[Plugin] Shape Bender Beta
-
thanks Dave,
If you place the line exactly at the origin z-axis below the shape you will not have an offset.
Charly
-
Its a game of percentages. Think of the arc as being 100%. Then your straight line, however long or short it is is also 100%. And it comes down to how the component matches up to the straight line. If the straight line is drawn precisely from end to end along the component (on the red axis of course), then you could say the component sits along 100% of the straight line. Therefore when it bends, it will become 100% the lengt of the arc.
arc = 1m
line = 1m
component sits on 100% of line (therefore is 1m long)
final shape will remain 1marc = 1m
line = 200m
component sits on 100% of line (200m long)
final bent shape will squish down to 1marc = 1m
line = .5m (50% of arc length)
component sits on 100% of line (0.5m long)
final bent shape will be 1m long -
@charly2008 said:
thanks Dave,
If you place the line exactly at the origin z-axis below the shape you will not have an offset.
Charly
Exactly.
-
Hai Chris
First I must say I am impressed with your work on Sketchup. I was very enthusiastic about your Shapebender. But I stumbled on some problems with it. I tried to make a “real” metric bold; a M10. That’s a 10mm bold with a thread of 1.5 mm /turn. I wanted to use the method of “fret2424” (http://www.youtube.com/watch?v=MKrWDNDd62c )
So I started with half a circle with a radius of 5 mm and I lifted one end 0.75 mm. That is not exactly right, but it was just to try.
I got some very strange results you might like to investigate.
Perhaps I am doing something wrong, but then I would like to know what.
Thanks
-
My guess is that the faces are too small. You might try scaling everything up by 10 or 100, then scale it down afterwards. Can you upload the model here?
-
Hi,
this is a wonderful tool. Here is a test with a wood carving model.
Charly
-
That is precisely the kind of stuff I wrote this for - intricate models that need to be bent to match an actual surface. Bending detailed woodwork to match a curved piece of wood, adding signange/letters to a curving wall, etc. It is definitely a quirky plugin, but once you really get it down solid in your head the process it goes through and how to get what you want, it works pretty well. Thanks for lookig at it,
Chris
-
It can also be misused for other things
-
@chris fullmer said:
My guess is that the faces are too small. You might try scaling everything up by 10 or 100, then scale it down afterwards. Can you upload the model here?
You are so right!! I drew a bolt of 10 meters
and it worked fine.
The only hitch was sketchup itself. It crashed while scaling it down.
But it has a nice autosave, so ...
This was my result.
It's cool!!!
-
You seriously made that with shape bender? Cool!
-
Hi Glenn,
it doesn't work for me!.
Charly
-
What scale are you worjing at there Charlie? Is that life size - so a few mm? If so, it needs to be sacled up because SketchUp does not handle small faces well.
Chris
-
Hi Chris,
it was in mm's. I scaled it up, than it worked.
Charly
-
@chris fullmer said:
You seriously made that with shape bender? Cool!
you see the madness you have unleashed upon us?
added my version: just create the helix and extend a triangle equal to one segment and use shape bender. follow-me doesn't give as nearly a reliable result... then scale down.
-
I am a mac user and a newbie to SU. I really want to use your bending script on mac. Is that possible. I have SU version 8 running on mac.
MANY THANKS
-
Certainly it's possible. Are you having any issues when installing/using it?
-
a very easy way to screw any face:
http://forums.sketchucation.com/viewtopic.php?f=15&t=15784#p122571 -
do ya think you might wanna rephrase that?
-
Hi. I'm trying to bend a helix into following a 3 dimensional path...
- I built the helix with the helix plugin
- I created the set up for Shape bender; Select shape (helix). select line, and select 3D path.
Seems to hang up...???? I get a progress bar: 1%. Expected End Time:?(1 of 1) 1200 test points.
Do I need to keep my paths to two dimensions?
Any assist appreciated.
-
I'm not able to let it work!! maybe for the folder!!! the bar was loaded, but it doesn't work selecting the firt line and the second arc!!
IT WORKS!!!!!!!!!!!!!!
Advertisement