[Plugin][$] FredoScale - v3.6a - 01 Apr 24

Dave R

The signature is out of date

To what signature are you referring? SketchUp says the signature is up to date:
Screenshot - 8_30_2019 , 6_51_58 AM.png

ISAWHIM

Hi guys. I have another question regarding radial bend. As you can see from the image all of the lines denoting brickwork haven't bended as I was expecting. I'm not sure why. Is it a parameter problem or maybe something to do with the model? Its probably something really easy I'm missing

[attachment=0:1s1lyd44]Screenshot 2017-08-10 13.03.15.png[/attachment:1s1lyd44]

You need to split the horizontal lines into segments. The same would happen if you used a circle with only eight segments, it would transform into a funky shape, because the lines connect to the points, and only the points are relocated. (Eg, it will not curve a solid line, it just deforms the locations of the end-points.)

Thus, your windows where they are on the roof-line, that has three segments. The points are relocated, on a curve, and you get a three-segment curve. However, your horizontal lines for the "siding", only have two points, per line. So, the line just connects from point to point, left and right, with no curve on the line, to match the line where the window has broken the line into three segments. Just as you would add more segments to a circle to hide the fact that it is actually just a bunch of lines and angles, to create the illusion of a "curve".

Resolutions...

1: Break the line into a three-segment line, by adding a line with points aligned under the window, where the window points intersect that horizontal line of the roof.

2: For more realism, because that is a rather large curve, you should segment each line into 4-8 segments per line. That way, you will have full curves, retaining the "image/concept", of the original.

This is the reason that SketchUp has no deform tools. When done on simple lines, without adding more segments, you get undesired results. Just as when you attempt three-point perspective, by lowering the camera near the ground and looking up. It always "looks funny", because the building edges are all perfect lines from corner to corner, instead of having a "true curve", as a camera or your eyes see. That is why 3D rendered things, look like 3D rendered things, instead of looking like reality, unless you use post-work deforms or complex multi-segment lines. (As objects such as people have, but buildings normally do not. Adding to the oddity of displaying 3D objects.)

AISmebel

Hello. Please tell me if you can use your plugins FredoScale and VisuHole so that the components do not lose contact with each other?
I do not use these plugin functions because the connection between the components is broken. This is very inconvenient for me and for many users using this plugin.

https://youtu.be/kb0EIps3VC4

fredo6

@aismebel said:

Hello. Please tell me if you can use your plugins FredoScale and VisuHole so that the components do not lose contact with each other?

Application to other component instances is something I can try to manage for VisuHole and FredoScale stretch is some situations.

But be aware that this may not work, because, for instance, you could make a hole in 2 instances of the same component at different location.

That's why I make the instances unique in the general case.

Fredo

AISmebel

@fredo6 said:

@aismebel said:

Hello. Please tell me if you can use your plugins FredoScale and VisuHole so that the components do not lose contact with each other?

Application to other component instances is something I can try to manage for VisuHole and FredoScale stretch is some situations.

But be aware that this may not work, because, for instance, you could make a hole in 2 instances of the same component at different location.

That's why I make the instances unique in the general case.

Fredo

For this, we need components! Work in one component should be displayed in others. Otherwise, I would use groups. And unique component, I can do it myself.
You can add an icon that allows you to make the component unique or change it in all similar components.
The plugin Bolt Maker (Final) does not break the connection between the components.

kubap

Would it be possible to Scale/Stretch by a specified additional lenght? For example if you want to stretch something so it's 20cm longer. Then instead of putting a scale factor you put +20 (or respectively -20 if you want to shorten it by 20cm).[/quote]
The best is that you just hover the handle you wish to move, then type TAB. In the dialog box, you can type formulas, so add a "+20cm" at the end of the current value.[/quote]

Thanks it was there all the time. Sorry it took me so long to reply, I had notifications disabled.

Is it possible to stretch within the component? I mean within it's boundaries, not changing it's outer size but stretching it's inner parts. I'll try to explain it with attached image:

fredo6

@kubap said:

Is it possible to stretch within the component? I mean within it's boundaries, not changing it's outer size but stretching it's inner parts.

This is not supported by FredoScale currently, but this could be an additional feature in the feature.

In the meantime, you can simply use the Sketchup native Move tool to achieve it in most situations. Actually the Stretch tool of FredoScale is based on the native Move tool.

Fredo

kubap

@fredo6 said:

@kubap said:

Is it possible to stretch within the component? I mean within it's boundaries, not changing it's outer size but stretching it's inner parts.

This is not supported by FredoScale currently, but this could be an additional feature in the feature.

In the meantime, you can simply use the Sketchup native Move tool to achieve it in most situations. Actually the Stretch tool of FredoScale is based on the native Move tool.

Fredo

Yes, I use Move for this but I prefer FredoScale, it's more precise and easy to use For example FredoScale works even with stretching a few closed groups, while Move needs everything exploded to polygon level.

Thanks

rv1974

use this:
https://sketchucation.com/pluginstore?pln=t2h_stretch_by_area

kubap

@rv1974 said:

use this:
https://sketchucation.com/pluginstore?pln=t2h_stretch_by_area

Thanks

bharralure

Bonjour Fredo

Lanceur FredoScale ne fonctionne pas sous :
• SU 20.0.373
• FredoScale v3.1a
• LibFredo6 v10.3.b
Les outils (lancés soit depuis le menu contextuel, soit depuis depuis Menu > Outils > FredoScale) fonctionnent

La console affiche le message suivant :

@unknownuser said:

FredoScale_Error
Error: #<TypeError: no implicit conversion of Symbol into Integer>
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/body_lib6quicklauncher.rbe:60:in []' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/body_lib6quicklauncher.rbe:60:in block in initialize'
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/body_lib6quicklauncher.rbe:57:in each' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/body_lib6quicklauncher.rbe:57:in each_with_index'
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/body_lib6quicklauncher.rbe:57:in initialize' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/lib6quicklauncher.rbe:47:in new'
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/lib6quicklauncher.rbe:47:in invoke' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_fredoscale/bootstrap_fredoscale.rbe:444:in invoke_quick_launcher'
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_fredoscale/bootstrap_fredoscale.rbe:291:in block in configure' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1320:in command_invoke'
c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1302:in block (2 levels) in build_config_commands' c:/users/bharr/appdata/roaming/sketchup/sketchup 2020/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1372:in block in add_command'
"Add help menu!"
"create new"
"created"
#Sketchup::Menu:0x000001bb92babab8

Par contre, Lanceur FredoScale fonctionne très bien sous :
• SU 19.3.373
• FredoScale v3.1a
• LibFredo6 v9.5.b, qui n'est pas mis à jour

Est-ce grave Docteur ?

fredo6

@bharralure said:

Lanceur FredoScale ne fonctionne pas sous :
• SU 20.0.373
• FredoScale v3.1a
• LibFredo6 v10.3.b
Les outils (lancés soit depuis le menu contextuel, soit depuis depuis Menu > Outils > FredoScale) fonctionnent

Est-ce grave Docteur ?

Bizarre...J'ai l'impression que FredoScale n'est pas vraiment à jour. Pourrais-tu le réinstaller, en prenant soin de supprimer le repertoire Fredo6_FredoScale auparavant dans le repertoire Plugins de Sketchup.

Fredo

bharralure

Merci pour la réponse rapide.

Après avoir supprimé manuellement le dossier et le fichier du dossier Plugins, je l'ai réinstallé une première fois à l'aide de l'outil SketchUcation (ma méthode habituelle), le lanceur n'a pas fonctionné.
J'ai ensuite supprimé/réinstallé, mais cette fois manuellement depuis le gestionnaire d'extension, sans succès.

J'ai supprimé/réinstallé LibFredo6 en appliquant successivement les 2 méthodes ci-dessus, toufours sans succès.

J'ai téléchargé à nouveau FredoScale et LibFredo6 puis comparé les Hachages SHA-256 sans trouvé de différence avec les versions installées.

Y a-t-il quelque chose d'autre que je puisse faire?

fredo6

@bharralure said:

Y a-t-il quelque chose d'autre que je puisse faire?

N'y aurait-il pas de vieux fichiers de mes plugins qui traînent dans le repertoire Plugin?

bharralure

Je ne vois pas, ou sinon Windows les à bien caché ...
Je viens de lancer l'outil "purger les fichiers obsolètes" depuis Fenêtre > LibFredo6, il n'a rien trouvé.

Bon il ne faut arrêter de ce prendre la tête pour un problème qui n'est pas majeur. Je vais afficher la barre d'outil complète. Elle va prendre plus de place que le lanceur seul, mais c'est le seul inconvénient.

Merci pour l'aide.

bharralure

Bonsoir Fredo,

Je viens d'installer LibFredo6 v10.4.a et là Miracle! le lanceur Fredo Scale fonctionne à nouveau.
Du bon travail comme d'habitude.
Merci

rv1974

Si vous permettez I'd continue in English
Would it be possible to implement 'preserve texture' mode?
In this mode, all texture's transforms (scale,proportions,orientation) would stay untouched.
I'd like it to be as default even in standard scale tool, but Trimble and adding new features don't compose well in these latter days
Thanks

fredo6

@rv1974 said:

Would it be possible to implement 'preserve texture' mode?

Actually, FredoScale does not more or less than what the Sketchup native tool (Scale, Move or deform) would do. Even if it's possible to alter the behavior, I think it would make things complicated because it would have to be an option and would potentially slow down the live deformations (to re-apply texture).
The best in my opinion is that deformation is done before texturing and then use the dedicated tools for texturing or re-texturing.

rv1974

I'll be more precise:
It'd be way more logical if at least Boxing Scaling would preserve textures exactly like your Box stretching (already existing tool! )

@unknownuser said:

The best in my opinion is that deformation is done before texturing and then use the dedicated tools for texturing or re-texturing.

I doubt. Rescale a simple box group without material and then apply some bitmap material. The texture sizing will be wrong.

LostArkitekt

This program isn't without issue. I used the Box Scale to "flatten" a bunch of things so I can bring them into AutoCAD (for our consultants). It creates objects that appear to be there, but then when you go to open them up, they disappear.