[Plugin][$] JointPushPull Interactive - v4.8a - 30 Mar 24

fredo6

I duplicated a group a several times and tried to PudhPull them from the outside, as the extension allows. The problem is that the extension sees them as components and treats them accordingly.
Do you have the solution for that?

That's a known issue: Freshly copied groups behave like components. I may fix it for JPP.
In the meantime, just enter (double-click) each group to make them unique.

rv1974

I wish Follow Push Pull will be able to remove geometry nicely a-la 3ds max (like shown on attached picture)

fredo6

@rv1974 said:

I wish Follow Push Pull will be able to remove geometry nicely a-la 3ds max (like shown on attached picture)

JPP currently does not delete faces. So, no holes and no clear. This would be complex to do, essentially because JPP is multi-face.

cdurkin

Despite how awesome this plugin is. I'm wondering?? is there a way to further the functionality by allowing the push-pull options to push-pull only lines into planes and maybe even guide points into lines? Perhaps there is already, but I have studied the tools fairly extensively and don't see a way to do this. Adding these features would make these already game-changing tools even better!

Let me know if this is possible, in the works, or if not could it be possible to add it as a feature(s) in the near future updates of the tool?

Thanks

Dave R

@cdurkin said:

... to push-pull only lines into planes ...

There's a plugin that can extrude edges to faces already.

What version of SketchUp are you using? Please complete your profile.

natia556

Hı, I can't add it as a plugin to sketchup 2023

Dave R

@natia556 said:

Hı, I can't add it as a plugin to sketchup 2023

Why? What are you doing to install it? Did you also installed the required LibFredo6? Did you also install the required Sketchucation ExtensionStore tool?
Screenshot - 4_9_2023 , 3_51_58 PM.png

What version of SketchUp are you really using? Your profile indicates a nonexistant version.
Screenshot - 4_9_2023 , 3_51_44 PM.png

seasdes

I noticed that JPP treats group copies as components. Is there a way to overcome this without having to enter each copy. I am running the latest version of JPP. and SU V21

fredo6

@seasdes said:

I noticed that JPP treats group copies as components. Is there a way to overcome this without having to enter each copy. I am running the latest version of JPP. and SU V21

It's a change I need to make. No workaround for the time being, exect than to make the groups unique manually.

seasdes

Ok thanks

Artem Svetozarov

Hey everyone
Could you help me solve the issue? I can’t run push&pull plugin in any way
It was installed from sketchucation store plugin. I restarted the program, restarted the computer, reinstalled the last version of fredolib - the same problem.
There is a toolbar, but the buttons do not react and when I click on them these errors appear
Nevertheless for example the fredo scale plugin works correctly

Fredo6 Plugins Information on 2023-05-03 12:12:13 +0300

Platform: x64-mswin64_140 - Ruby: 2.7.2
Sketchup: 22.0.316
LibFredo6: v13.9a
LibFredo6 Binary loaded
Sketchucation ExtensionStore: 4.3.1
SCFLicense: v6.1a - 72
Fredo6 Plugins

LordOfTheToolbars v2.4a
FredoGuides v2.4a
FredoScale v3.5a
FredoTools v4.3a
JointPushPull v4.6a - licensed FULL
RoundCorner v3.3a
SCFLicense directory present

Signature File: 2023-05-02 13:53:09 +0300
JointPushPull: 2023-05-03 12:11:11 +0300
Error: #<NoMethodError: undefined method wdlg_from_key' for Traductor::Wdlg:Class> c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6webwdlg.rbe:37:in check_instance_displayed'
c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6quicklauncher.rbe:42:in invoke' c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/bootstrap_jointpushpull.rbe:147:in invoke_quick_launcher'
c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_jointpushpull/bootstrap_jointpushpull.rbe:121:in block in startup' c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1469:in command_invoke'
c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1449:in block (2 levels) in build_config_commands' c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1385:in block in add_command'
c:/users/a_sve/appdata/roaming/sketchup/sketchup 2022/sketchup/plugins/!!fredo6_lordofthetoolbars/controller_lordofthetoolbars.rbe:133:in `block in new'

euflypig

My Fredo6 Joint Push Pull control is nowhere to be found on my SU (Sketchup 2020) Mac (OS Ventura). All my Fredo6 plug ins usually show up under Tools > Fredo6 Collection. However, I cannot get the Joint Push Pull (nor the FredoSpline) to show up.

I've tried uninstall and reinstall them again in my extension manager, both Joint Push pull and FredoSpline appear to be "signed" written in green, but either one show up in tools. The other extensions all work fine (Fredo6 Roundcorner, Curviloft, FredoScale, TopoShaper). I have the Fredo6Bundle2022 license purchased.

Does anyone have any solution?

Screenshot 2023-05-11 at 1.25.28 PM.png

Dave R

@euflypig said:

Does anyone have any solution?

Is LibFredo6 and the Sketchucation Extension Store up to date? You need to make sure you have the current versions of both installed. Then restart SketchUp.

whddnjs8474

I can't see the icon image when using the joint push pull

fredo6

@whddnjs8474 said:

I can't see the icon image when using the joint push pull

Could you check that you have uptodate versions of

fredo6

NEW RELEASE: JointPushPull Interactive v4.7a - 10 Jul 23

JointPushPull Interactive 4.7a is a major release includingone fix and one evolution:

Fix for Groups in multiple instances. Now, only the selected group(s) will be processed. They will be made unique on the fly.
Preservation of special curves (circles, arcs, polygons). Whenver possible, JPP reassigns the special status the type of curves.

IMPORTANT: JointPushPull 4.7a requires LibFredo6 14.1 or above

See plugin home page of JointPushPull for Download of JointPushPull.

Main Post of the JointPushPull thread on this forum

Fredo

trajanus96

I found the cause of the license error.
If set the computer's name to a non-English name, the license will not be recognized.
I solved my problem, but the license was applied in duplicate.

Fredo, can you retrieve the license for the above two?
An error occurred in the process of obtaining the license, and the pre-registered license was applied in duplicate. The computer didn't change and only Seat was used up.
I'd like to retrieve the above two licenses.
express one's thanks in advance.
Thank you. fredo

Seat ID: 27003; HW ID: WF1648954173.0G; Date of activation: 03/04/2022
Seat ID: 28476; HW ID: KI1649406241.0Z; Date of activation: 08/04/2022

hayat eltelbany

thanks for sharing

isabellylima

Olá, o plugin não está sendo instalado no meu sketchup 23, o que eu faço?
Já inseri e habilitei ele pelas extensões, mas não está aparecendo o plugin dentro do programa ou na bandeja.
SOSSSS preciso dele.

TIG

It appears under the Tools menu.
But you also need LibFredo and the SketchUcation toolset downloaded and installed, and then SketchUp restarted to start it.
It is also licensed [can be bought through its Tools submenu limk...], so ensure you have everything in place.

Ele aparece no menu Ferramentas.
Mas você também precisa baixar e instalar o LibFredo e o conjunto de ferramentas SketchUcation e, em seguida, reiniciar o SketchUp para iniciá-lo.
Ele também é licenciado [pode ser adquirido através do submenu Ferramentas limk...], portanto, certifique-se de ter tudo no lugar.