[REQ] Displacement ruby

Whaat

I've thought about creating such a script. The main difficulty is getting the pixel (RGB) value from the texture at a given point. If anyone knows how do this, let me know.

ilay7k

Dale, Highfield-map generator?
maybe through ogl libs

solo

Ilay7k, for landscapes and terrains it would be an SU killer for sure, but for other purposes like if you remember Silvershadows method of doing a cobble stone sidewalk, this would be a snap.
It can also be used for product modeling where only one or two surfaces needs a physical relief.

How about this use?

solo

As mentioned above, cobblestones or such mesh could be achieved using a simple bump image and if you have a seamles image like below then a small or low poly mesh can be generated which can be made into a component and tiled to form a cobble road as below without killing the model.

The image:

The resulting mesh:

The mesh made into a component and tiled:

princedragoncok

Your examples are highly convincing solo. I'm all support for a displacement ruby. It seems you already have it however.. how did you create those models?

solo

I used a third party app, Vue 6 xstream and used the displacement feature, then baked it to polygons and exported it as .3ds.
The workflow is a little tedious and was hoping that if we could apply a texture to a given surface then select the surface and have an option to 'turn to mesh' which would then through the miracle coding of someone like Whaat become a 3d mesh with an option to reduce the polys if neccesary (already a ruby)

Just thoughts .... dreams.

Another example.

tbd

@unknownuser said:

getting the pixel (RGB) value from the texture at a given point. If anyone knows how do this, let me know.

some ideas:

convert texture to .raw and read it via ruby file commands (as I did it in 2004 Terolscript)
direct image parsing - too complicated (several formats, compression)
server based - image upload to server, converted to an Array and returned back to Ruby

plot-paris

solo, let me tell you, that your illustrations are impressive. it makes perfectly clear, what you want to achieve with that script and what the benefits are.

I would love to have such a ruby.
like you said:

@solo said:

...but for other purposes like if you remember Silvershadows method of doing a cobble stone sidewalk, this would be a snap.

this would really help to push realism of SketchUp models much further (towards "Silvershadow-realism"... )

juju

OMG, I would SO pay for this, so long as it is not server based.

kwistenbiebel

It's a nice idea.
However, I think current Sketchup will have difficulties with the polycount.

I rather see some advanced uv-mapping tools to get displacement maps on complexer surfaces so we can render displacement with the photoreal render engine of choice.

But I can understand a displacement2mesh plugin could be useful to people that want to see the displacement in their default Sketchup output.

bigstick

What about Didier's heightfield generator script here:- http://www.crai.archi.fr/RubyLibraryDepot/Ruby/em_geo_page.htm
The documentation is here:- http://www.crai.archi.fr/RubyLibraryDepot/Ruby/Heightfield_gen.pdf

I tried it because I wanted to generate a rippled water plane, but couldn't get it to work at all. As they say however, "your mileage may vary".

kwistenbiebel

I didn't know there was a ruby script like that.Thank you for the link Bigstick.

I just tried using Didiers script (heightfield.rb), but it doesn't do anything at all in my case.
I converted a greyscaled displacement .jpg texture to a Ascii .pgm pixel image in Xnview (as suggested in the tutorial) and tried to load it through the ruby. Maybe I am doing something wrong, but I couldn't get it to generate geometry out of it.

As the ruby was created in 2004, maybe it isn't adapted to sketchup 6?

ilay7k

Didier, thank you
i have such problem with loading pgm(in skp 5):
i attach images

Format; P2 (PGM) Width; 828 x Height; 177 Greyscale; 256 levels.
Number of points; 16
Empty mesh initialized.
Mesh altitude range; 100.0
Patch Length X; 0.0476058993229746
Patch Width Y; 0.223693629205114
Altitude Step Z; 0.392156862745098
Create group; Yes
Destination layer; Layer0
Error; #<NoMethodError; undefined method `*' for nil;NilClass>
(eval);196;in `hf_create_points'
(eval);193;in `upto'
(eval);193;in `hf_create_points'
(eval);181;in `upto'
(eval);181;in `hf_create_points'
(eval);28;in `hf_gen'
(eval);324
(eval);324;in `call'

anybodies know any kind console convertor bmp2ansipgm or raw?
add: i use total commander addition - image lister by ivory

contains test.PGM and test.bmp

solo

Irfanview can do it, and it's a free app.

http://www.irfanview.com/

Didier Bur

Hi,

@unknownuser said:

maybe it isn't adapted to sketchup 6?

it is not, you are right. But it could be (one line of code to change...)
I'm testing it right now. But it is sooooo sloooow !
This kind of feature requests a C++ prog IMHO. 100x100 pixels -> 19600 faces, execution time: 2mn (!)

Didier Bur

Hi Ilayk,
The error comes from that the options providers have changed from SU5 to SU6.
If you decrypted the script, go to line 110:
u = opt[3][2]
and change it to:
u = opt[0][2]

That's all, it will work after that,

ilay7k

strange
it's same(can't normally get size of mesh...)

Format; P2 (PGM) Width; 1680 x Height; 1509 Greyscale; 256 levels.
Number of points; 16
Empty mesh initialized.
Mesh altitude range; 100.0
Patch Length X; 23.4485281358547
Patch Width Y; 26.1074792706233
Altitude Step Z; 0.392156862745098
Create group; Yes
Destination layer; Layer0
Error; #<NoMethodError; undefined method `*' for nil;NilClass>
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;196;in `hf_create_points'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;193;in `upto'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;193;in `hf_create_points'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;181;in `upto'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;181;in `hf_create_points'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;28;in `hf_gen'
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;324
D;/Program Files/gsu6/Plugins/heightfield_gen.rb;324;in `call'

Didier Bur

Ok I forgot this one, line 190:

def hf_create_points
opt = Sketchup.active_model.options
# u = opt[3][2] Version 5
u = opt[0][2] # Version 6
...

ilay7k

again >>Empty mesh initialized. / when i load pgm
and errors in opened console(same)
i attach latest images
i modify as you wrote/but it doesn't work

Imagename1.rar

kwistenbiebel

Just checking to see if maybe the heightfield ruby got fixed so it works with SU6 now.
I saw some pieces of code in this thread.
Are we supposed to put those lines in the existing ruby file? ...and will it work?