to get Toposhaper but I can't get it to load into Sketchup even though it shows in Extension Manager.
Went through the instructions meticulously but the licenses are not activating. Even bought TopoShaper standalone and it isn't loading,
Flawless Purchase process (as usual) but really frustrating activation process.
How can I get the bundle to load?
RB

Rich O Brien

@rbchimneyrock said:

but I can't get it to load into Sketchup even though it shows in Extension Manager.

Did you also install Libfredo ?

https://sketchucation.com/pluginstore?pln=LibFredo6

If there are error messages please share them.

RBChimneyRock

I did attempt to load Fredo6 13.7b both directly in Sketchup installing pointing to the RBZ file and also using the direct installer in Sketchucation Extension store.

I can see the Libfredo6 settings page in Sketchup under the Window menu. There is reference to About LibFredo6 v13.7. It even shows up in the Extenions>Sketucation>Plugin Manager and Extensions Manager submenus.

I have stored the licenses in a folder and when I go to SCF Global Status the page it is blank and no way to point it to the license folder. I have confirmed Sketchucation shows all of the licenses.

The only thing I can think of is that I finnally got the standalone TopoShaper plugin to load and it works great. Since TopoShaper is part of the LibFredo6 Bundle could that be preventing it from loading the whole toolset?

Sorry for the newbie question but this is the first plugin I have had trouble with. Have at least 6 or 7 that loaded fine through SketchUp Extension Manager. Love Fredos tools but the activation process is a bit confusing.
Rich

studiodod

Please, how can I fix this problem?
I have SCF License RoundCorner and connect the internet and all plug-in update but the windows show "Sorry - An error occured in the communication with Sketchucation"
many thanks.

Dave R

@studiodod said:

Please, how can I fix this problem?

What version of SketchUp? Your profile lists a non-existent version.

studiodod

@dave r said:

@studiodod said:

Please, how can I fix this problem?

What version of SketchUp? Your profile lists a non-existent version.

my version is 2022 (22.0.354) 64 bit

Thanks

fredo6

@rbchimneyrock said:

I did attempt to load Fredo6 13.7b both directly in Sketchup installing pointing to the RBZ file and also using the direct installer in Sketchucation Extension store.

I can see the Libfredo6 settings page in Sketchup under the Window menu. There is reference to About LibFredo6 v13.7. It even shows up in the Extenions>Sketucation>Plugin Manager and Extensions Manager submenus.

I have stored the licenses in a folder and when I go to SCF Global Status the page it is blank and no way to point it to the license folder. I have confirmed Sketchucation shows all of the licenses.

The only thing I can think of is that I finnally got the standalone TopoShaper plugin to load and it works great. Since TopoShaper is part of the LibFredo6 Bundle could that be preventing it from loading the whole toolset?

Sorry for the newbie question but this is the first plugin I have had trouble with. Have at least 6 or 7 that loaded fine through SketchUp Extension Manager. Love Fredos tools but the activation process is a bit confusing.
Rich

First you need to install the 8 individual plugins.

Then you need to activate the license for each of them, using the purchased license files you received by email after you bought the Bundle license.
The best is to have a look at the PDF instructions in the first post of this thread.

fredo6

@studiodod said:

Please, how can I fix this problem?
I have SCF License RoundCorner and connect the internet and all plug-in update but the windows show "Sorry - An error occured in the communication with Sketchucation"
many thanks.

I think this is simply a problem of Interent communication to the Sektchucation server. It might come from your configuration (proxy, ...). In any case, try to whitelist the Sketchucation domain Sketchucation.com.

studiodod

@fredo6 said:

@studiodod said:

Please, how can I fix this problem?
I have SCF License RoundCorner and connect the internet and all plug-in update but the windows show "Sorry - An error occured in the communication with Sketchucation"
many thanks.

I think this is simply a problem of Interent communication to the Sektchucation server. It might come from your configuration (proxy, ...). In any case, try to whitelist the Sketchucation domain Sketchucation.com.

OK, I will try to do that. Thanks

kang young sang

Hello
I purchased a license, but the following error occurred:
I would appreciate it if you could tell me the solution.

error messge.jpg

fredo6

@kang young sang said:

Hello
I purchased a license, but the following error occurred:
I would appreciate it if you could tell me the solution.

You must have changed something in your computer.
Just follow the instruction, clicking on OK and erase the Signature file.

janosik1

edit : all licenses working now
big thanks to TIG !

janosik1

hi
i bought extension bundle and installed all extensions on my SKP 2019
now i cannot see any of them in global status , why ?

jaroslavz

Hi Fredo6,

Can you please release my seats?
THX.

@jaroslavz said:

Dear, Fredo6.

Can you please release my seats from my purchased license? Thank you. I can not release them because missing check box on this site https://sketchucation.com/webshop/my-licences.php.

Round corner;
> Seat ID; 32411; HW ID; UH1651220680.0W; Date of activation; 29/04/2022
> Seat ID; 48087; HW ID; KK1653811604.0K; Date of activation; 29/07/2022
> 
> Fredo Scale;
> Seat ID; 34002; HW ID; UF1651996781.0B; Date of activation; 08/05/2022
> Seat ID; 37819; HW ID; KK1653811604.0K; Date of activation; 29/05/2022

fredo6

@jaroslavz said:

Can you please release my seats?

This is done.

matsuo_lano

I payed for the 8 plugin bundle, but I received an email from PayPal telling me that the order couldn't be completed and that I will receive a refund. I'd like to continue using the plugins! What could have gone wrong?

janosik1

2 matsuo : you can pay via debet card directly if pay pal method failed , i did it this way but my bank support unique card number for one internet purchase so my real card number was never used directly .