[Plugin] Eclate_Deplace (fragmentation-exploded view)

pilou

@C.plassais: sorry a very hard hyperactive end of year
See you soon next year!
[flash=500,405:1je4n8r4]http://www.youtube.com/v/o9698TqtY4A[/flash:1je4n8r4]

MALAISE

Oh Guys, I miss a lot beeing on travel for the last 15 days.

Excellent work, I 'll use it very fast for technical explanations

MALAISE

xrok1

great plugin, thanks. if you could rename this "Exploded View" or "Exploded Model Viewer" or similiar, it would be much more precise and easier to find.

TIG

@xrok1 said:

great plugin, thanks. if you could rename this "Exploded View" or "Exploded Model Viewer" or similiar, it would be much more precise and easier to find.

Edit the script with a plain text editor - like Notepad.exe [osa] - and replace any 'French' text inside "" with your 'English' translation[s]. Keep a copy in case you screw up...
You can adjust a script to say whatever you want....

pilou

@unknownuser said:

if you could rename this "Exploded View"

you speak about the title of the tread?

xrok1

yes, i was refering to the thread title. i don't think anyone searching for an "exploded view" would ever find it currently.

thomthom

He got a point..

xrok1

it would make it a little more clear what the plugin is for as well.

pilou

Done and tested with the search Engine
No someone can find it by the title and by your post

Rich O Brien

Anyone experiencing Bugsplats with SU7.1 and this plugin?

Haven't used since last SU update now it Bugsplat everytime. I've attached the model if anyone want to see if it's just me?

I know i have the components nested in a component but use this plugin when not nested

CherryMax Rivet.skp

Stephan

@unknownuser said:

Anyone experiencing Bugsplats with SU7.1 and this plugin?

Haven't used since last SU update now it Bugsplat everytime. I've attached the model if anyone want to see if it's just me?

I know i have the components nested in a component but use this plugin when not nested

Hello,

Same problem for me with SU7.16860, I get a Bugsplat each time I try to use it.

Any idea?

Rgds,

Stephan

kostas_designer

No bugsplat to me, although i do not understand why some groups stay glued together..
In this example there are only first-class groups:

Eclate_Deplace check.jpg

Rich O Brien

Is this plugin not compatible with the latest SU? Pilou if you've time can you look?

It is behaving strangely with mixed results.

dtrarch

Also see Smustard for Todd Burch's ExplodeImplode script.
Works OK with SU 7.1 and older.

dtr

pilou

[url]some groups stay glued[/url]
The explosion is made by level by level of grouped elements

@unknownuser said:

not compatible with the latest SU?

Normally no reason for that
Have you a file for test it?

c.plassais

Hi all,

just a little precision

plugin Pilou

model = Sketchup.active_model
entities = model.entities
selection = model.selection

xp=100  # Pivot Point (as you want)
yp=100
zp=100

q=50 # Measure of translation (as you want) 

selection.each do |e| # update!
  # Skip all entities that aren't groups or components (replace follow "ComponentInstance" by "Group" if you have groups
  next unless e.is_a? Sketchup;;ComponentInstance  # Now we process the component or group
center = e.bounds.center #Center Point of the grouped object
   xc= center.x
   yc= center.y
   zc= center.z
   
xe=xc #End Point of the grouped object
ye=yc
ze=zc

if xc<xp
xe =xc - q
end

if xc>xp
xe =xc + q
end

if yc<yp
ye =yc - q
end

if yc>yp
ye =yc + q
end

if zc<zp
ze =zc - q
end

if zc>zp
ze =zc + q
end

  point = Geom;;Point3d.new xe,ye,ze
  t = Geom;;Transformation.new point
  # Apply the transformation
  e.transform!(t)
end

plugin modified by me

# Designed December 2009 by C.plassais + Pilou 

# Permission to use this software for any purpose and without fee is hereby granted
# Distribution of this software for commercial purpose is forbidden;

# THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#-----------------------------------------------------------------------------
# Name			;   Eclate_Deplace
# Original Date	;  03 Juil 2009 version 0.0 (thx to TIG, Thomthom)
# Type			;   Plugin
# Description	;   Exploding movements of groups or/and components
# Usage			;   Right Click - Context Menu
# Version 0.3.2
#---------------------------------------------------------------------------------------
# petit plug d'explosion deplacement" de groupes ou de composants

	require 'sketchup.rb'

	def pilou_explose
		myModel = Sketchup.active_model
		myEntities = myModel.entities
		selection = myModel.selection

		if selection.empty?
		    UI.messagebox "Veuillez Selectionner des\nComposants ou des Groupes"
		end

		myModel.start_operation "Deplacement Eclate",true
        group = myModel.active_entities.add_group(selection)
		centre_selec = group.bounds.center
		point_ligne = UI.messagebox "Voulez-matérialiser les déplacement \npar des points et des lignes de construction", MB_YESNO
        (point_ligne == 6) ? (myEntities.add_cpoint (centre_selec)) ;()

        resultat1 = UI.messagebox "Voulez vous faire une copie de l'original", MB_YESNO
		if resultat1 == 6
		    group2 = group.copy
		    group2.explode
		end

        selection = group.explode

        cent_selec_x = centre_selec[0].to_i   # determination
		cent_selec_y = centre_selec[1].to_i   # du centre de
		cent_selec_z = centre_selec[2].to_i   # la selection

       		prompts = ["Ecarter ou centrer/par rapport au pivot", "Deplacement pivot x", "Deplacement pivot y", "Deplacement pivot z", "Coef translation x de 0 a...", "Coef translation y de 0 a...", "Coef translation z de 0 a...", "Groupe Composant les 2"]
		val_defaut = ["Centrer", cent_selec_x, cent_selec_y, cent_selec_z, 1.00, 1.00, 1.00, "Les 2"]
		liste_val = ["Centrer|Ecarter", "", "", "", "", "", "" , "Groupe|Composant|Les 2"]
		results = UI.inputbox prompts, val_defaut, liste_val, "Parametres"
		return if not results
		decent_pivot, deplac_pivot_x, deplac_pivot_y, deplac_pivot_z, coef_trans_x, coef_trans_y, coef_trans_z, group_ou_comp = results

        # Translation des axes suivant unites
        convertit = []
        convertit[0]= 1.inch
        convertit[1]= 1.feet
        convertit[2]= 1.mm
        convertit[3]= 1.cm
        convertit[4]= 1.m/100
        uniteCourante = myModel.options["UnitsOptions"]["LengthUnit"]

        coef_trans_x = coef_trans_x.to_f * convertit[uniteCourante]
        coef_trans_y = coef_trans_y.to_f * convertit[uniteCourante]
        coef_trans_z = coef_trans_z.to_f * convertit[uniteCourante]

        # Calcul de la distance entre le centre d'origine de la selection et le nouveau
        nouv_pivot_x =  cent_selec_x-deplac_pivot_x
        nouv_pivot_y =  cent_selec_y-deplac_pivot_y
        nouv_pivot_z =  cent_selec_z-deplac_pivot_z
             
        case decent_pivot
             when "Ecarter"
                  (point_ligne == 6) ? (
                  myEntities.add_cpoint [(cent_selec_x + nouv_pivot_x), (cent_selec_y + nouv_pivot_y), (cent_selec_z + nouv_pivot_z)]
                  myEntities.add_cline [cent_selec_x, cent_selec_y, cent_selec_z],[(cent_selec_x + nouv_pivot_x), (cent_selec_y + nouv_pivot_y), (cent_selec_z + nouv_pivot_z)]) ; ()

             when "Centrer"
                 nouv_pivot_x =  - nouv_pivot_x
    		     nouv_pivot_y =  - nouv_pivot_y
    		     nouv_pivot_z =  - nouv_pivot_z

                 (point_ligne == 6) ? (
    		     myEntities.add_cpoint [deplac_pivot_x,deplac_pivot_y,deplac_pivot_z]
    		     myEntities.add_cline [cent_selec_x, cent_selec_y, cent_selec_z],[deplac_pivot_x, deplac_pivot_y, deplac_pivot_z]) ; ()

        end
        
        case group_ou_comp
            when "Groupe"
                group_ou_comp = comp_ou_group = Sketchup;;Group
            when "Composant"
                group_ou_comp = comp_ou_group = Sketchup;;ComponentInstance
            else
	           group_ou_comp = Sketchup;;Group
	           comp_ou_group = Sketchup;;ComponentInstance
        end

		selection.each do |e| # debut de la transformation

			next unless (e.is_a? group_ou_comp) or next unless(e.is_a? comp_ou_group)
			centre_objet = e.bounds.center
			centre_objet_x = centre_objet[0].to_i  # Determination
			centre_objet_y = centre_objet[1].to_i  # du centre
			centre_objet_z = centre_objet[2].to_i  # de l'objet

           (centre_objet_x == cent_selec_x) ? (nouv_centobj_x = nouv_pivot_x) ; (nouv_centobj_x = ((centre_objet_x-cent_selec_x) * coef_trans_x) + nouv_pivot_x)
           (centre_objet_y == cent_selec_y) ? (nouv_centobj_y = nouv_pivot_y) ; (nouv_centobj_y = ((centre_objet_y-cent_selec_y) * coef_trans_y) + nouv_pivot_y)
           (centre_objet_z == cent_selec_z) ? (nouv_centobj_z = nouv_pivot_z) ; (nouv_centobj_z = ((centre_objet_z-cent_selec_z) * coef_trans_z) + nouv_pivot_z)

            point_trans = Geom;;Point3d.new nouv_centobj_x,nouv_centobj_y,nouv_centobj_z
            t = Geom;;Transformation.new point_trans
            e.transform!(t)
            
            (point_ligne == 6) ? (
            nouv_centobj = e.bounds.center
			myEntities.add_cpoint (nouv_centobj)
			myEntities.add_cpoint (centre_objet)
			constline = myEntities.add_cline [centre_objet_x, centre_objet_y, centre_objet_z],nouv_centobj
			constline.stipple = ".") ; ()

			myModel.selection.add e

		end
		myModel.commit_operation
	end # pilou_explose

	if( not file_loaded?("Eclate_Deplace.rb") )
        UI.add_context_menu_handler do |context_menu|
	       context_menu.add_separator
	       context_menu.add_item("Eclate_Deplace") { pilou_explose }
        end
        file_loaded("Eclate_Deplace.rb")
	end

Thanks

Christophe

pilou

No problem
Idea Pilou for training Ruby 5%
Realisation Ruby C.Plassais 95%

Box

I'm using the latest version of sketchup and I get a bug splat every time I try to use Eclate.

Even with a simple cube. As soon as you click yes or no on the copy dialog it shuts down and goes to bug splat.

c.plassais

@box said:

I'm using the latest version of sketchup and I get a bug splat every time I try to use Eclate.

Even with a simple cube. As soon as you click yes or no on the copy dialog it shuts down and goes to bug splat.

you should only use Eclate_Deplace with components or groups

kyyu

@unknownuser said:

Anyone experiencing Bugsplats with SU7.1 and this plugin?

Haven't used since last SU update now it Bugsplat everytime. I've attached the model if anyone want to see if it's just me?

I know i have the components nested in a component but use this plugin when not nested

It doesn't bug splat for me, but I am still using SU v7.0.10247. It doesn't do much with that file either, except add one guide point?

I tried it on an ungrouped 3D pushpulled rectangle and also not bug splat. So could be something not compatable with the latest version of sketchup.