[Plugin][$] Curvizard - v2.5a - 01 Apr 24

fredo6

Watch This!
https://www.youtube.com/watch?v=1OV_YF6jsQA

Thanks. Good tutorial video. I noticed that TutorialUp makes very didactic videos, going into some details and some usage that I did not think of myself.

In the case of this video on Curvizard, I think what may be missing is the interactive approach of Curvizard, that is the point-and-click capability to operate transformations (as opposed to pre-selection)

Fredo

CassieFlo

Hi,

I've downloaded this plugin using the SCF Plugin Store (and restarted Sketchup right after) and have LibFredo6 8.1. However I keep getting a message that pops up saying that I have to install LibFredo6 v6.9 or higher to run curvizard...any thoughts on what is going on or how I can get this plugin working?

Thanks in advance!

Cassie

TIG

Assuming you have download both the latest LibFredo and installed it, and also the the latest version of Curvizard...
and you have restarted SketchUp completely...

Then that error is indeed strange.

You profile says: you have a MAC using SketchUp Pro - pre-v6 !
Can you correct it and advise us on your current configuration...

Help us to help you...

CassieFlo

@tig said:

Assuming you have download both the latest LibFredo and installed it, and also the the latest version of Curvizard...
and you have restarted SketchUp completely...

Then that error is indeed strange.

You profile says: you have a MAC using SketchUp Pro - pre-v6 !
Can you correct it and advise us on your current configuration...

Help us to help you...

I have indeed installed both latest versions and restarted SU completely multiple times.

And oops! I am not sure why that was listed as such, I am using SU 2018.

fredo6

Cassie,

I just published an update to Curvizard (v2.1a), as I realized the published version was quite old (2015).

Can you tell me if you still get an error.

Thanks

Fredo

fredo6

NEW RELEASE: Curvizard v2.1a - 28 Mar 18

Curvizard 2.1a is a maintenance release to keep the plugin on par with latest LibFredo6 versions. So upgrade is strongly suggested[/b][/color][/size].

Requirement: LibFredo6 8.1 or above

See main post of this thread for Download of Curvizard.

Fredo

CassieFlo

Fredo-

Yes! That worked, thank you so much!

bambutec

Hi Fredo,

actually ´m using your palette tools a lot. Not the Curvizard yet, but wonder if it would be possible to draw a real spatial contour.
The tutorial did not refer on a spatial type of editing the vertices.

My desire is related to an intuitive process creating contour lines of a hull, which is not yet defined , means from scratch.

The strategy follows many times to find a resulting spatial contour from two related planar contours.

Do you have an idea in terms of Plugin for this ?

Thank you for your work its really great .

Uli

Box

Hi Fredo I'm getting a repeatable error when using Curvizard Convert Edges to Guides.
It happens with any edge, even a single straight line.
This is with 2018 pro all plugins up to date, Libfredo6 8.4g
It works correctly in 2017.
I've attached the error text.

Ruby Error - Curvizard#convert_to_guide - 04-Jul-18 00_03_59.txt

fredo6

NEW RELEASE: Curvizard v2.1c - 03 Jul 18

Curvizard 2.1c is a maintenance release fixing a small bug signaled by Box.

Requirement: LibFredo6 8.1 or above

See main post of this thread for Download of Curvizard.

Fredo

fredo6

NEW RELEASE: Curvizard v2.2a - 23 Nov 18

Requirement: LibFredo6 8.6m or above

Curvizard 2.2a introduces new toolbar icons designed by JClements. They are provided in Vector mode (SVG, PDF) and Raster mode (PNG), and thus should scale for hi-res screens on SketchUp versions >= SU2016 (and all versions on Mac)

Curvizard Toolbar.png

See Plugin Page of Curvizard for Download.

See main post of this thread for discussion on Curvizard.

Fredo

rv1974

Since there's a little hope to see this as core function, I wish we had a commercialFredoSplines with following interactivefeatures:

handles for shape editing
3 types of control points: smooth\corner\bezier
interactive refinement (=segmentation) control
Important for arch modelling: total slope (in %%) AND (optionaly) total height input

pbacot

That can be very useful at times. Thanks!

fredo6

NEW RELEASE: Curvizard v2.4a - 24 Feb 19

Curvizard 2.4a offers 2 new tools[/b][/color] in order to reconstruct Polygons, Arc or Circle from a sequence of edges, when this is possible.

Requirement: LibFredo6 8.8a or above

See Home Page of Curvizard for information and Download.

See Main post of this Curvizard thread for discussion, bug reports and suggestions.

designerbursa

"Convert Guides to Edges" Are you considering adding ?

designerbursa

"Convert to Arc / Circle"
thank you fredo6

fredo6

@designerbursa said:

"Convert Guides to Edges" Are you considering adding ?

This would be different!

Anyway, there are already several plugins doing that, like TIG xLine2Line.

uwesketch

New feature "Convert to Arc/Circle":

Great, thanks a lot Fredo.

Is it correct, that when using "Make curves", that now the curve is converted automatically to an arc as well?
Now I can finally convert the corner edges generated by FredoCorner (using circle rounding) back to arcs, if desired. This then allows adding radius measurements in Sketchup and Layout!
Any chance that this feature is added as an option to FredoCorner for the generation of the corner edges when rounding using circles?

fredo6

@uwesketch said:

Is it correct, that when using "Make curves", that now the curve is converted automatically to an arc as well?

Correct. I may introduce an option to disable this behavior however.

@uwesketch said:

Any chance that this feature is added as an option to FredoCorner for the generation of the corner edges when rounding using circles?

I understand that you ask for creating curves, possibly arcs when applicable.
I assume that only the rounding edges on rounded borders are to be converted to curves.

Fredo

bharralure

Merci beaucoup Fredo

Un outil qui va remplacer avantageusement (parce que beaucoup plus complet) "niline2arc" de Nobnob qui, malgré tout et sans mise à jour depuis 6 ans, fonctionne toujours.
Les améliorations que j'apprécie:

sélection multiple, y compris avec les faces
ne pas être obligé d'entrer à l'intérieur des groupes et composants
l'outil reconnait les cercle ou arc même si l'option "convertir en courbe" à été choisie

peut être est t'il possible de découvrir d'autres astuces ...