[Plugin] Lines to tubes

gilles

Any reference image?

pilou

Some plugins about that are there!

ssokol

Hi , I have problem, Line2Tubes doesn't show up under tools in Sketchup 2014?
In Sketchup 8 works perfect.
Any help?
Thanks

sarkarshomit

@ssokol said:

Hi , I have problem, Line2Tubes doesn't show up under tools in Sketchup 2014?
In Sketchup 8 works perfect.
Any help?
Thanks

+1 to that...have similar problem...wont show up in SU2014...installed it using Sketchucation Plugin store app...installs through that in plugins folder of SU2014...but wont show up anywhere....please help...very useful...kinda missing it...dont want to go back to SU8...

PS: I Read the whole thread and checked that I dont have any older versions installed.

Till then using TIG's pipe along path

TIG

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

dem

Unfortunately, while plugin starts in v2014, it still does not work. Hope Didier wil fix it

upd. oops, im sorry. its was a conflict with old CompoSpray version

TIG

@dem said:

Unfortunately, while plugin starts in v2014, it still does not work. Hope Didier wil fix it

upd. oops, im sorry. its was a conflict with old CompoSpray version
Did you do the temporary edit fix I suggested two posts ago ?

unclebim

@tig said:

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

Thank you! Fixed!

ckho1985

@tig said:

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

Working in Mac… not sure what to do

Rich O Brien

@ckho1985 said:

Working in Mac… not sure what to do

Working? Or not working?

ckho1985

as in I know I could drag n drop the .rb file in windows.
but now I am using a mac in office computer. can't do the drag-n-drop anymore. (or is there a way?)
anyway i can alter the .rbZ file to work?

another suggestion. would be superb if there is a option of having square / rectangular tube rather than circular cylinder only.

Rich O Brien

@ckho1985 said:

as in I know I could drag n drop the .rb file in windows.
but now I am using a mac in office computer. can't do the drag-n-drop anymore. (or is there a way?)

what is stopping you doing the drag and drop?

@ckho1985 said:

anyway i can fix the .rbx file?

.rbx? It should be an .rbx file. Are you using our PluginStore?

@ckho1985 said:

would be superb if there is a option of having square / rectangular tube rather than circular cylinder only

Isn't a 4 sided circle a square?

ckho1985

@rich o brien said:

@ckho1985 said:

as in I know I could drag n drop the .rb file in windows.
but now I am using a mac in office computer. can't do the drag-n-drop anymore. (or is there a way?)

what is stopping you doing the drag and drop?
%(#0040FF)[the Mac I am using is not a personal machine and my user account do not allow to me to gain access to the system and make alterations of softwares.
I can update and install plugins, while I am in the software. but I cannot get to the actual software folder. Maybe there is a way to bypass it that I do not know.]

@ckho1985 said:

anyway i can fix the .rbx file?

.rbx? It should be an .rbx file. Are you using our PluginStore?

I can install .rbz file by install extension, but not drag-drop .rb file.

@ckho1985 said:

would be superb if there is a option of having square / rectangular tube rather than circular cylinder only

Isn't a 4 sided circle a square?

%(#0040FF)[what i meant was a tube allow to choose its facing direction. i.e.; a flat surface facing up like a hand rail.
a rectangular tube with dimension input would help. i.e.; a 100mm x 50mm tube…]

sorry that haven't been thorough

Rich O Brien

Rename .rbz to .zip and extract files/folders. Place into Plugins folders

TIG

@ckho1985 said:

@tig said:

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

Working in Mac… not sure what to do
'Notepad.exe' is the PC's default plain-text editor.
You will also have a similar simple one on your MAC [TextEdit?].
For an even better text-editing tool look at MAC's free TextWrangler, which is like the PC's free Notepad++,exe...
There are several other free ones too...
Never edit a plugin with a word-processor !

keea1111

HI,

I am trying to install lines2tubes and/or pipe along path for Sketch up 2014, and not able to get it in my plugin's menu. Could someone help me figure this out. much thanks, Keea

TIG

How are you trying to install it ?

My PipeAlongPath is v2014 compatible and will install OK from the PluginsStore dialog's AutoInstall or when downloaded and installed from the equivalent rbz from the PluginStore pages...

The v2014 compatibility of Lines2Tubes has been discussed in this and other threads.
There might be a 'compatible version' if you do a little searching...
A simple tweak might even fix it... pending the author getting his proverbial out of his proverbial
See earlier posts in this thread

finhario

@ckho1985 said:

@tig said:

Didier needs to rework his rb file for v2014 compatibility and republish it...

BUT you can do it temporarily for your own use, even though his script is 'packed'.
Open the file lines2tubes.rb in Notepad, and go to the end:
Change
...}.unpack("m")**.to_s**
to read
...}.unpack("m")**[0]**
Save the changes.
Restart SketchUp.

The script will then load and work in v2014 !

This simple fix can be applied to any of Didier's 'packed' scripts that aren't working in v2014.

These edited scripts will also load and work in earlier SketchUp versions too...

Working in Mac… not sure what to do

i do all the steps but still it's not working please help

TIG

@Mario

What have you done exactly ?

The attached version should work on MAC or PC...
I have tested it on both platforms, and it works fine for me !

Compare it to your own effort ??

Remember that the menu item is under Tools NOT Plugins !

lines2tubes.rb

Refka

@tig said:

What have you done exactly ?

The attached version should work on MAC or PC...
I have tested it on both platforms, and it works fine for me !

Compare it to your own effort ??

Remember that the menu item is under Tools NOT Plugins !

Thanks a lot TIG very useful..