[Plugin] ReGlue

Pixero

Maybe Fredotools Move along could be helpful?

TIG

@rv1974 said:

Does this API the Great and Powerful, allows to select all the components glued to a preselected face? If yes, maybe the script could take one face, select all the glued and reglue; then go to another face, repeat reglueing, and so on?
ToomyK's version a few posts back does that.
Just replace the text in the RB file with his alternative and save it.
Use a plain-text editor like Notepad++ to do the editing.

TIG

How is the code to determine which of the selected components gets glued to which selected face ?
Please outline the 'logic'...

rv1974

@tig said:

@rv1974 said:

Does this API the Great and Powerful, allows to select all the components glued to a preselected face? If yes, maybe the script could take one face, select all the glued and reglue; then go to another face, repeat reglueing, and so on?
ToomyK's version a few posts back does that.
Just replace the text in the RB file with his alternative and save it.
Use a plain-text editor like Notepad++ to do the editing.

No, TommyK's code works only with one face.
@Pixero, the connection between MoveAlong and reglueing slips away from me.

rv1974

@tig said:

How is the code to determine which of the selected components gets glued to which selected face ?
Please outline the 'logic'...

Thats what I tried to ask you earlier- Whether API allows to detect the components glued to a preselected face. IF the answer is YES, then MAYBE the script could(?) progressevly take face by face and reglue corresponding components.

hdpv

@rv1974
I did this but it’s small script. Select face and components for reglue.

rv1974

@hdpv said:

@rv1974
I did this but it’s small script. Select face and components for reglue.

and components? or face only?

TIG

There is a method:
glued = face.get_glued_instances
And it'd be easy to grep then iterate all of the faces and their glued components etc...
BUT there's no API ' .could_be_glued_instances' method...

BUT here's some possible [pretty much untested] code which might just do it...


ctr=0
model=Sketchup.active_model
faces=model.active_entities.grep(Sketchup;;Face)
comps=model.active_entities.grep(Sketchup;;ComponentInstance).find_all{|e|
  e.definition.behavior.is2d? && ! e.glued_to
}
### collect if comp can glue, but not glued !
cct=comps.length
faces.each{|f|
  plane=f.plane
  norm =f.normal
  comps.dup.each{|e|
    pt=e.transformation.origin
    nm=e.transformation.zaxis
    if pt.distance_to_plane(plane)==0 && norm==nm
      ### glue-able
      cp=f.classify_point(pt)
      if cp==Sketchup;;Face;;PointInside || cp==Sketchup;;Face;;PointOnEdge || cp==Sketchup;;Face;;PointOnVertex
        ### on face so can glue
        e.glued_to=f
        comps.delete(e)
        ctr+=1
        ### reduce tested comps collection for speed
      end
    end
  }
}
puts "\n\nReglued #{ctr} of #{cct}" ### print how many reglued

rv1974

@TIG This plugin reglues multiple components in SU 2022. In v2023 and newer it reglues only one component.
What is the reason for this degradation? Thanks
Screenshot 2024-05-08 112951.png

TIG

@rv1974

This plugin is over a decade old !
As far as I recall, and tell from the code and version, it has always needed a selection of one face and one component to work. for 19 years.
Although I do see from my posts do speaks of one or more components being processed...

As far as I can see this old code is very simplistic... e.g.

It does not check for gluing properties, or face-normal, or Z-axis, or position on the face.plane, or transformation.origin point on the face at all.

If it checked for several components being on the face and sharing the face.normal as their Z-axis etc, then it would be possible the get it to process several gluing components. However, this would require a complete rewrite...

I'll back check...

TIG

Here's v2.0 in the PluginStore...
https://sketchucation.com/pluginstore?pln=Re_Glue
It now allows multiple pre selected component-instances, but still only one preselected face.
These are glued to the face [is possible], any errors or unsuitable instances are reported in the Ruby Console...

rv1974

@TIG Many thanks!

designerbursa

@rv1974

def self.glue_components_to_faces
  model = Sketchup.active_model
  selection = model.selection

  return UI.messagebox("Error: No selection!") if selection.empty?

  faces = selection.grep(Sketchup::Face)
  components = selection.grep(Sketchup::ComponentInstance)

  return UI.messagebox("Error: Select faces and components!") if faces.empty? || components.empty?
  
  model.start_operation("Glue Components to Faces", true)

  begin
    components.each do |component|
      closest_face = find_closest_aligned_face(component, faces)
      component.glued_to = closest_face if closest_face
    end
  ensure
    model.commit_operation
  end
end

def self.find_closest_aligned_face(component, faces)

  component_normal = component.transformation.zaxis
  closest_face = faces.min_by { |face| face.normal.angle_between(component_normal) }
  closest_face

end

rv1974

@designerbursa what do you mean?

designerbursa

@rv1974 I developed the code for pasting on all selected surfaces at once, it would be useful for everyone if it is updated in this way.

rv1974

@designerbursa
I might be missing something but currently I can do it without any plugin

designerbursa

@rv1974 If you can paste without extensions, I really congratulate you...

rv1974

@designerbursa
?
85dfe1a8-ee4c-4834-b2ed-f896caf03ad8-SketchUp_ozyex36IzG.gif

designerbursa

@rv1974 I am using Sketchup 2021 version
Kayıt 2024-06-10 000123.gif

designerbursa

@designerbursa ```

module GlueComponentsToFaces
  extend self

  def glue_components_to_faces
    model = Sketchup.active_model
    selection = model.selection

    if selection.empty?
      return UI.messagebox("Error: No selection! Please select faces and components.")
    end

    faces = selection.grep(Sketchup::Face)
    components = selection.grep(Sketchup::ComponentInstance)

    if faces.empty? || components.empty?
      return UI.messagebox("Error: Select faces and components!")
    end

    model.start_operation("Glue Components to Faces", true)

    begin
      components.each do |component|
        closest_face = find_closest_aligned_face(component, faces)
        component.glued_to = closest_face if closest_face
      end
    rescue => e
      UI.messagebox("An error occurred: #{e.message}")
    ensure
      model.commit_operation
    end
  end

  def find_closest_aligned_face(component, faces)
    component_normal = component.transformation.zaxis
    closest_face = faces.min_by { |face| face.normal.angle_between(component_normal) }
    closest_face
  end
end

# Adding a menu item for ease of use in SketchUp
if not file_loaded?(__FILE__)
  UI.menu("Plugins").add_item("Glue Components to Faces") {
    GlueComponentsToFaces.glue_components_to_faces
  }
  file_loaded(__FILE__)
end


### I haven't tested it on the 2024 version but you can try this, maybe it will work. It works smoothly on my 2021 version