[Plugin] Shape Bender Beta
-
After it places the start and end tags, you need to press enter. That might be all it is. Hope that solves it, if not, let me know!
Chris
-
Oh wow, after double checking I had forgotten I am on a different PC without Progress Bar. That was the reason
Thanks for the quick response Chris! -
I have downloaded bender and have used it a couple of times, however it does not curve the ends of the box as it shows on your video tutorial. I am actually bending text, but have used it on a rectangular box as well. Both curve but keep all of the vertical ends at 90 degrees to the original line and do not curve. Are there settings for this that I am not aware of? Also if it matters my straight text was already rotated vertically to be placed on a building facade. Does this matter?
diacovoni
-
I tried to post this earlier, but couldn't find it so sorry it it is in here twice. I have downloaded Shape bender and I have successfully used it on a rectangular box and text, however in both cases the ends of the box and text stay perfectly vertical and do not have a radial curve as shown in the video tutorial. Is there a setting that adjusts this?
diacovoni
-
Hi there, sorry your post took so long to get approved. I think we (the moderators) are on vacation mode a little. We try to get them approved quickly, but today it is taking a quite a few hours.
Well, I am not exactly sure what the problem is. Do you have an image to describe it? My guess is that you are experienceing a known fault with the plugin. It does not bend the first and last segments the same amount as the rest of the segments in the curve. It does this for a few technical reasons - sometiems it is the correct bending solution. But sometimes it is not. So if you post a picture of what you are experiencing, I'll look at it and I'll tell you if it is this same problem. IF it is, there is a bit of a workaround you can try that includes adding an extra segment to the arc in the beginning and the end.
Chris
PS I'm on vacation until Jan 3rd, so I might be slow-ish to respond.
-
I think I figured it out. My text was already rotated vertically on the wall. I read some previous posts where it indicated the script was based on the horizontal red green axis. I placed my text flat on the ground and then had no problem with the curve. All I needed to do after that was rotate it vertically to place on the wall.
Thanks for the response. Hope this helps others in the same situation.
diacovoni
-
Hello, I am a new user and while running the script, I am not able to select any line, be it single straight or curve.
Pls find below the ruby console output:
Error; #<TypeError; can't convert nil into String> C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;161;in `create_cursor' C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;161;in `make_cursors' C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;131;in `activate' C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;1017;in `select_tool' C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;1017Thanks in advance.
-
@xtr3mx7 said:
Hello, I am a new user and while running the script, I am not able to select any line, be it single straight or curve.
Pls find below the ruby console output:
> Error; #<TypeError; can't convert nil into String> > C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;161;in `create_cursor' > C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;161;in `make_cursors' > C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;131;in `activate' > C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;1017;in `select_tool' > C;/Program Files (x86)/Google/Google SketchUp 8/Tools/clf_shape_bender/clf_shape_bender.rb;1017 >Thanks in advance.
It seems it's not finding
../Plugins/clf_shape_bender/curve_pointer.png- you should have these files in the 'clf_shape_bender' subfolder inside Plugins...
-
Hello everyone..
I'm using Google SketchUp Pro 8 . I am unable to make a ramp using shape bender that is 34 metres long and has 1:10 slope. The Shape Bender doesn't bend the ramp as expected. I've attached a video and a model of the ramp.
-
How about this?
-
Arjun,
I think the problem comes in that there needs to be some distortion in the top surface which shape Bender doesn't do. I think NumbThumb's suggestion is a good one. I did it manually because I wanted to see how the shape develops but I think the plugin would be much faster.
Is this what you want as a result?
-
@dave r said:
Is this what you want as a result?
yes i want a ramp like this only..is the edge on the end coming out to be 3.4 metres in height??
-
Yes, it is the same height as the straight ramp you had drawn in the file.
It's on my computer at home and I'm not there at the moment. I could send it to you or post it when I get back.
-
but isn't there an effective way to make the ramp i'm making using shapebender??
-
Thank you TIG for providing the solution. The plugin now works perfectly
This is indeed a very great script. Big cheers to Chris
-
thanx this wonderful Plugin
but it can not work with TIG's [HolePunchTool] Plugin, if punch was loaded, run Bender, SU would Crashed...
-
@unclex said:
thanx this wonderful Plugin
but it can not work with TIG's [HolePunchTool] Plugin, if punch was loaded, run Bender, SU would Crashed...I am working on it...
-
-
There's an updated version of the HolePunch tool available that avoids this clash...
see here for details http://forums.sketchucation.com/viewtopic.php?p=302853#p302853
and the zip's download is here http://forums.sketchucation.com/viewtopic.php?p=271170#p271170
-
@ben ritter said:
Chris, I can hardly keep up with your wonderful scripts. Most importantly though, you are very much appreciated for your kindness to the SU community.
Very well said.
Excellent plugin.
Advertisement