Joint Push Pull Classic (Old version) - v2.2a - 26 Apr 17
-
@unknownuser said:
@unknownuser said:
Is it possible for this script to explode the curve after it is run? Or at least segment it into parts. It would cut down on a step if you are trying to erase lines for a cleaner face. See image.
I put precisely some code to keep curves on the original surface (to be as less destructive as possible). Note however that the generated corresponding contour is not welded as a curve. Is it the situation you have?
The generated contour is not welded correct.
The original is however. I did another test after installing the latest and I get conflicting results. The top ellipse is broken into 2 welded curves that do not correspond the the new JPP created. The bottom ellipse stays completely intact.
See images.
Again, thanks for this script.
-
Coen
If you scale uniformly a surface, it will never match the original (think of a sphere for instance). However, this is somehow an approximate way to offset its contour, while preserving the overall shape of the surface.
With the first method (only offset the borders), you just use the shape of the outer borders and ignore the ones which are inside. So if you offset by a large distance, you will certainly 'dilute' the shape of the surface.
Both methods have their own benefits and drawbacks, and both can be implemented via a script.
That's what I meant.
Fredo
-
where is this offset tool?????
-
beautiful, Fredo... simply fantastic. Thank you so much for your generosity in sharing!
-
Thanks for a great script.
-
...Here I have applied this script, very pleasant in work.... Thanks once again!
-
Thanks fredo for this wonderfull new tool. Works like a charme and with the use of the icons it seems like if they have always been part of the original program. GREAT scripting !!!
erikB -
WOW!!
All my SU life i've been waiting for this!
Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You Thank You
-
I must add by belated THANKS!!! Fredo for this super, great, etc. tool. As usual, I am a bit late finding such gems, but glad I found it now since next week I will be working on a curvy building project that will now be much easier to model.
Glad to "bump" this file up to the top of the list so maybe more late comers can find it.
Spectacular job - again - many thanks
-
Awsome, yet another great tool for creating things like stairs. And the ofset tool for the curved surfaces would be great too.
-
Great tool the normal push pull reminds me of the extrude tool in Wings 3d which i've always liked.
-
I have just used this Ruby to create a lavender hedge on to of contour grass mounds.
It has saved me days (well maybe hours) in time.
Thanks Mate
Toby
-
wooooow, i want that offset tool :-O,it s a very usefull tool,until this i have to do the contour by hand on curved surfaces. U*re the man!!!
UPDATE After searching i realised that isn t done yet,but i ll wait for it
-
Cher M. Fred,
Your script is awesome. But, I've installed it but it seems to be crashing everytime on my mac. Not sure what I am doing wrong. I got the old version to work fine. This new one - 20 Feb 2008 - loads, icons are crisp and beautiful. I select a face, pull it out - even just one face - and then, progress bar pops, looks nice ... freeze ... pause - su disappears. ;(
Has anyone else seen this? I am running su pro 6/ mac leopard/ intel 2.4mhz/ 3GB ram .... ? What to do?
Perhaps it is my installation ... ?Happy for any advice.
Merci bien en avance et best from Berlin,
Jason
-
Thinkbuild,
I did not test the version on Mac as I have no Mac myself, but I guess there are other users on this platform.
I did not have reports on crash either since I published the script, but that does not mean nobody had any.
The best at this stage is to post the model so that we can have a look -
@ely862me said:
wooooow, i want that offset tool :-O,it s a very usefull tool,until this i have to do the contour by hand on curved surfaces. U*re the man!!!
UPDATE After searching i realised that isn t done yet,but i ll wait for it
ely862me,
what are you talking about? it's out... avail. and works quite well! download it from the ruby repository -
THANK YOU THANK YOU THANK YOU Absolutely unbelievable. It's amazing what autode$k charges $4000.00 for (MAX) is now available for free within sketchup. I sincerly hope the folks autode$k are watching and taking notes. (although I'm sure they aren't)
-
larry
I am sure they are actually, SU has been eating into their CAD business for some time, if Google did not buy SU from @last, I am sure they would have sooner or later.
-
Auto-who?
-
Greetings everyone.
Fred - Sorry! Your work is so wonderful, but, for some reason it seems to be systematically crashing my machine.
The mac makes really nice crash logs in this case. FYI, the full log is attached (because I am not a jedi programmer, I cannot understand it!) but here is some of what it looks like:@unknownuser said:
Exception Type: EXC_BAD_ACCESS (SIGABRT)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000c0000003
Crashed Thread: 0Thread 0 Crashed:
0 libSystem.B.dylib 0x96d930ea __kill + 10
1 libSystem.B.dylib 0x96e0a3f2 raise + 26
2 libSystem.B.dylib 0x96e199af abort + 73
3 com.google.rubyframework 0x00b4be59 rb_check_type + 0
4 com.google.rubyframework 0x00bcc71c sigpipe + 0...
Thread 3:
0 libSystem.B.dylib 0x96d249e6 mach_msg_trap + 10
1 libSystem.B.dylib 0x96d2c1dc mach_msg + 72
2 com.apple.CoreFoundation 0x926270de CFRunLoopRunSpecific + 1806
3 com.apple.CoreFoundation 0x92627d18 CFRunLoopRunInMode + 88
4 com.apple.Foundation 0x90556ac0 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 320
5 com.apple.Foundation 0x904f35ad -[NSThread main] + 45
6 com.apple.Foundation 0x904f3154 NSThread__main + 308
7 libSystem.B.dylib 0x96d55c55 _pthread_start + 321
8 libSystem.B.dylib 0x96d55b12 thread_start + 34...
Please note:
- this is a reproducible crash situation, it happens every time with any jp operation;
- I am running on an intel mac (See above);
- the first (older version) of the plugin seems to run perfectly;
Or perhaps, I am doing something wrong? My suspicion is that there is a conflict with another ruby I have?
Are there any other mac users who have this problem?Hoping all are well and that this can somehow be identified!
best to all from Berlin,
thinkbuild
Advertisement